Hangar 9 Ultracote Green RC Aircraft Covering - HANU880

Hangar 9 UltraCote in Green (HANU880) is a heat-shrink covering film for finishing RC aircraft, suitable for both new builds and recovering older airframes. This iron-on film bonds to balsa and built-up structures, then shrinks tight with heat to give a smooth, durable surface on wings, fuselages, and tail surfaces. UltraCote is a well-known choice among RC plane builders thanks to its pre-applied adhesive and consistent finish, making it straightforward to apply with a standard covering iron or heat gun.

Key Features

• Iron-on heat-shrink covering film with a pre-applied adhesive backing
• Shrinks tight under heat to remove wrinkles and conform to curves and compound shapes
• Durable finished surface that seals and protects balsa and built-up airframes
• Solid green colour shade that can be combined with other UltraCote films for custom schemes
• Works with a standard covering iron, trim iron, or heat gun

What's Included

• One roll of Hangar 9 UltraCote covering film in Green (HANU880)

What You Need

• A covering iron or heat gun to apply and shrink the film
• A trim iron for edges and tight areas
• A sharp hobby knife and straight edge for trimming
• A suitable balsa or built-up airframe to cover