Seagull Models P-47 Thunderbolt Tarheel Hal Bubble Top 70in ARF Electric Retracts RC Warbird 1/7 Scale - SEASEA398GEAR
Seagull Models P-47 Thunderbolt Tarheel Hal Bubble Top 70in ARF Electric Retracts RC Warbird 1/7 Scale - SEASEA398GEAR
or 4 interest-free payments with Afterpay
| Brand | Seagull Models |
|---|---|
| Type | RC Warbird |
| Scale | 1/7 Scale |
| Skill Level | Intermediate |
The Seagull Models P-47 Thunderbolt "Tarheel Hal" (SEASEA398GEAR) is a 70-inch wingspan, 1/7 scale ARF RC warbird designed for intermediate to advanced pilots running a 30–40cc petrol engine. Based on the iconic P-47D Bubbletop variant flown during WWII, this large-scale RC plane arrives almost-ready-to-fly with an eye-catching factory paint scheme that faithfully reproduces the real "Tarheel Hal" aircraft. The airframe is built from balsa wood with a fully sheeted two-piece wing, and the SEA398GEAR variant ships with three electric retract units pre-fitted — covering main gear and tail gear with working landing gear doors front and rear. At 70 inches across the wing, this is a substantial WWII RC aircraft that rewards experienced builders and delivers impressive scale presence in the air.
Key Features
- 70-inch wingspan balsa and ply airframe with fully sheeted two-piece wing for clean, accurate scale outline
- Factory-applied covering film and a factory-painted fibreglass cowl with detailed dummy radial engine give a near-finished appearance straight from the box
- Three electric retract units included covering main gear and tail gear, with working landing gear doors front and rear
- Slotted scale flaps with internally concealed control horns preserve scale lines and help produce slower, more controlled landing approaches
- Includes drop tanks, rockets, pylons, LED navigation lights, a 1.5-inch aluminium spinner hub, and a pre-prepared 500ml transparent fuel tank with fuel tubing, fuel dot, and breather valve
What's Included
- P-47 Thunderbolt Tarheel Hal ARF airframe (balsa and ply construction, factory covered)
- Factory-painted fibreglass cowl with dummy radial engine
- 3x electric retract units (main gear x2, tail gear x1) with working gear doors
- Drop tanks, rockets, and pylons
- LED navigation lights
- 1.5-inch aluminium spinner hub
- 500ml transparent fuel tank with fuel tubing, fuel dot, and breather valve
- Detachable scale antenna
- Scale plastic cockpit parts with instrument panel detail
- Hardware package
What You Need
- 30–40cc petrol engine (not included)
- 8-channel RC radio system (not included)
- 10 digital servos (not included)
- Compatible ESC or ignition system for chosen engine
- Fuel and associated fuelling equipment
- Propeller suited to chosen engine
- Battery pack for electric retract system and receiver
- Pilot figure (optional, for scale appearance)