Seagull Models Oracle Turbo Raven 63in Wingspan ARF 15-20cc Aerobatics/3D RC Plane - SEASEA404

The Seagull Models Oracle Turbo Raven is a 63-inch wingspan ARF RC plane designed for aerobatics and 3D flight, powered by a 15-20cc petrol engine or equivalent electric setup. Style code SEA404 represents the 2024 edition of this large-scale RC aircraft, finished in a striking Cadmium Yellow and Pearl Blue colour scheme that keeps it highly visible in the air. With a balsa and plywood airframe reinforced with carbon fibre, it strikes a good balance between lightweight construction and structural rigidity — exactly what you need for the kind of precise, high-energy flying this model is built for. The plug-in wing design makes transport and assembly straightforward, and the factory-applied film covering means there's minimal prep work before your first flight. This is a capable choice for intermediate to advanced pilots looking for a large-scale aerobatic RC plane that's ready to build and fly without starting from scratch.

Key Features

• 63-inch (160cm) wingspan with a fuselage length of 135.4cm and flying weight of approximately 4kg (8.8 lbs)
• Balsa and plywood airframe with carbon fibre reinforcement keeps the structure light without sacrificing stiffness
• Plug-in wings for faster assembly at the field and easier transport to and from the flying site
• Factory covered in genuine film with airfoil-shaped tail surfaces and a fiberglass cowl and wheel pants finished at the factory
• Fiberglass control horns with ball link linkages throughout for consistent, precise control throws suited to aerobatics and 3D manoeuvres
• Includes electric conversion hardware, making it compatible with both petrol (15-20cc) and high-power electric setups (approx. 110/2000W motor, 85A–100A ESC, 8S–9S LiPo)

What's Included

• Oracle Turbo Raven ARF airframe (factory covered and painted)
• Carbon fibre landing gear
• Scale aluminium tailwheel assembly
• 300ml transparent fuel tank
• PU rubber wheels with plastic hubs
• Full hardware pack
• Electric conversion hardware
• Scale pilot figure, instrument decal, and clear canopy

What You Need

• 15-20cc petrol engine with compatible throttle servo, or electric motor (approx. 2000W/110-size) with 85A–100A ESC and 8S–9S LiPo battery pack
• 4-channel RC radio system with at least 5 servos (not included)
• Compatible propeller suited to your chosen engine or motor
• Fuel (for petrol setup) or LiPo charger and batteries (for electric setup)
• Appropriate adhesives for final assembly (CA glue recommended)