Hangar 9 Ultra Stick 60in PNP RC Aircraft Kit - HAN4775
or 4 interest-free payments with Afterpay
This model needs compatible batteries and a charger to run.
| Brand | Hangar 9 |
|---|---|
| Type | RC Aircraft Kit |
| Skill Level | Intermediate |
| Batteries | Required (sold separately) |
The Hangar 9 Ultra Stick PNP (HAN4775) is a 60-inch wingspan balsa and plywood sport trainer finished in UltraCote film, aimed at intermediate pilots who want a capable, versatile fixed-wing model without the hours of bench work that a traditional kit demands. At Plug-N-Play completion level, the motor, ESC, and servos are already installed at the factory, so assembly is measured in minutes rather than an afternoon. The Ultra Stick has a long-proven design that suits a wide range of flying styles, and this version brings that heritage up to date with modern electronics and a no-glue, two-piece plug-in wing system that makes getting to the field and back genuinely straightforward.
Key Features
- Factory-installed 50-size brushless outrunner motor paired with an APC 13x8E electric propeller accepts 3S to 6S LiPo packs, giving you a broad range from relaxed sport flying to aggressive aerobatics.
- Spektrum Avian 60A Smart ESC streams real-time battery voltage, current draw, and motor RPM to compatible Spektrum transmitters and receivers.
- Six 26g digital metal-geared servos are pre-installed throughout the airframe for accurate, consistent control response.
- Operational flaps extend the flight envelope, allowing slower approach speeds and tighter spot landings.
- Float-ready hard points are built into the fuselage for mounting the E-flite Carbon-Z float set, making water operations a future option without any structural modification.
What's Included
- Hangar 9 Ultra Stick PNP airframe (fully covered in UltraCote film)
- 50-size brushless outrunner motor (factory installed)
- Spektrum Avian 60A Brushless Smart ESC, 3Sā6S (factory installed)
- 6 x 26g digital metal-geared servos (factory installed)
- APC 13x8E propeller and spinner (included, not pre-installed)
- Product manual
What You Need
- 6-channel or greater full-range transmitter and compatible receiver
- 6S 22.2V LiPo battery, 3200ā5000mAh with EC5 or IC5 connector (or 3S equivalent for lighter flying)
- Compatible LiPo balance charger