E-Flite Radian 30A Brushless ESC - EFLA1030B

The E-Flite Radian ESC EFLA1030B is a 30-amp brushless electronic speed control designed as a direct replacement for the E-Flite Radian glider. This sensorless brushless ESC features an integrated switch-mode BEC, so it powers your servos and receiver without a separate battery, keeping your Radian light and simple. If you've damaged or need to replace the speed control in your Radian, this is the factory-spec part with the correct connectors already fitted.

Key Features

• 30 amps continuous current with proper airflow and 35 amps burst current for up to 15 seconds
• 3.5A continuous, 5V switch-mode BEC that drives up to 7 analog or 6 digital standard servos and supports most 3-axis stabilization systems
• Programmable settings including motor braking, throttle range, soft start, motor timing, and low voltage cutoff
• Safe power-arm mode prevents accidental starts and auto motor shutdown triggers on signal loss or interference
• Pre-wired with an EC3 connector on the battery input and 3.5mm gold bullet connectors on the motor leads

What's Included

• One E-Flite 30-amp brushless ESC (EFLA1030B) with pre-fitted EC3 battery connector and 3.5mm gold bullet motor connectors

What You Need

• A compatible 3S to 4S Li-Po or 9 to 12-cell Ni-MH/Ni-Cd flight battery
• A brushless motor with matching 3.5mm bullet connectors
• A receiver and servos for your aircraft