E-flite UMX Air Tractor BNF Basic with AS3X and SAFE Select RC Plane - EFLU16450
or 4 interest-free payments with Afterpay
This model needs compatible batteries and a charger to run.
| Brand | E-flite |
|---|---|
| Type | RC Plane |
| Skill Level | Intermediate |
| Batteries | Required (sold separately) |
The E-flite UMX Air Tractor BNF Basic (EFLU16450) is an ultra-micro RC plane modelled on the iconic agricultural utility aircraft, built for intermediate to experienced RC pilots looking for a capable and characterful low-wing flyer. With a 27.64-inch (702mm) wingspan and 100% factory-assembled foam construction, this Bind-N-Fly model arrives ready to bind to a compatible Spektrum transmitter and fly — no building required. It replicates the real Air Tractor's high-visibility yellow and blue trim scheme with moulded-in panel lines and rivets, and backs up the scale looks with genuinely useful flying features including functional flaps, LED navigation and landing lights, and oversized tires that allow operation from paved, dirt, gravel, and some grass surfaces.
Key Features
- Spektrum AS3X technology provides active stabilisation for a locked-in, smooth feel in varied conditions
- Optional SAFE Select flight envelope protection can be switched on to assist pilots newer to low-wing or scale models
- 2S and 3S LiPo compatible — run a 2S 280–300mAh pack for sport flying or a 3S for more power and unlimited vertical performance without any modifications
- Functional flaps improve slow-speed handling and enable Short Takeoff and Landing (STOL) capability
- Factory-installed LED navigation, strobe, and landing lights add scale realism and improve visibility in the air
What's Included
- E-flite UMX Air Tractor BNF Basic RC plane (factory assembled and painted)
- 5x Spektrum linear servos (installed)
- Spektrum brushless outrunner motor, 1208 2150kv (installed)
- Spektrum control unit with integrated receiver and brushless ESC (installed)
- UMX Air Tractor BNF Basic instruction manual
What You Need
- Full-range 6-channel or greater Spektrum DSMX or DSM2 compatible transmitter (sold separately)
- 2S 7.4V or 3S 11.1V 280–300mAh LiPo battery with JST-RCY connector (sold separately)
- Compatible LiPo battery charger (sold separately)
- Note: if your battery uses a JST-PH connector, a JST-RCY to JST-PH adapter such as the SPMXCA327 is required (sold separately)