E-flite 9x4.6 Electric Slow Flyer Eratix 3D RC Aircraft Propeller - EFL01988
or 4 interest-free payments with Afterpay
| Brand | E-flite |
|---|---|
| Type | RC Aircraft Propeller |
The E-flite EFL01988 is a 9 x 4.6 electric slow flyer propeller for the E-flite Eratix 3D, sized for the model's factory motor and power system. Slow flyer props are light, low-pitch propellers made for electric models that fly at low airspeeds, giving strong, responsive thrust for hovering, harriers and other 3D manoeuvres.
3D flying is hard on props, with tip strikes during low passes and landings an everyday hazard, so this RC aircraft propeller is a good spare to carry in the field box. A chipped blade causes vibration that can loosen the motor mount and upset the model's flight controller, so replace damaged props rather than flying them. Slow flyer props are designed for low-speed electric setups, so use this one on the Eratix 3D or a motor within the prop's intended range. Check the EFL01988 part number against your manual before ordering.
Key Features
- 9 inch diameter with a 4.6 inch pitch
- Light slow flyer design for low-speed electric models
- Strong low-speed thrust for 3D manoeuvres
- Sized for the E-flite Eratix 3D power system
- E-flite part number EFL01988
What's Included
- E-flite EFL01988 9 x 4.6 electric slow flyer propeller
What You Need
- E-flite Eratix 3D or a suitable low-speed electric setup
- Prop adaptor or prop saver from your model
- Prop balancer (recommended)