Seagull Models Edge 540 V2 77.5in Wingspan 35-40cc Orange Carbon Fibre RC Aerobatic Plane - SEA383.AE
or 4 interest-free payments with Afterpay
| Brand | Seagull Models |
|---|---|
| Type | RC Aerobatic Plane |
| Skill Level | Experienced |
The Seagull Models Edge 540 V2 (SEA383.AE) is a large-scale ARTF aerobatic RC plane designed for intermediate to advanced pilots, powered by a 35–40cc gasoline engine or equivalent electric setup. Spanning 77.5 inches (1970mm) and stretching 71 inches (1790mm) in length, this is a serious aerobatic aircraft built for pilots ready to push their flying beyond basic sport patterns. The airframe combines balsa, plywood, and upgraded carbon fibre structures — including carbon tubes in the fuselage and wing set — to keep weight down while improving stiffness and durability over the previous version. With most of the assembly already completed at the factory, the Edge 540 V2 is quicker to get airworthy than a traditional build, without sacrificing the structural integrity you'd expect from a plane at this size and performance level.
Key Features
- 77.5-inch wingspan with a wing area of 1023 sq. in (66 sq. dm) and an approximate flying weight of 11.66 lbs (5.3 kg)
- Upgraded carbon fibre construction uses four carbon tubes (5x5x4mm) in the fuselage and four in the wing set for added rigidity
- Fiberglass tube wing spar replaces the paper tube used in the previous version, improving strength and moisture resistance
- Larger ailerons and elevator plus side force generators are included in the aerobatic version for enhanced knife-edge and 3D performance
- Pre-installed super hinges on the wing set, elevator, and rudder speed up final assembly; wings and stabiliser are fully removable for transport
What's Included
- Seagull Models Edge 540 V2 ARTF airframe (SEA383.AE)
- Carbon fibre structural tubes (4x fuselage, 4x wing set)
- Fiberglass control horns
- Side force generators
- Standard aerobatic version hardware pack
What You Need
- 35–40cc gasoline engine, or equivalent electric motor and power system
- 6-channel minimum computer radio transmitter and receiver
- High-torque servos (quantity to suit control surface count)
- Batteries and charger to suit your chosen power and radio setup
- Fuel and associated plumbing if running a gasoline engine