Seagull Models Edge 540 V2 77.5in 35-40cc Upgraded Carbon Fibre 3D RC Plane

Seagull Models Edge 540 V2 77.5in 35-40cc Upgraded Carbon Fibre 3D RC Plane - SEA383.3D

$1,149.95 NZD
Sale price  $1,149.95 NZD Regular price 
Skip to product information
Seagull Models Edge 540 V2 77.5in 35-40cc Upgraded Carbon Fibre 3D RC Plane

Seagull Models Edge 540 V2 77.5in 35-40cc Upgraded Carbon Fibre 3D RC Plane - SEA383.3D

Experience Level:Experienced
$1,149.95 NZD
Sale price  $1,149.95 NZD Regular price 

or 4 interest-free payments with Afterpay

BrandSeagull Models
TypeRC Plane
Skill LevelExperienced

The Seagull Models Edge 540 V2 (SEA383.3D) is a large-scale 3D aerobatic RC plane with a 77.5-inch wingspan, designed for experienced pilots flying 35–40cc petrol engines. Based on the real-world Edge 540 competition aerobatic aircraft, this model is built for aggressive 3D flying with upgraded carbon fibre structures throughout the airframe and high-quality hardware across all control linkages and fittings. The striking orange colour scheme gives it strong visual presence in the air, which is genuinely useful when you're pushing the limits at altitude. This is an ARTF (Almost Ready to Fly) large-scale RC aircraft aimed at advanced pilots comfortable with high-performance petrol-powered planes.

Key Features

  • 77.5-inch wingspan delivers the wing area and authority needed for precise 3D aerobatic manoeuvres at larger scales
  • Upgraded carbon fibre structures reinforce key stress points in the airframe, suited to the loads of aggressive 3D and extreme aerobatics
  • Designed specifically for 35–40cc petrol engines, giving the power-to-weight ratio required for vertical climbs, harriers, and knife-edge passes
  • High-quality hardware throughout including control horns, hinges, and linkages built to handle the control throws typical of 3D setups
  • ARTF construction means the major assembly is done — covering, control surfaces, and structure are pre-built, ready for your engine, radio, and servos to be fitted

What's Included

  • Seagull Models Edge 540 V2 airframe (fuselage, wings, tail surfaces) in orange finish
  • Upgraded carbon fibre structural components
  • Hardware pack (hinges, control horns, linkages, and fittings)

What You Need

  • 35–40cc petrol RC aircraft engine
  • Compatible engine mount and exhaust system
  • RC transmitter and receiver (minimum 6 channels recommended for full 3D setup)
  • Servos suitable for large-scale 3D aerobatics (quantity depends on your servo layout preference)
  • Fuel tank and fuel tubing
  • Spinner and propeller suited to your chosen engine
  • Ignition system (if not included with engine)
  • Flight battery for receiver and ignition

You May Also Like