Dubro Tygon Gas Tubing 3ft 1/8in ID RC Aircraft Accessory

Dubro Tygon Gas Tubing 3ft 1/8in ID RC Aircraft Accessory - 800

$23.95 NZD
Sale price  $23.95 NZD Regular price 
Skip to product information
Dubro Tygon Gas Tubing 3ft 1/8in ID RC Aircraft Accessory

Dubro Tygon Gas Tubing 3ft 1/8in ID RC Aircraft Accessory - 800

$23.95 NZD
Sale price  $23.95 NZD Regular price 

or 4 interest-free payments with Afterpay

🚚 Dispatches next business day
BrandDubro
TypeRC Aircraft Accessory

Dubro 800 Tygon gas tubing is a 3 foot length of 1/8 inch inside diameter fuel line for petrol-powered RC aircraft. Tygon is the standard fuel line for gasoline engines, because ordinary silicone tubing isn't suited to petrol and can swell or break down over time.

Use it to plumb the fuel tank, clunk line, fuel dot and carburettor connections on gas-engined models. The 3 foot length gives enough to cut several runs or keep a spare in the field box. Check the 1/8 inch ID against your tank and carburettor fittings before you start, and replace any fuel line that has gone cloudy, stiff or cracked. Route the line away from the exhaust and sharp edges, and avoid tight bends that could kink it and starve the engine of fuel.

Key Features

  • Tygon tubing made for petrol (gasoline) fuel
  • 1/8 inch inside diameter
  • 3 foot (approx. 91cm) length, cut to suit
  • For fuel tanks, clunk lines and carburettor feeds
  • Dubro part number 800

What's Included

  • 1 x Dubro Tygon gas tubing, 3 ft length, 1/8 inch ID

What You Need

  • Sharp hobby knife or tubing cutter for clean cuts
  • Fuel line clips or safety wire to secure connections
  • Petrol-compatible clunk and tank fittings

You May Also Like