Skip to content
*** The Retail Store is Open as Normal ***
*** The Retail Store is Open as Normal ***

DLE 30 30cc 2-Stroke Petrol Engine

by DLE
Out of Stock
$439.95
SKU DLE30-R
DLE 30 30cc 2-Stroke Petrol Engine
    This is the DLE 30cc Gasoline Powered Engine with Electronic Ignition
                         and Rear Mounted Carburetor.
 
Convenience and power for quarter scale!
 
With the DLE-30, you get the economy of a gas engine in the size of a glow engine.
 
Electronic ignition provides the spark for fast starting. Timing automatically adjusts for peak power throughout the rpm range. And a made-for-flight design ensures the best power-to-weight ratio for performance. 
 
A rear-mounted pumper carb ensures easier installs and smooth idling before you fly ” and dependable fuel flow while you are flying. 
 
                         
FEATURES: Two sealed bearings on crankshaft-simple design for lighter weight
          Aluminum alloy crankcase
          Rear mounted pumper carburetor ensures easier installation and smooth
            idling and dependable fuel flow during flights
          Fully automatic electronic ignition
          Two year limited warranty through Hobby Services beginning at date
            of purchase
 
INCLUDES: Engine, spark plug, four standoffs, ignition, muffler, muffler
            gasket, two 5x20mm muffler bolts, four 5x60mm mounting bolts
            instruction manual
 
REQUIRES: Gasoline with at least 87 octane rating
          2-cycle oil, mix ratio for this engine is 30 parts gas to one part
            oil and must be followed exactly for warranty consideration
            and optimum performance
          4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
            (separate receiver style pack can be used) (LiPo use requires
            voltage regulator)
          Propeller and field equipment
 
SPECS:    Output Power: 3.7 HP at 8,500 RPM
          Idle Speed: 1,600 RPM
          RPM Range: 1,600-8,500
          Static Thrust: 8.5kg Pulling Force/100 meters altitude
                                7.5kg Pulling Force/1,800 meters altitude
          Displacement: 1.86cu in (30.5cc)
          Bore: 1.42" (36mm)
          Stroke: 1.18" (30mm)
          Compression Ratio: 7.6:1
          Weight: Engine, 2lbs (910g)
                  Muffler, 2.1oz (60g)
                  Ignition, 4.2oz (120g)
          Gasoline/Oil Mixture: 30:1
          Gasoline Octane Rating: 87
          Recommended Propellers: 18x8 for break-in, 18x10, 19x8, 20x8
          Spark Plug: CM6
            Carburetor Adjustments;
          Low Speed Needle: 1.5 turns out as a starting point, adjust for a
            smooth idle and a reliable transition to high throttle
          High Speed Needle: 1.5-2 turns out from closed, adjust needle to peak
            RPM, if engine slows or dies at full throttle, the high-speed
            mixture is likely too lean
          Distance Between Mounting Hole Centers Same Side: 2.1" (54mm)
          Distance Between Mounting Hole Centers Opposite Side: 2.7" (70mm)
          Height from bottom/Crankcase to top of Cylinder Head: 5.4" (138mm)
          Width of Cylinder Head: 2.5" (65mm)
          Distance Between Muffler Mounting Hole Centers: 1.3" (34mm)