Hangar 9 Ultracote Pearl Blue RC Aircraft Covering - HANU845

Hangar 9 UltraCote (HANU845) is a polyester heat-shrink covering material in Pearl Blue, designed for covering balsa, foam, and wood-framed RC aircraft. UltraCote uses a multi temperature-controlled adhesive and shrinkage system, giving builders precise control over adhesion and final tension. A patented polymerising process permanently fuses the colour into the film itself, preventing colour-layer separation and allowing the covering to be repositioned before final heat bonding. The material is lightweight at 0.30 oz per square foot and is fully fuel-proof against glow fuel, gasoline, and smoke oil, as well as waterproof.

Key Features

• Multi temperature-controlled adhesive system: adhesion to wood begins at 200–220°F, shrinkage onset at 300°F, and maximum shrinkage at 350°F
• Ability to both shrink and stretch makes it well suited for tight curves, compound surfaces, and wingtips
• Patented colour fusion process eliminates colour-layer separation and allows repositioning prior to final bonding
• Fuel-proof to glow fuel, gas, and smoke oil; also waterproof
• Each roll measures approximately 6.5 ft (78") in length and 23.5" in width

What's Included

• One roll of Hangar 9 UltraCote Pearl Blue polyester covering film (approx. 78" x 23.5")

What You Need

• Heat gun or covering iron for application
• Scissors or craft knife for trimming