Seagull Laser 200 3D 48in Wingspan Almost Ready to Run 30E RC Aerobatic Plane - SEA417

The Seagull Laser 200 3D (SEA417) is a 48-inch wingspan balsa RC aerobatic plane supplied in Almost Ready to Fly (ARF) format for intermediate to advanced pilots. Based on the full-scale Laser 200 competition monoplane, this RC aircraft carries the same angular profile and oversized control surfaces that make the original such a capable 3D performer. The ARF construction means the airframe arrives pre-built and covered, so you fit your own electronics rather than building from a bare kit. Designed around the 30E electric power class, the Seagull Laser 200 suits pilots stepping up into serious 3D flying who want a purpose-built balsa airframe instead of a foam alternative. Expect high-alpha harriers, hovering, snap rolls, and crisp point rolls once it's set up and trimmed.

Key Features

• 48-inch wingspan balsa and ply airframe that stays rigid yet light enough for sustained 3D aerobatics
• Almost Ready to Fly format with the airframe pre-built and pre-covered, leaving only electronics installation
• Large control surfaces and a symmetrical wing section for high-alpha manoeuvres, harriers, and snap rolls
• Designed for the 30E electric power class, giving a clear reference point for motor and ESC selection
• Scale outline based on the full-size Laser 200 aerobatic aircraft

What's Included

• Pre-built and pre-covered balsa airframe
• Canopy
• Landing gear
• Hardware pack
• Instruction manual

What You Need

• Brushless outrunner motor suitable for the 30E class
• Electronic speed controller (ESC) matched to your motor
• Four or more RC servos sized to the manual's recommendations
• 2.4GHz RC transmitter and compatible receiver
• LiPo flight battery to suit your motor setup
• LiPo-compatible battery charger
• Propeller suited to your motor and battery combination
• CA adhesive and basic hobby tools for final assembly