Seagull Models Harrier Funly 3D 60.5in Wingspan ARF 15-20cc RC Aircraft Kit - SEASEA407
Seagull Models Harrier Funly 3D 60.5in Wingspan ARF 15-20cc RC Aircraft Kit - SEASEA407
or 4 interest-free payments with Afterpay
| Brand | Seagull Models |
|---|---|
| Type | RC Aircraft Kit |
| Skill Level | Experienced |
The Seagull Models Harrier Funly 3D (SEA407) is a 60.5-inch wingspan ARF RC aerobatics plane designed for intermediate to advanced pilots looking to fly serious 3D manoeuvres. Built around a laser-cut balsa and plywood airframe and factory-covered in genuine Oracover film, this updated 2025 version strikes a balance between accessible construction and high-performance flying. The Harrier Funly 3D is engineered specifically for 3D-style aerobatics — solid harriers, torque rolls, blenders, and rolling circles are all well within its capabilities. Its light wing loading keeps handling predictable, while the large, stable airframe gives pilots the confidence to push their skills further. Compatible with 15–20cc petrol engines or an equivalent electric power setup (50XX/70E motor at 450–490kv), this RC plane suits pilots ready to step up from basic aerobatics into proper 3D flying.
Key Features
- Laser-cut balsa and plywood airframe delivers a lightweight yet rigid structure suited to repetitive 3D stress loads
- Factory-covered in genuine Oracover film with a high-visibility colour scheme for easy orientation at altitude
- Light wing loading supports stable harriers, torque rolls, blenders, and rolling circles without wing rock
- Detachable wings simplify transport and storage between sessions
- Large top hatch provides straightforward access to battery, receiver, and electronics during setup
- Fiberglass cowl and wheel pants included for a clean, finished appearance
- Compatible with 15–20cc petrol engines or a 50XX (70E) electric motor at 450–490kv with a 17x8 propeller
What's Included
- Laser-cut balsa and plywood airframe, factory-covered in Oracover film
- Fiberglass cowl and wheel pants
- Electric motor mount
- Complete hardware kit
What You Need
- 5-channel radio system with 6 servos
- 15–20cc petrol engine or 50XX (70E) motor (450–490kv) for electric power
- 17x8 propeller (or similar)
- 4000–5500mAh 22.2V LiPo battery (electric setup) and compatible charger
- Fuel system and ignition components (petrol setup)
- CA and epoxy adhesives for final assembly