Seagull Models PC-6 Pilatus Porter 46-55 2-Stroke 72-82 4-Stroke 1600mm RC Aircraft Kit - SEA107

The Seagull Models PC-6 Pilatus Porter (SEA107) is a 1600mm wingspan ARTF balsa kit designed for intermediate to advanced fixed-wing RC pilots. Based on the iconic Swiss utility aircraft, this scale aeroplane captures the distinctive high-wing, slab-sided profile of the real Pilatus Porter in a well-engineered balsa, plywood, and veneer airframe. At an approximate flying weight of 2.8 to 3.2 kg and a fuselage length of 136.3 cm, it's a substantial scale RC plane that rewards confident flying. Most of the time-consuming construction work is already done — pushrods are pre-made to correct lengths, the motor mount is pre-fitted, and control surface hinges are pre-installed and pinned. That means less time on the workbench and more time at the field.

Key Features

• 1600mm (63 in) wingspan with a wing area of 722.3 sq in for stable, scale flight characteristics
• Balsa, plywood, and veneer construction gives the airframe more rigidity than a typical ARTF without adding unnecessary weight
• Compatible with .46–.55 cu in 2-stroke or .72–.82 cu in 4-stroke glow engines; electric conversion is also possible
• Pre-fitted motor mount, pre-made pushrods, and pre-installed pinned hinges reduce assembly time significantly
• Requires 4-channel RC with 5 servos — suited to intermediate and advanced pilots

What's Included

• PC-6 Pilatus Porter ARTF airframe (pre-built balsa, plywood, and veneer construction)
• Pre-made pushrods
• Pre-fitted motor mount
• Pre-installed and pinned control surface hinges

What You Need

• .46–.55 cu in 2-stroke or .72–.82 cu in 4-stroke glow engine (or suitable electric power system if converting)
• Fuel and glow starter equipment if running a glow engine
• 4-channel RC transmitter and receiver
• 5 servos compatible with your chosen RC system
• Flight battery and compatible charger if electric conversion is chosen
• Appropriate propeller for your chosen engine or motor