Hangar 9 Ultracote Orange RC Aircraft Covering - HANU877

Hangar 9 UltraCote in Orange (HANU877) is a heat-shrink polyester film covering for finishing and recovering RC aircraft. This iron-on covering uses a multi temperature-controlled adhesive and shrinkage system, so it bonds to wood at lower temperatures and shrinks tight at higher ones, giving you control across the whole application. Its ability to both shrink and stretch makes this RC covering material easier to work around tight curves, wingtips, and compound shapes than coverings that only shrink. A patented polymerizing process fuses the orange colour permanently into the polyester film, which prevents colour-layer separation and lets you lift and reposition the covering while you work.

Key Features

• Heat-shrink polyester film covering for wood and built-up RC aircraft
• Adhesion to wood begins at 200 to 220 degrees F
• Shrinkage starts at 300 degrees F with maximum shrinkage at 350 degrees F
• Lightweight at 0.3 oz per square foot
• Fuel proof to glow fuel, gas and smoke oil, and waterproof

What's Included

• One roll of Hangar 9 UltraCote covering in Orange
• Roll length 6.5 feet (78 inches)
• Roll width 23.5 inches

What You Need

• A covering iron or heat gun to apply and shrink the film
• A sealing iron with a covering sock for edges and curves
• A trim knife or sharp blade for trimming
• A suitable airframe to cover