Seagull Models Laser 200 76in Wingspan ARF 35-40cc RC Aerobatic Plane - SEASEA403
Seagull Models Laser 200 76in Wingspan ARF 35-40cc RC Aerobatic Plane - SEASEA403
or 4 interest-free payments with Afterpay
This model needs compatible batteries and a charger to run.
| Brand | Seagull Models |
|---|---|
| Type | RC Aerobatic Plane |
| Skill Level | Experienced |
| Batteries | Required (sold separately) |
The Seagull Models Laser 200 (SEA403) is a 76-inch wingspan ARF aerobatic plane designed for advanced pilots flying 3D and precision aerobatics with a 35–40cc petrol engine or electric power plant. Spanning 193cm and weighing approximately 5.9kg, this large-scale RC aircraft is built around a balsa and balsa-ply airframe reinforced with carbon fibre, giving it the rigidity needed to handle aggressive 3D manoeuvres including hovering, harriers, and snap rolls while keeping weight in check. Released as a new 2025 model, the Laser 200 arrives factory-covered in Oracover film in a high-visibility Cub Yellow and Pearl Blue scheme, with a painted fibreglass cowl and wheel pants already fitted. This is an Almost Ready to Fly kit, so final assembly, radio installation, and power system fitment are required before flight.
Key Features
- 76-inch (193cm) wingspan balsa and balsa-ply construction with carbon fibre reinforcement for a stiff, lightweight airframe suited to 3D and precision aerobatics
- Compatible with 35–40cc petrol engines or an electric setup using a 180Kv motor at 3000–3500W, 80–120A ESC, and a 12S LiPo between 3300–4200mAh
- Plug-in wings with CNC aluminium universal-fastening system and fast-connect struts for straightforward transport and quick field assembly
- Fibreglass control horns with ball-link linkages throughout for precise, consistent control surface response at high deflection angles
- Factory-covered in genuine Oracover film with a high-visibility colour scheme; includes a 3-inch CNC aluminium spinner, pre-prepared 400ml transparent fuel tank with fuel dot and breather valve, and a CNC aluminium tail assembly
What's Included
- Laser 200 ARF airframe (fuselage, plug-in wings, tail surfaces)
- Factory-painted fibreglass cowl and wheel pants
- Carbon fibre landing gear and carbon fibre wing tube
- CNC aluminium universal wing-fastening set and fast-connect wing struts
- 3-inch CNC aluminium spinner
- 400ml transparent fuel tank with fuel tubing, fuel dot, and breather valve
- Electric conversion hardware and general hardware pack
What You Need
- 35–40cc petrol engine OR electric motor (approx. 180Kv, 3000–3500W) with matching 80–120A ESC
- 12S LiPo battery (3300–4200mAh) if flying electric, or suitable fuel supply if flying petrol
- Compatible LiPo charger
- 6-channel radio transmitter and receiver
- 6 servos suitable for large-scale aerobatics
- Receiver battery or BEC
- Propeller appropriate for chosen power system