Skip to content
Both Auckland and Wellington stores are open
Both Auckland and Wellington stores are open

Kyosho 11252P-C EP/GP ARF: Calmato ALPHA 40 Trainer - Toughlon Spec. (Purple)

by Kyosho
SKU KYO11252P-C
Original price $319.95 - Original price $319.95
Original price
$319.95
$319.95 - $319.95
Current price $319.95

Kyosho 11252P-C EP/GP ARF: Calmato ALPHA 40 Trainer - Toughlon Spec. (Purple)

NOTE: This is a ARF kit and requires assembly. Some parts sold separately- see list below.

KIT CONTENTS
- Pre-assembled fuselage covered in film
- Linkage parts set
- Engine mount
- Fuel tank
- Silicon tube
- Motor mount
- Spinner
- Main, nose gear set
- Cowling for EP
- Decals

DESCRIPTION
This new addition to the Kyosho Calmato ALPHA 40 lineup exhibits an optimal balance of flying stability and direct control response, ideal for flight training. The Calmato reacts calmly to severe control inputs and maintains its posture even with unexpected stalls at low speed to create the best early flying experience for beginner flyers. Film covering is upgraded from PVC to superior quality reverse-side printed Toughlon which delivers both improved durability and lighter weight. Urethane clear coating can also be applied to prevent wrinkling over long time periods and unlike PVC films, dry-type cover film can also be applied for damage repairs. The fuselage features the Calmato’s unique EP/GP convertible design that requires no gluing to dramatically reduce assembly time. New coloring pattern allows coloring on upper and lower surfaces to be changed to improve visibility when flying. The exquisite finish replicates competition model standards and provides beginners and existing Calmato Alpha owners with the 1 model to enjoy all aspects of RC airplane flying.

FEATURES
- Superior stability and direct control response provides an ideal introduction to R/C airplane flight.
- Covered in lightweight Toughlon film that is more resistant to wrinkling and sagging than PVC film.
- Convertible design allows choice of preferred power source, electric motor (EP) or gas engine (GP).
- Glueless design requires no adhesives to complete.
- Main wing halves are joined by aluminum pins and can be separated for easy transportation.
- Vertical stabilizer, servo bed, aileron and rudder are all pre-installed.
- Use of 4-cell 14.8V LiPo battery enables powerful flight.
- Lightweight structure of the balsa fuselage provides calm and easy flight characteristics.
- Comes with pre-assembled fuel tank.
- Flexible pipe linkage rods for rudder and elevator are pre-installed.
- Equipped with pre-installed fuel tank.
- Includes spinner, linkage parts set and lightweight sponge tires.

TECHNICAL SPECIFICATION
Length: 1,300 mm
Width: 1,600 mm
Weight (Approx.): (EP) 2,550 g / (GP) 2,450 g
Motor (EP): 600 - 1,000W brushless outrunner (sold separately)
Engine:  2-Cycle 40 - 46 class engine (sold separately)
Battery (EP): 14.8V 4,000 - 5,000mAh LiPo (sold separately)
Wing Area: 44dm^2
Wing Loading: 55.7 - 55.9 g/dm^2
Airfoil: Original semi-symmetrical
Propeller size: D11 x P7 - D12 x P8 (sold separately)
Tire size: Nose 60 mm / Main 60 mm
Dihedral: 2.5 deg
Side Thrust: 2 deg
R/C system (EP) 4-Ch, 4 servos, 1 ESC (sold separately)
R/C system (GP) 4-Ch, 5 servos (sold separately)

REQUIRED FOR OPERATION
EP Version
- 4 channel, 4 servo RC system for airplanes (standard servo x 4)
- Batteries for transmitter
- 100 mm Y extension cord x 1 for aileron servo
- 200 mm extension cord x 2 for aileron servo
- Propeller
- 600 - 1,000W brushless outrunner motor
- Suitable ESC
- 14.8V 4,000 - 5,000mAh LiPo
-Suitable battery charger
- Battery for receiver if not using ESC BEC with main LiPo

GP Version
- 4-Channel, 5 servo RC system for airplanes (standard servo x 5)
- Batteries for transmitter and receiver
- 100 mm Y extension cord x 1 for aileron servo
- 200 mm extension cord x 2 for aileron servo
- Propeller
- 2 cycle 40 - 46 engine for airplanes
- Starting tools (plug heater, starter, starter battery, charger)
- Glow fuel for airplanes