{"title":"RC Planes \u0026 Aircraft","description":"","products":[{"product_id":"e-flite-efl36500-night-radian-2-0m-bnf-basic","title":"E-Flite Night Radian 2.0m BNF Basic RC Glider - EFL36500","description":"\u003cp\u003eThe E-flite Night Radian 2.0m BNF Basic (EFL36500) is a 2-metre electric RC glider designed for sport flying, soaring, and dedicated night flying with factory-installed LED lighting throughout the airframe. Building on the well-established Radian motor glider lineage, this updated version adds a telemetry-capable 30A ESC and a higher-visibility trim scheme, making it a capable step up from a trainer or a solid first glider for pilots ready to move beyond basic flying. At a 78.73-inch wingspan and 842g without a battery, the Night Radian 2.0m balances light EPO construction with composite reinforcement to support long, efficient flights. The BNF Basic format means the electronics are pre-installed and bound to a Spektrum receiver — you supply a compatible Spektrum DSMX\/DSM2 transmitter and a 3S LiPo to get airborne.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-installed LED lights across the airframe support 100+ colour, sequence, and timing combinations via a built-in controller, giving clear orientation when flying at dusk or in darkness.\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver includes AS3X stabilisation for smoother handling in wind and thermals, plus optional SAFE Select flight envelope protection to assist with launches and landings.\u003c\/li\u003e\n  \u003cli\u003e30A telemetry-capable ESC works with compatible Spektrum AirWare transmitters and Smart receivers to display real-time motor RPM, current draw, and battery voltage during flight.\u003c\/li\u003e\n  \u003cli\u003eBrushless 3533-960kV 14-pole outrunner motor paired with a folding propeller allows efficient powered climbs to thermal altitude, with flight times of 15–30 minutes or more depending on power use and battery capacity.\u003c\/li\u003e\n  \u003cli\u003eTwo-piece bolt-on wing with a carbon fibre joiner assembles without glue, keeping setup time under an hour and making transport straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Night Radian 2.0m airframe with factory-installed LEDs\u003c\/li\u003e\n  \u003cli\u003eBrushless 3533-960kV outrunner motor (installed)\u003c\/li\u003e\n  \u003cli\u003e30A telemetry-capable brushless ESC with IC3 connector (installed)\u003c\/li\u003e\n  \u003cli\u003e2 x servos (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver with AS3X and SAFE Select (installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 5+ channel Spektrum DSMX\/DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V 1300–2200mAh LiPo flight battery with EC3 or IC3 connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-Flite","offers":[{"title":"Default Title","offer_id":42577661526253,"sku":"EFL36500","price":547.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL36750main2.jpg?v=1756156852"},{"product_id":"christen-eagle-ii-bi-plane-size-75-91-span-1370mm-by-seagull-models","title":"Seagull Models Christen Eagle II 1370mm RC Biplane Kit - SEA104","description":"\u003cp\u003eThe Seagull Models Christen Eagle II is a giant scale RC biplane kit aimed at intermediate to advanced pilots who want a classic aerobatic aircraft. With a 1370mm wingspan and a balsa and ply airframe, this SEA104 model captures the distinctive lines of the Christen Eagle II while delivering the agility expected of a dedicated aerobatic plane. It accepts both glow and electric power, so you can set it up around a two-stroke or four-stroke engine, or convert it to electric flight if you prefer. As an RC aircraft kit rather than a ready-to-fly model, the Christen Eagle II needs building and finishing, plus your own power system and radio gear, making it a satisfying project for experienced fixed-wing flyers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWingspan of 1370mm (53.9 in) with a wing area of 922.3 sq in for stable yet responsive aerobatic flight\u003c\/li\u003e\n  \u003cli\u003eApproximate flying weight of 3.8 to 4.5kg (8.4 to 9.9 lbs) once built and equipped\u003c\/li\u003e\n  \u003cli\u003eFuselage length of 120.5cm (47.4 in)\u003c\/li\u003e\n  \u003cli\u003eDesigned for a 0.75 to 0.91 cu in two-stroke or 0.91 to 1.25 cu in four-stroke engine, with optional electric conversion\u003c\/li\u003e\n  \u003cli\u003eIntermediate to advanced skill level, requiring a 4-channel radio and 6 servos\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built balsa and ply Christen Eagle II airframe components\u003c\/li\u003e\n  \u003cli\u003eHardware pack for assembly\u003c\/li\u003e\n  \u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eA compatible engine: 0.75 to 0.91 cu in two-stroke or 0.91 to 1.25 cu in four-stroke, or an electric power system if converting\u003c\/li\u003e\n  \u003cli\u003e4-channel radio system with 6 servos\u003c\/li\u003e\n  \u003cli\u003eReceiver and flight battery\u003c\/li\u003e\n  \u003cli\u003ePropeller, fuel and field equipment as required\u003c\/li\u003e\n  \u003cli\u003eGlue and basic building tools to complete assembly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":42613577973997,"sku":"SEA104","price":821.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA104.jpg?v=1762827063"},{"product_id":"hangar-9-han4775-ultra-stick-pnp-60-1-52m","title":"Hangar 9 Ultra Stick 60in PNP RC Aircraft Kit - HAN4775","description":"\u003cp\u003eThe Hangar 9 Ultra Stick PNP (HAN4775) is a 60-inch wingspan balsa and plywood sport trainer finished in UltraCote film, aimed at intermediate pilots who want a capable, versatile fixed-wing model without the hours of bench work that a traditional kit demands. At Plug-N-Play completion level, the motor, ESC, and servos are already installed at the factory, so assembly is measured in minutes rather than an afternoon. The Ultra Stick has a long-proven design that suits a wide range of flying styles, and this version brings that heritage up to date with modern electronics and a no-glue, two-piece plug-in wing system that makes getting to the field and back genuinely straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-installed 50-size brushless outrunner motor paired with an APC 13x8E electric propeller accepts 3S to 6S LiPo packs, giving you a broad range from relaxed sport flying to aggressive aerobatics.\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 60A Smart ESC streams real-time battery voltage, current draw, and motor RPM to compatible Spektrum transmitters and receivers.\u003c\/li\u003e\n  \u003cli\u003eSix 26g digital metal-geared servos are pre-installed throughout the airframe for accurate, consistent control response.\u003c\/li\u003e\n  \u003cli\u003eOperational flaps extend the flight envelope, allowing slower approach speeds and tighter spot landings.\u003c\/li\u003e\n  \u003cli\u003eFloat-ready hard points are built into the fuselage for mounting the E-flite Carbon-Z float set, making water operations a future option without any structural modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHangar 9 Ultra Stick PNP airframe (fully covered in UltraCote film)\u003c\/li\u003e\n  \u003cli\u003e50-size brushless outrunner motor (factory installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 60A Brushless Smart ESC, 3S–6S (factory installed)\u003c\/li\u003e\n  \u003cli\u003e6 x 26g digital metal-geared servos (factory installed)\u003c\/li\u003e\n  \u003cli\u003eAPC 13x8E propeller and spinner (included, not pre-installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-channel or greater full-range transmitter and compatible receiver\u003c\/li\u003e\n  \u003cli\u003e6S 22.2V LiPo battery, 3200–5000mAh with EC5 or IC5 connector (or 3S equivalent for lighter flying)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hangar 9","offers":[{"title":"Default Title","offer_id":43585439596781,"sku":"HAN4775","price":1707.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/HAN4775.jpg?v=1762834507"},{"product_id":"e-flite-49500-valiant-1-3m-bnf-basic-with-as3x-and-safe-select","title":"E-Flite Valiant 1.3m BNF Basic with AS3X and SAFE Select RC Plane - EFL49500","description":"\u003cp\u003eThe E-Flite Valiant 1.3m (EFL49500) is a Bind-N-Fly Basic high-wing park flyer suited to pilots who want a stable, versatile RC plane that can handle both relaxed cruising and light aerobatics. Modelled on the larger Hangar 9 Valiant 30cc ARF, it retains the inherent stability of the classic high-wing layout while adding larger control surfaces for a sportier response when you want it. With a 1350mm (53-inch) wingspan and EPO foam construction, this RC aircraft arrives largely ready to fly — the brushless motor, ESC, servos, and AS3X receiver are all pre-installed. You just need to bind it to a compatible Spektrum transmitter, fit a 3S LiPo battery, and fly.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpektrum AR631 6-channel AS3X receiver smooths out wind and turbulence for a stable, precise feel in the air\u003c\/li\u003e\n  \u003cli\u003eOptional SAFE Select technology adds pitch and bank angle limits plus automatic self-leveling — activated by changing the bind sequence, no programming needed\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps installed from the factory, useful for slower approaches and practising touch-and-go landings\u003c\/li\u003e\n  \u003cli\u003e480-size brushless outrunner motor (960Kv) paired with a 30A telemetry-capable ESC delivers strong performance across a wide battery range\u003c\/li\u003e\n  \u003cli\u003eBattery compartment accepts 1300mAh to 3000mAh 3S LiPo packs, and an optional float set is available separately for water operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-Flite Valiant 1.3m BNF Basic RC plane (pre-installed motor, ESC, servos, and AS3X receiver)\u003c\/li\u003e\n  \u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 5-channel or greater DSMX\/DSM2 compatible transmitter (not included)\u003c\/li\u003e\n  \u003cli\u003e1300–3000mAh 3S 11.1V LiPo flight battery (not included)\u003c\/li\u003e\n  \u003cli\u003e3S compatible LiPo charger (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-Flite","offers":[{"title":"Default Title","offer_id":43962312917229,"sku":"EFL49500","price":497.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL4950.jpg?v=1756168523"},{"product_id":"e-flite-efl18350-t-28-trojan-1-2m-bnf-basic-w-smart","title":"E-Flite T-28 Trojan 1.2m BNF Basic with Smart RC Warbird - EFL18350","description":"\u003cp\u003eThe E-flite T-28 Trojan 1.2m BNF Basic (EFL18350) is a 1.2-metre electric RC warbird based on the iconic US Navy trainer aircraft, designed for intermediate to experienced pilots looking for their first full-house scale model. Finished in a striking red and white scheme with updated nose art, this Bind-N-Fly Basic RC plane arrives factory-built and pre-installed with a brushless outrunner motor, a Spektrum Avian 70A Smart Lite ESC, and a Spektrum AR631 6-channel receiver — so you're close to ready to fly straight out of the box. The AR631 receiver includes both AS3X gyro stabilisation technology and optional SAFE Select flight envelope protection, making this warbird genuinely approachable for pilots stepping up from a trainer while still offering enough performance for experienced hands to push harder with a 4S LiPo.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e48.2-inch (1,224mm) wingspan on a lightweight composite-reinforced EPO airframe weighing 3.2 lb without battery\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 70A Smart Lite ESC supports 3S and 4S LiPo batteries without modification — 3S delivers scale and sport flying, 4S unlocks higher speed and aerobatic performance\u003c\/li\u003e\n  \u003cli\u003eSmart ESC provides real-time telemetry including motor RPM, current draw, and battery voltage to compatible Spektrum AirWare transmitters\u003c\/li\u003e\n  \u003cli\u003eAS3X technology delivers locked-in stability in flight; SAFE Select is available as an optional mode for pilots who want an extra safety net\u003c\/li\u003e\n  \u003cli\u003eFull-house setup includes functional electric retracts with scale strut covers and doors, operational flaps for shorter takeoffs and landings, and a steerable nosewheel for easier ground handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite T-28 Trojan 1.2m airframe (factory-assembled)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 70A Brushless Smart Lite ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eBrushless outrunner motor (installed)\u003c\/li\u003e\n  \u003cli\u003e7 servos with linkages (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver with AS3X and SAFE Select (installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 6 to 7+ channel Spektrum DSMX\/DSM2 compatible transmitter\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V or 4S 14.8V 2200–3200mAh LiPo battery with EC3 or IC3 connector\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-Flite","offers":[{"title":"Default Title","offer_id":44019155075309,"sku":"EFL18350","price":1001.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL18350action.jpg?v=1762886064"},{"product_id":"junkers-cl1-g-buyu-15cc","title":"Seagull Models Junkers CL1 G-BUYU 15cc RC Aircraft Kit - SEA275","description":"\u003cp\u003eThe Seagull Models Junkers CL1 G-BUYU is a 15cc balsa and ply RC aircraft kit built for intermediate to advanced pilots who want a characterful WWI biplane in the air. This RC plane recreates the classic German Junkers CL1 with a 68.9 inch (175 cm) wingspan and an approximate flying weight of 8.8 lbs (4 kg), giving it a stable, scale-like presence in the air. The SEA275 is designed for a 10-15cc petrol engine but also includes the parts for an electric conversion, so you can power it whichever way suits your setup. With its large wing area and steady flight characteristics, this balsa RC aircraft rewards smooth inputs and makes a satisfying step up for pilots moving on from sport trainers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWingspan of 68.9 inches (175 cm) with a wing area of 776.6 sq.in (50.1 sq.dm)\u003c\/li\u003e\n  \u003cli\u003eApproximate flying weight of 8.8 lbs (4 kg) and length of 48.3 inches (122.6 cm)\u003c\/li\u003e\n  \u003cli\u003eDesigned for a 10-15cc engine, with an electric conversion option included\u003c\/li\u003e\n  \u003cli\u003eScale WWI Junkers CL1 styling in a balsa and ply airframe\u003c\/li\u003e\n  \u003cli\u003eIntermediate to advanced flight profile suited to experienced pilots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built balsa and ply Junkers CL1 airframe\u003c\/li\u003e\n  \u003cli\u003eElectric conversion components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-15cc engine with starting equipment\u003c\/li\u003e\n  \u003cli\u003eRadio system with at least 4 channels\u003c\/li\u003e\n  \u003cli\u003e5 servos\u003c\/li\u003e\n  \u003cli\u003eFuel\u003c\/li\u003e\n  \u003cli\u003eBuilding and assembly tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605137289453,"sku":"SEA275","price":675.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA275.jpg?v=1762889464"},{"product_id":"glasair-sportsman-g-2-2-landing-gear-by-seagull-models","title":"Seagull Models Glasair Sportsman G 2+2 Landing Gear RC Plane Kit - SEA158","description":"\u003cp\u003eThe Seagull Models SEA158 Glasair Sportsman G 2+2 is an ARF (Almost Ready to Fly) semi-scale RC plane kit based on the popular homebuilt Glasair Sportsman 2+2 aircraft, suited to pilots with intermediate to advanced flying experience. With a wingspan of 70.9 inches (180cm) and a flying weight of 9.5 to 11.5 lbs, this is a substantial fixed-wing model that delivers realistic general aviation flight characteristics. The airframe is built from quality balsa and plywood, keeping the structure both strong and light — a step up from the typical ARF construction you'll find at this price point. Covered in genuine UltraCote film in a ready-finished colour scheme, the Glasair Sportsman arrives looking the part straight out of the box, with a painted fibreglass cowling and wheel pants that match the covering without any additional finishing required.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e70.9-inch (180cm) wingspan with a wing area of 644.8 sq in, giving the model stable, scale-like flight behaviour\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps fitted with scale pocket hinges improve both realism and flight performance during approach and landing\u003c\/li\u003e\n  \u003cli\u003eBalsa and plywood airframe construction offers a stronger and lighter build than many comparable ARF models\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowling and wheel pants are pre-finished and colour-matched to the UltraCote covering — no painting needed\u003c\/li\u003e\n  \u003cli\u003eTwo pilot figures included for added cockpit realism; an optional float set is available separately for water operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeagull Models SEA158 Glasair Sportsman 2+2 ARF airframe\u003c\/li\u003e\n  \u003cli\u003ePre-covered wings, fuselage, and tail surfaces in UltraCote film\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowling and wheel pants\u003c\/li\u003e\n  \u003cli\u003eScale pocket hinges and fibreglass control horns\u003c\/li\u003e\n  \u003cli\u003eTwo pilot figures\u003c\/li\u003e\n  \u003cli\u003eLanding gear (as specified in this variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGlow engine: 0.75–0.91 cu in 2-stroke or 0.91–1.10 cu in 4-stroke (electric conversion is also possible as an optional alternative)\u003c\/li\u003e\n  \u003cli\u003e6-channel RC radio system with 8 servos\u003c\/li\u003e\n  \u003cli\u003eFuel and associated plumbing if running a glow engine\u003c\/li\u003e\n  \u003cli\u003eBattery pack and speed controller if opting for electric conversion\u003c\/li\u003e\n  \u003cli\u003eField equipment: glow starter, fuel pump, or equivalent for your chosen power system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605138469101,"sku":"SEA158","price":798.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA158.jpg?v=1762719626"},{"product_id":"skyraider-warbird-10cc-matte-finished-bee-version-span-160cm-engine-10-15cc","title":"Seagull Models Skyraider Matte Bee Version 160cm 10-15cc RC Warbird - SEA230B","description":"\u003cp\u003eThe Seagull Models SEA230B Skyraider is a giant scale RC warbird based on the Douglas AD Skyraider, built for experienced pilots running 10cc to 15cc nitro engines. Spanning 160cm (63 inches) and finished in a matte scheme with pre-applied decals, this is a ready-to-cover-and-fly scale model that rewards builders who want serious presence on the flight line. The Bee version comes with mechanical retracts and an electric conversion option, making it one of the more versatile WWII-themed RC planes in the giant scale category.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e160cm wingspan with a wing area of 637.1 sq.in (41.1 sq.dm) and an all-up weight of approximately 3.9kg, giving a stable platform for a 10–15cc engine\u003c\/li\u003e\n  \u003cli\u003eCovered in genuine Oracover premium film with factory-applied decals — no covering work required out of the box\u003c\/li\u003e\n  \u003cli\u003eMechanical retracts included as standard, with an optional electric power conversion set also included for pilots who prefer brushless setups\u003c\/li\u003e\n  \u003cli\u003eOperational flaps, fully sheeted airfoil tail surfaces, and two-piece plug-in wings for a realistic flight envelope and straightforward transport\u003c\/li\u003e\n  \u003cli\u003eDetailed scale cockpit with lightweight pilot figure, fibreglass engine cowl with dummy engine insert, wing guns, drop tanks, and removable antenna for accurate WWII scale presentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeagull Models SEA230B Skyraider airframe (pre-covered, decals applied)\u003c\/li\u003e\n  \u003cli\u003eMechanical retract system\u003c\/li\u003e\n  \u003cli\u003eElectric power conversion set\u003c\/li\u003e\n  \u003cli\u003eFibreglass engine cowl with dummy engine insert\u003c\/li\u003e\n  \u003cli\u003eDetailed scale cockpit with pilot figure\u003c\/li\u003e\n  \u003cli\u003eWing guns, drop tanks, and removable antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10cc to 15cc nitro engine (or brushless electric motor if using the included conversion set)\u003c\/li\u003e\n  \u003cli\u003eMinimum 6-channel radio system with 7 servos\u003c\/li\u003e\n  \u003cli\u003eFuel system and fuel (for nitro setup)\u003c\/li\u003e\n  \u003cli\u003eAppropriate battery and ESC (for electric conversion setup)\u003c\/li\u003e\n  \u003cli\u003ePropeller suited to your chosen power plant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605141090541,"sku":"SEA230B","price":826.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA230B.jpg?v=1762889468"},{"product_id":"funky-cub-10-15cc-sea254-float-set-optional-red-sliver-span-180cm-engine-10-15cc","title":"Seagull Models Funky Cub 10-15cc Red\/Silver 180cm Span RC Plane - SEA254R","description":"\u003cp\u003eThe Seagull Models Funky Cub SEA254R is a large-scale balsa and plywood RC plane kit designed for 10-15cc petrol or glow engines, with an optional float set for water operations. Spanning 180cm (70.9 in), this is a seriously capable trainer-style aircraft that covers everything from steady, predictable circuits through to genuine aerobatics. The red and silver Oracover finish is hand-applied at the factory, so the airframe arrives looking sharp straight out of the box. With its low minimum airspeed and forgiving flight envelope, the Funky Cub suits pilots stepping up from smaller trainers as well as more experienced fliers who want a relaxed, versatile aircraft they can push when the mood takes them.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e180cm wingspan and 128cm fuselage length give the Funky Cub a commanding presence in the air and stable, easy-to-read orientation at distance\u003c\/li\u003e\n  \u003cli\u003eLightweight balsa and plywood airframe keeps the flying weight down to approximately 3.7kg, which contributes directly to the low stall speed and docile handling\u003c\/li\u003e\n  \u003cli\u003eAccepts 10-15cc petrol or glow engines as standard, with an electric power conversion also possible for those who prefer brushless setups\u003c\/li\u003e\n  \u003cli\u003eTwo-part wing design simplifies transport and storage, and the large top hatch gives straightforward access to the fuel tank and electronics\u003c\/li\u003e\n  \u003cli\u003eCompatible with an optional float set (SEA254), making it possible to operate from calm water as well as grass or paved strips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-built and covered Funky Cub airframe in red and silver Oracover\u003c\/li\u003e\n  \u003cli\u003eFuel-proof painted fibreglass cowl and wheel pants\u003c\/li\u003e\n  \u003cli\u003eDurable main landing gear\u003c\/li\u003e\n  \u003cli\u003eFactory-painted wing struts\u003c\/li\u003e\n  \u003cli\u003eDetachable windscreen\u003c\/li\u003e\n  \u003cli\u003eAll specified hardware and accessories for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-15cc petrol or glow engine (or suitable brushless electric power system if converting)\u003c\/li\u003e\n  \u003cli\u003e5-channel radio system with 9 servos\u003c\/li\u003e\n  \u003cli\u003eFuel or appropriate battery pack depending on power system chosen\u003c\/li\u003e\n  \u003cli\u003eCompatible RC transmitter and receiver\u003c\/li\u003e\n  \u003cli\u003eOptional: Seagull Models float set (sold separately) for water operations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605141549293,"sku":"SEA254R","price":701.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA254R.jpg?v=1762889471"},{"product_id":"funky-cub-yellow-10-15cc-span-180cm-engine-10-15cc-float-set-optional","title":"Seagull Models Funky Cub Yellow 10-15cc 180cm Span RC Plane Kit - SEA254Y","description":"\u003cp\u003eThe Seagull Models Funky Cub (SEA254Y) is a 180cm wingspan high-wing trainer ARF kit suited to both beginner and experienced RC pilots. Finished in yellow, this balsa and plywood sports trainer combines easy, stable flying with enough aerobatic capability to keep more confident flyers engaged. It's a relaxed, everyday model for the RC field, with operating flaps that widen the flight envelope and make slow approaches and landings easier to manage.\u003c\/p\u003e\n\u003cp\u003eThis Funky Cub RC plane arrives as an Almost-Ready-to-Fly kit, so the airframe is built and covered in genuine hand-applied Oracover, with major assembly work already done for you. It accepts nitro engines from .61 to .75 (or four-stroke .82 to .91), gasoline 10-15cc, or an electric power system, giving you a flexible RC aircraft that can be set up to suit your preferred power. An optional float set is available if you want to fly off calm water.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e180cm (70.9in) wingspan with a 51.2 sq.dm wing area and 3.7kg flying weight\u003c\/li\u003e\n  \u003cli\u003eLightweight yet strong balsa and plywood construction with hand-applied Oracover covering\u003c\/li\u003e\n  \u003cli\u003eOperating flaps for a wider flight envelope and slower, more controlled landings\u003c\/li\u003e\n  \u003cli\u003eGlow, gas, or electric power compatible with included EP conversion option\u003c\/li\u003e\n  \u003cli\u003ePre-fitted motor mount, pre-installed and pinned hinges, and pushrods cut to correct lengths\u003c\/li\u003e\n  \u003cli\u003eTwo-part wing for easier transport, plus a large top hatch and detachable windscreen for access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built and covered Funky Cub airframe in yellow\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowl and wheel pants\u003c\/li\u003e\n  \u003cli\u003eFactory-painted wing struts\u003c\/li\u003e\n  \u003cli\u003eLanding gear\u003c\/li\u003e\n  \u003cli\u003eAll required hardware and accessories\u003c\/li\u003e\n  \u003cli\u003eElectric conversion components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine: nitro 2-stroke .61-.75, 4-stroke .82-.91, or gasoline 10-15cc, or a suitable electric power system\u003c\/li\u003e\n  \u003cli\u003e5-channel radio system\u003c\/li\u003e\n  \u003cli\u003e9 servos\u003c\/li\u003e\n  \u003cli\u003eReceiver and flight battery\u003c\/li\u003e\n  \u003cli\u003eFor nitro or gas: fuel and appropriate field gear\u003c\/li\u003e\n  \u003cli\u003eOptional float set for water flying\u003c\/li\u003e\n  \u003cli\u003eBuilding adhesives and basic field tools for final assembly (approximately 10 to 15 hours)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605141745901,"sku":"SEA254Y","price":701.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA254Y.jpg?v=1762889474"},{"product_id":"dhc-2-turbine-beaver-30cc-floats-optional","title":"Seagull Models DHC-2 Turbine Beaver 30cc RC Aircraft Kit - SEA268","description":"\u003cp\u003eThe Seagull Models DHC-2 Turbine Beaver is a large-scale balsa RC aircraft kit built for the 20-30cc engine class and aimed at intermediate to advanced pilots. With an 80-inch wingspan and a scale outline of the classic Canadian bush plane, this Beaver RC plane (SEA268) recreates the workhorse floatplane look and handles with the steady, predictable manners that suit big sport-scale flying. It arrives as a covered balsa and balsa-plywood kit that needs final assembly and your own power and radio gear, so it suits builders who want a substantial project rather than a ready-to-fly model. With an approximate flying weight of 11.5 lbs and functional flaps, this radio control aircraft offers slow, scale-realistic flight, and it's ready to accept optional scale floats for water flying.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e80-inch (203.2 cm) wingspan with a 56.5-inch (143.5 cm) length and 727 sq.in wing area\u003c\/li\u003e\n  \u003cli\u003eLightweight balsa and balsa-plywood construction finished in genuine Oracover film\u003c\/li\u003e\n  \u003cli\u003eTwo-piece plug-in wings and stabilisers with aluminium tube joiners for easier transport and field assembly\u003c\/li\u003e\n  \u003cli\u003eFunctional scale cockpit doors with spring-loaded latches, instrument panel, and removable seat details\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps and quick connect\/disconnect painted aluminium wing struts\u003c\/li\u003e\n  \u003cli\u003eDesigned for gasoline, glow, or electric power with an adjustable EP motor box included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-covered balsa and balsa-plywood airframe\u003c\/li\u003e\n  \u003cli\u003eElectric conversion motor box\u003c\/li\u003e\n  \u003cli\u003eScale cockpit detail including instrument panel and removable seats\u003c\/li\u003e\n  \u003cli\u003ePainted aluminium airfoil wing struts\u003c\/li\u003e\n  \u003cli\u003eAluminium tube wing and stabiliser joiners\u003c\/li\u003e\n  \u003cli\u003eAll necessary assembly hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e20-30cc gasoline engine, or a suitable glow or electric power system\u003c\/li\u003e\n  \u003cli\u003e6-channel radio system with 7 servos\u003c\/li\u003e\n  \u003cli\u003eReceiver and flight battery pack\u003c\/li\u003e\n  \u003cli\u003eFor electric setups, a compatible ESC, motor, and battery\u003c\/li\u003e\n  \u003cli\u003eField equipment for the chosen power system such as fuel or chargers\u003c\/li\u003e\n  \u003cli\u003eOptional scale floats for water operation (sold separately)\u003c\/li\u003e\n  \u003cli\u003eBasic build tools and adhesives\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605142892781,"sku":"SEA268","price":887.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA268.jpg?v=1762719640"},{"product_id":"messerschmitt-bf-109e-20cc","title":"Seagull Models Messerschmitt Bf 109E 20cc RC Warbird - SEA278","description":"\u003cp\u003eThe Seagull Models Messerschmitt Bf 109E (SEA278) is a large-scale RC warbird that recreates the iconic WWII German fighter for intermediate and advanced pilots. This balsa and ply ARF model has a 64 inch (162.5 cm) wingspan and a flying weight of around 11 lbs (5.5 kg), making it a substantial gas-powered RC plane designed for a 15 to 20cc gasoline engine. An electric conversion option is included, so the Bf 109E can be flown on either gas or electric power. With its detailed warbird scale lines and proven Seagull Models airframe, this RC aircraft suits experienced flyers who want a commanding WWII fighter on the flightline.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e64.0 inch (162.5 cm) wingspan with a wing area of 765.7 sq in (49.4 sq dm)\u003c\/li\u003e\n  \u003cli\u003eFuselage length of 59.8 in (152 cm) and approximate flying weight of 11.0 lbs (5.5 kg)\u003c\/li\u003e\n  \u003cli\u003eDesigned for a 15 to 20cc gasoline engine, with an electric conversion included for motor power\u003c\/li\u003e\n  \u003cli\u003eRequires a 7 channel radio system running 9 servos\u003c\/li\u003e\n  \u003cli\u003eIntermediate to advanced skill level warbird with scale Luftwaffe styling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built Messerschmitt Bf 109E airframe (ARF)\u003c\/li\u003e\n  \u003cli\u003eElectric conversion components\u003c\/li\u003e\n  \u003cli\u003eAssembly hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eA 15 to 20cc gasoline engine or a suitable electric power system\u003c\/li\u003e\n  \u003cli\u003e7 channel radio system\u003c\/li\u003e\n  \u003cli\u003e9 servos\u003c\/li\u003e\n  \u003cli\u003eReceiver battery and flight battery as required by your chosen power setup\u003c\/li\u003e\n  \u003cli\u003eFuel and field equipment if running the gas engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605144498413,"sku":"SEA278","price":1104.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA278.jpg?v=1762889476"},{"product_id":"rans-s-20-raven-80-inches-20cc","title":"Seagull Models RANS S 20 Raven 80in 20cc RC Plane - SEA279","description":"\u003cp\u003eThe Seagull Models RANS S-20 Raven (SEA279) is an 80-inch wingspan high-wing RC plane aimed at intermediate to advanced pilots. This is an ARF balsa and balsa-plywood kit that builds into a scale model of the popular RANS S-20 Raven light sport aircraft, with the option to run a 20cc petrol engine or an electric setup using the included conversion. With a generous wing area of 1069.5 square inches and an approximate flying weight of 12.6 lbs, this radio control aircraft offers stable, predictable handling that suits pilots ready to move beyond trainers while still enjoying scale flying. The model spans 80 inches (203.2 cm) and measures 53.4 inches (135.6 cm) in length.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt from genuine balsa and balsa-plywood for a light, strong airframe finished in Oracover film\u003c\/li\u003e\n  \u003cli\u003eTwo-piece plug-in wing with functional flaps and quick-connect streamlined wing struts for easy transport and assembly\u003c\/li\u003e\n  \u003cli\u003eFactory-painted fibreglass cowl, detailed cockpit with pilot figure, instrument details and seats\u003c\/li\u003e\n  \u003cli\u003eOperational cockpit side-doors and a pre-cut scale decal sheet for added realism\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept either a 20cc gas engine or the included electric power conversion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built balsa and balsa-plywood airframe covered in Oracover film\u003c\/li\u003e\n  \u003cli\u003eFactory-painted fibreglass engine cowl\u003c\/li\u003e\n  \u003cli\u003eDetailed cockpit with pilot figure, seats and instrument details\u003c\/li\u003e\n  \u003cli\u003eElectric power conversion kit\u003c\/li\u003e\n  \u003cli\u003eWing struts and functional flap hardware\u003c\/li\u003e\n  \u003cli\u003ePre-cut scale decal sheet\u003c\/li\u003e\n  \u003cli\u003eNecessary hardware and accessories for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eA 6-channel radio system with 8 servos\u003c\/li\u003e\n  \u003cli\u003eEither a 20cc petrol engine or a suitable electric motor, ESC and battery if using the electric conversion\u003c\/li\u003e\n  \u003cli\u003eReceiver and compatible battery for the radio system\u003c\/li\u003e\n  \u003cli\u003eGlue and basic build tools to complete assembly\u003c\/li\u003e\n  \u003cli\u003ePropeller and spinner appropriate to your chosen power system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605145022701,"sku":"SEA279","price":854.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA279.jpg?v=1756943434"},{"product_id":"cessna-188-agwagon-97-33-38cc","title":"Seagull Models Cessna 188 AGwagon 97in 33-38cc RC Aircraft Kit - SEA299","description":"\u003cp\u003eThe Seagull Models SEA299 Cessna 188 AGwagon is a large-scale balsa and plywood RC aircraft kit designed for intermediate to advanced pilots, powered by a 33–38cc petrol engine. Based on the iconic agricultural aircraft, this impressive model spans 97.2 inches (246.8 cm) and captures the working character of the full-scale AGwagon with accurate scale detailing throughout. The factory-applied Oracover covering, pre-painted fibreglass cowl, and detailed cockpit put it well above a bare-bones kit, meaning significantly less finishing work before your first flight. An electric conversion option is also included, giving you flexibility in how you choose to power the model.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e97.2-inch wingspan with a wing area of 1,110.4 sq.in and an approximate flying weight of 16.8 lbs, suited to open-field flying\u003c\/li\u003e\n  \u003cli\u003eWorking drop-hinge flaps improve realism and help reduce landing speed\u003c\/li\u003e\n  \u003cli\u003eTwo-piece plug-in wing design simplifies transport and field assembly\u003c\/li\u003e\n  \u003cli\u003eScale details include wing struts and spray bar, reflecting the agricultural aviation theme of the Cessna 188\u003c\/li\u003e\n  \u003cli\u003eAluminium landing gear and airfoiled tail surfaces are included as part of the airframe construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBalsa and plywood airframe (factory-covered in Oracover)\u003c\/li\u003e\n  \u003cli\u003ePre-painted fibreglass cowl\u003c\/li\u003e\n  \u003cli\u003eAluminium landing gear\u003c\/li\u003e\n  \u003cli\u003eElectric conversion components\u003c\/li\u003e\n  \u003cli\u003eScale detailing parts including wing struts and spray bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e33–38cc petrol engine (or compatible electric power system if using the included electric conversion)\u003c\/li\u003e\n  \u003cli\u003e6-channel RC radio system\u003c\/li\u003e\n  \u003cli\u003e8 servos\u003c\/li\u003e\n  \u003cli\u003eFuel and associated plumbing (if running petrol)\u003c\/li\u003e\n  \u003cli\u003eAppropriate propeller for chosen engine\u003c\/li\u003e\n  \u003cli\u003eBattery and charger for receiver and servos\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605146071277,"sku":"SEA299","price":1282.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA299.jpg?v=1762889479"},{"product_id":"reno-yak-11-pylon-racer-67-5-30cc","title":"Seagull Models Reno YAK 11 Pylon Racer 67.5in 30cc RC Plane - SEA302","description":"\u003cp\u003eThe Seagull Models SEA302 Reno YAK-11 is a giant scale RC plane modelled on the Perestroika Czech Mate pylon racer from the Reno Air Races, built for experienced pilots flying 30cc gasoline power. This balsa and plywood ARF aircraft spans 70.9 inches and is finished in the bold Czech Mate trim scheme, giving you a scale-outline warbird racer with full aerobatic capability. With its airfoiled tail surfaces and clean racing lines, this 30cc RC aircraft is aimed at flyers who already have experience with large nitro or gas models and want a fast, agile platform for sport and aerobatic flying.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBalsa and balsa plywood airframe for a strong, lightweight build at 11.9 lbs flying weight\u003c\/li\u003e\n  \u003cli\u003eFactory-applied Oracover covering in the accurate YAK-11 Czech Mate colour scheme\u003c\/li\u003e\n  \u003cli\u003ePlug-in wing design for quick assembly and easy transport to the flying field\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowl, detailed cockpit and hand-painted pilot figure for scale realism\u003c\/li\u003e\n  \u003cli\u003eAirfoiled tail surfaces and full aerobatic flight capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-covered balsa and plywood airframe\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowl\u003c\/li\u003e\n  \u003cli\u003eDetailed cockpit with hand-painted pilot\u003c\/li\u003e\n  \u003cli\u003eComplete hardware package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eA 20cc to 26cc gasoline engine to suit the recommended power range\u003c\/li\u003e\n  \u003cli\u003e7-channel radio system with receiver\u003c\/li\u003e\n  \u003cli\u003e9 servos to complete the control setup\u003c\/li\u003e\n  \u003cli\u003eReceiver battery and switch\u003c\/li\u003e\n  \u003cli\u003ePropeller, spinner and fuel suitable for your chosen engine\u003c\/li\u003e\n  \u003cli\u003eBuilding tools, adhesives and field equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605146595565,"sku":"SEA302","price":887.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA302.jpg?v=1762889482"},{"product_id":"l-4-grasshopper-span-90-1-5-scale-15-20cc-by-seagull-models","title":"Seagull Models L-4 Grasshopper 90in Span (15-20cc) RC Aircraft Kit 1\/5 Scale - SEA325","description":"\u003cp\u003eThe Seagull Models L-4 Grasshopper (SEA325) is a 1\/5 scale ARF RC plane with a 90-inch wingspan, modelling the WWII military observation version of the Piper J-3 Cub. With its gentle, stable flight characteristics, it suits experienced beginners moving on from a basic trainer right through to seasoned scale flyers who want an easy everyday warbird. The Grasshopper is built from balsa and plywood for a light but durable airframe, and arrives almost ready to fly with most of the build work already done at the factory. It is also an IMAA legal warbird, so you can fly it with confidence at scale and warbird meets. Powered by a 20cc-class glow or petrol engine, this RC aircraft is a relaxed, scale-detailed flyer that's quick to assemble and forgiving in the air.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e90-inch (228.6 cm) wingspan with a flying weight of around 13.2 lbs (6.0 kg) and a length of 56.8 in (144.2 cm)\u003c\/li\u003e\n  \u003cli\u003eBalsa and plywood construction with airfoiled tail surfaces for light, durable flight\u003c\/li\u003e\n  \u003cli\u003ePlug-in wings for fast assembly, easy disassembly and transport to the field\u003c\/li\u003e\n  \u003cli\u003eGradated camouflage scheme applied in matte Oracover film covering\u003c\/li\u003e\n  \u003cli\u003eMotor mount set up for either glow or electric power, with detailed cockpit and painted pilot figure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-covered balsa and plywood ARF airframe with pre-installed hinges\u003c\/li\u003e\n  \u003cli\u003ePlug-in wings\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowl\u003c\/li\u003e\n  \u003cli\u003eDetailed cockpit with painted pilot figure\u003c\/li\u003e\n  \u003cli\u003eLanding gear\u003c\/li\u003e\n  \u003cli\u003eHardware for glow or electric power installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e20cc-class petrol or equivalent glow\/electric power system\u003c\/li\u003e\n  \u003cli\u003e4-channel radio system with 5 servos\u003c\/li\u003e\n  \u003cli\u003eReceiver and flight battery\u003c\/li\u003e\n  \u003cli\u003ePropeller, fuel and field equipment as required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605146857709,"sku":"SEA325","price":1070.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA325.jpg?v=1756943444"},{"product_id":"carbon-cub-15cc-arf","title":"Hangar 9 Carbon Cub 15cc ARF RC Aircraft Kit 1\/5 Scale - HAN5065","description":"\u003cp\u003eThe Hangar 9 Carbon Cub 15cc ARF (HAN5065) is a 1\/5 scale giant scale RC plane built for experienced fixed-wing pilots who want classic Cub character with serious performance. Spanning 90 inches (228 cm) and based on the Cub Crafters Carbon Cub, this almost-ready-to-fly model captures the look and flying qualities of the full-size aircraft in an all-wood, laser-cut airframe finished in authentic Cub Yellow, Black, and Silver UltraCote film. With a flying weight of around 11.4 lb and a light wing loading of 22.4 oz\/sq in, it's capable of impressive short takeoffs and landings — and with functional flaps, shock-absorbing main gear, and tundra-style wheels, it handles grass strips well. The two-piece plug-in wing and quick-connect struts make transporting and assembling this large RC aircraft straightforward at the field.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e90-inch wingspan with laser-cut all-wood construction and a fiberglass cowl finished in matching paint\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps and shock-absorbing main landing gear with tundra-style wheels for short-field and grass strip performance\u003c\/li\u003e\n  \u003cli\u003eOperational cockpit side-doors, interior detailing, instrument panel, and LED landing lights installed\u003c\/li\u003e\n  \u003cli\u003eFloat-ready airframe with hard points for the optional 1\/5-scale float set, allowing water operations\u003c\/li\u003e\n  \u003cli\u003eCompatible with a 15cc 2-stroke gas engine or electric equivalent (Power 60, 470Kv motor with a 5000mAh 6S LiPo), giving pilots flexibility over their power system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHangar 9 Carbon Cub 15cc ARF airframe (HAN5065)\u003c\/li\u003e\n  \u003cli\u003eAll-wood laser-cut structure with UltraCote film covering applied\u003c\/li\u003e\n  \u003cli\u003eFiberglass cowl pre-painted to match trim scheme\u003c\/li\u003e\n  \u003cli\u003eFunctional LED landing lights (installed)\u003c\/li\u003e\n  \u003cli\u003eComplete hardware package including fiberglass control horns\u003c\/li\u003e\n  \u003cli\u003ePre-cut hinge locations on all control surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e15cc 2-stroke gas\/petrol engine (or Power 60 470Kv brushless motor for electric conversion)\u003c\/li\u003e\n  \u003cli\u003e6+ channel full-range transmitter and receiver\u003c\/li\u003e\n  \u003cli\u003e7 standard digital servos\u003c\/li\u003e\n  \u003cli\u003eReceiver battery and engine ignition battery (2 batteries required)\u003c\/li\u003e\n  \u003cli\u003e14 to 16 inch 2-blade propeller (or appropriate electric prop)\u003c\/li\u003e\n  \u003cli\u003e2-3\/4 inch (70mm) spinner\u003c\/li\u003e\n  \u003cli\u003eIf running electric: 5000mAh 6S 22.2V LiPo battery pack and HV 80A minimum speed controller\u003c\/li\u003e\n  \u003cli\u003eFuel and associated plumbing if running gas\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hangar 9","offers":[{"title":"Default Title","offer_id":44605162684653,"sku":"HAN5065","price":1282.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/HAN5065profile.jpg?v=1752038222"},{"product_id":"e-flite-01650-conscendo-evolution-1-5m-bnf-basic-with-safe-select","title":"E-flite Conscendo Evolution 1.5m BNF Basic with SAFE Select RC Glider - EFL01650","description":"\u003cp\u003eThe E-flite Conscendo Evolution 1.5m (EFL01650) is a powered sailplane offered in BNF Basic format, suited to pilots ranging from first-time glider flyers through to intermediate and experienced flyers looking for aerobatic capability and soaring performance. With a 1.5m wingspan and a higher-density EPO airframe that is stiffer and more durable than earlier Conscendo models, the Evolution is built to handle both relaxed soaring sessions and higher-energy sport flying. The BNF Basic format means the model arrives with motor, ESC, servos, and a Spektrum AR637TA receiver already installed — you supply a compatible Spektrum DSMX or DSM2 transmitter, a LiPo battery, and a charger to get airborne. SAFE Select flight envelope protection is included and optional to activate, making this RC glider genuinely accessible to newer pilots without limiting what experienced flyers can do with it.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAS3X (Artificial Stabilisation 3-Axis) technology is built in, providing a stable, locked-in feel in variable air without interfering with normal control inputs.\u003c\/li\u003e\n  \u003cli\u003eSAFE Select is optional-use — activate it for self-levelling and bank-angle limiting when learning, or switch it off entirely for unrestricted flight.\u003c\/li\u003e\n  \u003cli\u003eThe power system is compatible with both 3S (11.1V) and 4S (14.8V) LiPo batteries, giving pilots the option of relaxed sport flying on 3S or increased speed and vertical performance on 4S.\u003c\/li\u003e\n  \u003cli\u003eThe 30A ESC is telemetry-capable, streaming real-time battery voltage, current draw, and motor RPM back to a compatible Spektrum transmitter during flight.\u003c\/li\u003e\n  \u003cli\u003eThe two-piece wing and stabilisers install and remove without glue, and the model can be flight-ready in less time than it takes to charge a battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Conscendo Evolution 1.5m airframe (EPO construction)\u003c\/li\u003e\n  \u003cli\u003e30A telemetry-capable brushless ESC (factory installed)\u003c\/li\u003e\n  \u003cli\u003eBrushless outrunner motor with folding propeller (factory installed)\u003c\/li\u003e\n  \u003cli\u003e4 servos with linkages (factory installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR637TA 6-channel receiver with AS3X and SAFE Select (factory installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 5 or more channel Spektrum DSMX or DSM2 compatible transmitter\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V 1300–2200mAh LiPo battery with EC3 or IC3 connector, or 4S 14.8V 1000–2200mAh LiPo battery with EC3 or IC3 connector\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44605326360813,"sku":"EFL01650","price":598.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL01650.jpg?v=1752039560"},{"product_id":"morane-saulnier-ai-103-60cc-1-3-scale-arf-by-seagull-models","title":"Seagull Models Morane-Saulnier AI 103in 60cc RC Plane 1\/3 Scale - SEA358","description":"\u003cp\u003eThe Seagull Models SEA358 Morane-Saulnier AI is a 103-inch wingspan, 1\/3 scale ARF RC plane reproducing the French WWI fighter in large-scale detail for experienced fixed-wing pilots. Designed around a 60cc petrol engine, this giant-scale warbird sits firmly in the advanced category — it's a serious build for pilots who have already logged time on large ARF aircraft and understand the demands of gas-powered flight. The Morane-Saulnier AI was a parasol-wing monoplane used during World War One, and Seagull Models has translated that distinctive silhouette into a large RC plane that will draw attention at any club flying day or scale event.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e103-inch wingspan places this firmly in giant-scale territory, suited to open flying sites with adequate space\u003c\/li\u003e\n  \u003cli\u003e1\/3 scale ARF construction means the airframe arrives largely pre-built, reducing bench time before first flight\u003c\/li\u003e\n  \u003cli\u003eDesigned for a 60cc petrol engine, giving the power and weight balance appropriate for a model of this size\u003c\/li\u003e\n  \u003cli\u003eWWI parasol-wing monoplane profile faithfully represents the Morane-Saulnier AI's distinctive overhead wing layout\u003c\/li\u003e\n  \u003cli\u003eARF format still requires engine, radio system, servos, and finishing before the model is flight-ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built ARF airframe (Morane-Saulnier AI, SEA358)\u003c\/li\u003e\n  \u003cli\u003eHardware pack (specific contents not confirmed — verify with supplied documentation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e60cc petrol engine (not included)\u003c\/li\u003e\n  \u003cli\u003eRadio transmitter and compatible receiver (not included)\u003c\/li\u003e\n  \u003cli\u003eServos appropriate for a giant-scale aircraft (quantity per manufacturer's manual — not included)\u003c\/li\u003e\n  \u003cli\u003eFuel system components including fuel tank and fuel line if not pre-installed (verify against kit contents)\u003c\/li\u003e\n  \u003cli\u003ePropeller suited to a 60cc engine (not included)\u003c\/li\u003e\n  \u003cli\u003eCompatible field equipment: fuel, starter, and safety equipment for petrol-powered aircraft\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605402808557,"sku":"SEA358","price":1819.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA358.jpg?v=1762719658"},{"product_id":"cessna-208b-grand-caravan-ex-85-30cc-yellow-black-arf-by-seagull-models","title":"Seagull Models Cessna 208B Grand Caravan EX 85in Yellow\/Black RC Aircraft Kit - SEA362","description":"\u003cp\u003eThe Seagull Models SEA362 Cessna 208B Grand Caravan EX is an 85-inch wingspan ARF RC plane designed for intermediate to advanced pilots looking for a large-scale civil aviation model. Finished in a striking yellow and black colour scheme with genuine Oracover film covering, this RC aircraft faithfully reproduces the outline and character of the Cessna 208B Grand Caravan utility aircraft. The airframe is built from lightweight balsa and balsa plywood construction and arrives largely pre-built, so you spend your time finishing and flying rather than building from scratch. It accepts gasoline, glow, or electric power systems, giving you flexibility over how you set it up.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e85-inch (2159mm) wingspan balsa and plywood airframe covered in genuine Oracover film for a scale finish\u003c\/li\u003e\n  \u003cli\u003eCompatible with 30cc to 40cc gasoline engines, glow engines, or electric power — adjustable motor box included for EP setups\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps, scale cockpit doors with magnetic latches, and cargo doors add genuine flight realism and ground presence\u003c\/li\u003e\n  \u003cli\u003eThree-piece plug-in wings with aluminium tube joiner and quick-connect struts make field assembly and transport straightforward\u003c\/li\u003e\n  \u003cli\u003eLED navigation light set and detailed instrument panel and seat interior included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built Cessna 208B Grand Caravan EX ARF airframe in yellow and black Oracover finish\u003c\/li\u003e\n  \u003cli\u003eAll necessary hardware for completion\u003c\/li\u003e\n  \u003cli\u003eAdjustable EP motor box\u003c\/li\u003e\n  \u003cli\u003eLED navigation light set\u003c\/li\u003e\n  \u003cli\u003ePainted wing struts\u003c\/li\u003e\n  \u003cli\u003eAluminium wing tube joiner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e30cc to 40cc gasoline engine (or equivalent glow or electric power system)\u003c\/li\u003e\n  \u003cli\u003ePropeller and spinner suited to your chosen engine\u003c\/li\u003e\n  \u003cli\u003eMinimum 8-channel radio system with 9 servos\u003c\/li\u003e\n  \u003cli\u003eAssociated electronics and wiring components\u003c\/li\u003e\n  \u003cli\u003eTools and miscellaneous building equipment to complete assembly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44605403005165,"sku":"SEA362","price":1399.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA362.jpg?v=1762719661"},{"product_id":"e-flite-01450-f-14-tomcat-twin-40mm-edf-bnf-basic","title":"E-flite F-14 Tomcat Twin 40mm EDF BNF Basic RC Aircraft - EFL01450","description":"\u003cp\u003eThe E-flite F-14 Tomcat Twin 40mm EDF BNF Basic (EFL01450) is a twin electric ducted fan RC jet aircraft modelled on the iconic US Navy F-14D Super Tomcat, aimed at intermediate to advanced RC pilots who want a capable and detailed EDF experience without the complexity of a scratch build. Finished in the VF-2 'Bounty Hunters' squadron livery from its 2002–2003 deployment, this RC jet arrives factory-assembled and nearly ready to fly — you just need to bind it to your existing Spektrum DSMX or DSM2 compatible transmitter. The twin 40mm fans and brushless outrunner motors are sized to run on readily available 4S 2200mAh 30C+ LiPo batteries, keeping running costs accessible. Functional 3-position variable-sweep wings and full-flying stabilators replicate the real aircraft's behaviour in flight, while Spektrum AS3X technology provides gyro-based stabilisation and optional SAFE Select offers flight envelope protection — both useful features when flying a higher-performance EDF aircraft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFunctional 3-position variable-sweep wings and full-flying stabilators for authentic F-14 flight character\u003c\/li\u003e\n  \u003cli\u003eFactory-installed Spektrum receiver with AS3X stabilisation and optional SAFE Select flight envelope protection\u003c\/li\u003e\n  \u003cli\u003eTwin 40mm EDF units with high-RPM brushless outrunner motors compatible with 4S 2200mAh 30C+ LiPo batteries\u003c\/li\u003e\n  \u003cli\u003eFixed tricycle landing gear with steerable nose wheel for smooth-surface take-off and landing; gear is removable for hand-launch grass operations\u003c\/li\u003e\n  \u003cli\u003eReal-time telemetry including battery voltage, current draw, and motor RPM available via compatible Spektrum AirWare transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite F-14 Tomcat Twin 40mm EDF airframe (factory assembled)\u003c\/li\u003e\n  \u003cli\u003e2 x brushless outrunner motors (installed)\u003c\/li\u003e\n  \u003cli\u003e2 x 40mm EDF units (installed)\u003c\/li\u003e\n  \u003cli\u003e3 x linear servos (installed)\u003c\/li\u003e\n  \u003cli\u003e1 x 3-position linear actuator for wing sweep (installed)\u003c\/li\u003e\n  \u003cli\u003e1 x Spektrum receiver with 2 x brushless ESCs (installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 6+ channel Spektrum DSMX or DSM2 compatible computer transmitter (not included)\u003c\/li\u003e\n  \u003cli\u003e1 x 4S 14.8V 2200mAh 30C+ LiPo battery with EC3 or IC3 connector (not included)\u003c\/li\u003e\n  \u003cli\u003e1 x compatible LiPo balance charger (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44605483679981,"sku":"EFL01450","price":638.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL01450.jpg?v=1762889607"},{"product_id":"e-flite-eflu15250-umx-pitts-s-1s-bnf-basic-w-as3x-and-safe-select","title":"E-Flite UMX Pitts S-1S BNF Basic with AS3X and SAFE Select RC Biplane - EFLU15250","description":"\u003cp\u003eThe E-flite UMX Pitts S-1S (EFLU15250) is an ultra-micro aerobatic RC biplane supplied as Bind-N-Fly Basic, making it ideal for pilots who already own a compatible Spektrum transmitter. Based on the iconic Aviat Aircraft Company Pitts S-1S design, this officially licensed scale replica arrives 100% factory-assembled with a brushless outrunner motor, ESC, Spektrum receiver, and four linear servos all pre-installed. With a wingspan of 17.09 inches (434 mm) and a flying weight of around 5 oz with a 3S battery, it sits comfortably in the ultra-micro class — small enough to fly indoors in a gymnasium or outdoors in a park or sports field. AS3X stabilisation technology smooths out turbulence and gives the RC biplane a locked-in feel, while the optional SAFE Select flight envelope protection makes it accessible to pilots at Skill Level 2 who are still building aerobatic confidence. The power system accepts either a 2S 7.4V or 3S 11.1V 280–300mAh LiPo with a JST-RCY connector, so you can tune performance to suit your flying style.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAS3X (Artificial Stabilization 3-aXis) technology counteracts wind and turbulence in real time for a smoother, more precise flight feel\u003c\/li\u003e\n  \u003cli\u003eOptional-use SAFE Select provides flight envelope protection that can be switched on or off to suit pilot experience\u003c\/li\u003e\n  \u003cli\u003e2S and 3S LiPo compatible brushless outrunner motor — use 2S 280mAh for moderate performance or 3S 300mAh for increased speed and unlimited vertical\u003c\/li\u003e\n  \u003cli\u003eReal-time battery voltage telemetry transmitted to compatible Spektrum AirWare-equipped radios during flight\u003c\/li\u003e\n  \u003cli\u003eEPS airframe construction keeps the aircraft lightweight and durable without requiring any assembly before flying\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite UMX Pitts S-1S airframe (fully factory-assembled)\u003c\/li\u003e\n  \u003cli\u003eBrushless outrunner motor (installed)\u003c\/li\u003e\n  \u003cli\u003eBrushless ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum DSMX\/DSM2 receiver (installed)\u003c\/li\u003e\n  \u003cli\u003e4x linear servos (installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5+ channel Spektrum DSMX\/DSM2 compatible transmitter (not included)\u003c\/li\u003e\n  \u003cli\u003e2S 7.4V or 3S 11.1V 280–300mAh LiPo battery with JST-RCY connector (not included)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo battery charger (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-Flite","offers":[{"title":"Default Title","offer_id":44605506912493,"sku":"EFLU15250","price":436.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFLU15250action.jpg?v=1752040669"},{"product_id":"e-flite-efl18550-f4u-4-corsair-1-2m-bnf-basic-w-as3x-and-safe-select","title":"E-Flite F4U-4 Corsair 1.2m BNF Basic with AS3X and SAFE Select RC Aircraft - EFL18550","description":"\u003cp\u003eThe E-flite EFL18550 F4U-4 Corsair 1.2m is a Bind-N-Fly Basic RC warbird recreating the iconic WWII US Navy fighter in an all-blue factory paint scheme, aimed at intermediate RC pilots ready to step into scale warbird flying. With a 1,220mm (48-inch) wingspan and composite-reinforced EPO construction, this RC plane strikes a strong balance between scale realism and sport performance. The BNF Basic format means the airframe, receiver, ESC, motor, and servos are all factory-installed — you just need a compatible Spektrum DSMX transmitter and a LiPo battery to get airborne. AS3X technology provides gyro-based stabilisation that smooths out turbulence and wind, while the optional SAFE Select mode offers flight envelope protection that helps less confident pilots avoid orientation errors. The power system accepts both 3S and 4S LiPo batteries, giving you a choice between relaxed scale flying on 3S or quicker, more aerobatic performance on 4S.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-installed Spektrum Avian 70A Smart Lite ESC supports 3S and 4S LiPo batteries and streams real-time telemetry data including RPM, current, and battery voltage to compatible Spektrum transmitters\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver includes built-in AS3X stabilisation and optional SAFE Select flight envelope protection, making this warbird more forgiving than a conventional fixed-wing RC plane\u003c\/li\u003e\n  \u003cli\u003eOperational electric rotating retracts with scale-like strut covers and functional flaps for shorter takeoff and landing rolls and improved slow-speed handling\u003c\/li\u003e\n  \u003cli\u003eFactory-applied all-blue paint finish with included decal sheets to add MARINES, NAVY, and other period-correct markings for personalisation\u003c\/li\u003e\n  \u003cli\u003eNo-glue final assembly with all six micro servos and linkages pre-installed; the airframe can be flight-ready in under an hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite F4U-4 Corsair 1.2m airframe (factory painted, all blue)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 70A Brushless Smart Lite ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eBrushless outrunner motor (installed)\u003c\/li\u003e\n  \u003cli\u003e6 x micro servos (installed)\u003c\/li\u003e\n  \u003cli\u003eDecal sheets (MARINES, NAVY, and other markings)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 6 to 7+ channel Spektrum DSMX or DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V or 4S 14.8V 2200–3200mAh LiPo battery with EC3 or IC3 connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-Flite","offers":[{"title":"Default Title","offer_id":44605511139565,"sku":"EFL18550","price":963.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL18550bottom.jpg?v=1752040706"},{"product_id":"e-flite-efl14850-commander-mpd-1-4m-bnf-basic-w-as3x-and-safe-select","title":"E-Flite Commander mPd 1.4m BNF Basic with AS3X \u0026amp; SAFE Select RC Aircraft - EFL14850","description":"\u003cp\u003eThe E-flite Commander mPd EFL14850 is a 1.4m wingspan sport plane designed as an ideal step up from a trainer, combining approachable flying characteristics with genuine performance capability. Co-designed by RC aircraft veterans David Payne and Mirco Pecorari, this BNF Basic RC plane arrives factory-finished in a striking blue and white trim scheme with the electronics pre-installed, so assembly takes less than an hour with no glue required. The 55.12-inch wingspan and composite-reinforced EPO airframe keep the model lightweight yet durable, while Spektrum AS3X technology delivers the locked-in stability that makes it feel planted and predictable in the air. SAFE Select adds an optional flight envelope protection mode, giving less experienced pilots a safety net they can switch off as their confidence grows.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpektrum Avian 45A Smart Lite ESC supports both 3S 11.1V and 4S 14.8V LiPo packs — 3S gives strong everyday performance while 4S unlocks more speed and unlimited vertical capability, with no modifications needed to switch between them.\u003c\/li\u003e\n  \u003cli\u003eThe installed Spektrum AR631 6-channel receiver provides real-time telemetry including battery voltage, current, and RPM when paired with a compatible Spektrum transmitter and Smart-capable setup.\u003c\/li\u003e\n  \u003cli\u003eSix metal-geared sub-micro servos with ball-link linkages deliver precise, consistent control response across all surfaces including functional flaps, which improve slow-speed handling and shorten takeoff and landing distances.\u003c\/li\u003e\n  \u003cli\u003eThe two-piece wing features hands-free connections for quick assembly and disassembly, making transport and storage straightforward without tools.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the Spektrum DXS transmitter bundled with many E-flite and HobbyZone trainer models, meaning pilots upgrading from a trainer may already own a suitable radio.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Commander mPd 1.4m airframe (factory-finished)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-Channel Receiver (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 45A Brushless Smart Lite ESC (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eBrushless Outrunner Motor (pre-installed)\u003c\/li\u003e\n  \u003cli\u003e6 x Metal-Geared Sub-Micro Servos (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eProduct Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 5 to 6+ channel Spektrum DSMX\/DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V or 4S 14.8V 2200–3200mAh LiPo battery with EC3 or IC3 connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-Flite","offers":[{"title":"Default Title","offer_id":44605512089837,"sku":"EFL14850","price":694.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/EFL14850rear.jpg?v=1752040711"},{"product_id":"hobby-zone-hbz6100-apprentice-stol-s-700mm-rtf-with-safe","title":"HobbyZone Apprentice STOL S 700mm RTF with SAFE RC Plane - HBZ6100","description":"\u003cp\u003eThe HobbyZone Apprentice STOL S 700mm (HBZ6100) is a ready-to-fly RC trainer plane designed specifically for beginner pilots who want a capable, forgiving aircraft they can fly in smaller spaces. Scaled down from the well-regarded Apprentice 1.5m, this ultra-micro RC plane features HobbyZone's SAFE technology, which actively assists new pilots by limiting bank angles, preventing over-correction, and offering a Panic Recovery mode at the push of a button. At 700mm wingspan and under 250 grams, it can be flown in large gardens, parks, and sports fields without requiring FAA registration, making it one of the most accessible beginner RC planes available.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSAFE technology provides Beginner, Intermediate, and Experienced flight modes switchable in flight, plus one-touch Panic Recovery to level the aircraft automatically.\u003c\/li\u003e\n  \u003cli\u003eSTOL (Short Take-Off and Landing) capability with steerable tailwheel and oversized tyres allows takeoffs and landings on grass and varied surfaces.\u003c\/li\u003e\n  \u003cli\u003eBrushless motor handles winds up to 5 mph and is capable of loops, rolls, and inverted flight as pilot skills develop.\u003c\/li\u003e\n  \u003cli\u003eDual-protocol Spektrum DSMX and SLT receiver makes the aircraft compatible with other SLT-equipped transmitters, including additional Bind-N-Fly ultra-micro models.\u003c\/li\u003e\n  \u003cli\u003eIncludes a trial version of the RealFlight Trainer Edition RC flight simulator, usable via USB-C connection from the included SLT6 transmitter to a PC for practice sessions at home.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHobbyZone Apprentice STOL S 700mm RTF aircraft (pre-installed ESC, receiver, and servos)\u003c\/li\u003e\n  \u003cli\u003eSpektrum SLT6 6-channel 2.4GHz transmitter with USB-C port\u003c\/li\u003e\n  \u003cli\u003e2S 300mAh LiPo flight battery\u003c\/li\u003e\n  \u003cli\u003eUSB-C charger\u003c\/li\u003e\n  \u003cli\u003eAA batteries for transmitter\u003c\/li\u003e\n  \u003cli\u003eRealFlight Trainer Edition trial version (software access)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWindows PC or laptop with compatible USB port to use the RealFlight simulator (USB-C cable not included)\u003c\/li\u003e\n  \u003cli\u003eAdditional flight batteries recommended for extended flying sessions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HobbyZone","offers":[{"title":"Default Title","offer_id":44605571727597,"sku":"HBZ6100","price":498.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/HBZ6100.jpg?v=1762889629"},{"product_id":"e-flite-efl011500-a-10-thunderbolt-ii-twin-64mm-edf-bnf-b-as3x-safe","title":"E-flite A-10 Thunderbolt II Twin 64mm EDF BNF-B AS3X\/SAFE RC Jet - EFL011500","description":"\u003cp\u003eThe E-flite A-10 Thunderbolt II Twin 64mm EDF BNF Basic (EFL011500) is a high-performance RC jet modelled on the iconic U.S. Air Force close air support aircraft, designed for intermediate to advanced fixed-wing pilots looking for a capable and well-equipped twin EDF model. Finished in a factory-applied three-tone 'Flipper' camouflage grey scheme, it arrives largely ready to bind and fly, with the electronics pre-installed and assembly time under an hour. The BNF Basic format means you'll need a compatible Spektrum DSMX transmitter to get airborne, but everything else is built in — including the Spektrum AR637TA receiver, Avian Dual 40A Smart ESC, brushless motors, nine digital servos, and electric retracts. AS3X technology provides the locked-in stability that makes this RC plane feel planted in the air, while the optional SAFE Select flight envelope protection gives pilots an added safety net when needed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwin 11-blade 64mm EDF fans paired with high-RPM brushless outrunner motors deliver strong vertical performance and level-flight top speeds reported at 110+ MPH\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian Dual 40A Smart ESC provides real-time telemetry including battery voltage via compatible receivers and transmitters, and supports optional thrust reversing with a 7+ channel transmitter\u003c\/li\u003e\n  \u003cli\u003eAS3X gyro stabilisation is active at all times; SAFE Select flight envelope protection is available as an optional-use mode requiring a 7+ channel Spektrum transmitter\u003c\/li\u003e\n  \u003cli\u003eFunctional scale features include LED navigation lights, operational flaps, twin rudders, electric retracts with shock-absorbing struts, removable ordnance, and a cockpit with pilot figure\u003c\/li\u003e\n  \u003cli\u003eMetal-geared nose wheel steering servo and shock-absorbing retract struts allow operation from paved surfaces, packed dirt, and manicured grass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite A-10 Thunderbolt II Twin 64mm EDF airframe (factory finished)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR637TA 6-channel DSMX receiver (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian Dual 40A Brushless Smart ESC (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eTwo brushless outrunner motors (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eNine digital servos including metal-geared nose wheel steering servo (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eElectric retracts with shock-absorbing struts (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 6-channel Spektrum DSMX\/DSM2 compatible transmitter (minimum for basic flight)\u003c\/li\u003e\n  \u003cli\u003eFull-range 7-channel Spektrum DSMX\/DSM2 compatible transmitter (required for SAFE Select functionality)\u003c\/li\u003e\n  \u003cli\u003eFull-range 8+ channel Spektrum DSMX\/DSM2 compatible transmitter (required for SAFE Select and motor reversing)\u003c\/li\u003e\n  \u003cli\u003eOne 6S 22.2V 3200–4000mAh 30C+ LiPo battery with EC5 or IC5 connector (not included)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (not included)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Smart ESC Programming Update Box (required for reverse thrust function only, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799036981485,"sku":"EFL011500","price":1152.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110898_Image1.jpg?v=1752047241"},{"product_id":"e-flite-efl013550-carbon-z-t-28-trojan-2-0m-with-smart-bnf-basic","title":"E-flite Carbon-Z T-28 Trojan 2.0m Smart BNF Basic RC Warbird - EFL013550","description":"\u003cp\u003eThe E-flite Carbon-Z T-28 Trojan 2.0m (EFL013550) is a large-scale RC warbird finished in a fully painted yellow scheme, supplied as a BNF Basic model ready to bind to a compatible Spektrum transmitter. Spanning 77.95 inches (1980mm), this RC plane is built from Carbon-Z composite-reinforced EPO foam, giving it the rigidity of a conventional airframe at a fraction of the weight. Designed for intermediate to experienced pilots, it combines genuine large-scale presence with approachable handling thanks to Spektrum AS3X stabilisation and optional SAFE Select flight envelope protection. The 2.0m T-28 Trojan has been updated over earlier versions with Smart electronics, more reliable electric retracts, LED landing and navigation lights, and a brushless power system centred on the Spektrum Avian 70A Smart Lite ESC.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpektrum AS3X technology provides constant gyroscopic stabilisation for a locked-in, scale-like feel across a wide range of conditions.\u003c\/li\u003e\n  \u003cli\u003eOptional SAFE Select flight envelope protection can be switched on or off, making this large RC plane more forgiving for pilots stepping up to giant-scale warbirds for the first time.\u003c\/li\u003e\n  \u003cli\u003eThe Spektrum AR637TA 6-channel receiver delivers full-range DSMX telemetry, feeding real-time battery voltage, current, and RPM data back to a compatible transmitter via the Avian Smart ESC.\u003c\/li\u003e\n  \u003cli\u003eFunctional electric retracts with scale strut covers and doors, steerable nosewheel, wide-stance tricycle undercarriage, and working flaps all contribute to realistic ground and air handling.\u003c\/li\u003e\n  \u003cli\u003eTwo-piece wing and stabiliser design breaks down quickly for transport and storage without tools, and assembly from flat-packed is estimated at under one hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Carbon-Z T-28 Trojan 2.0m airframe (fully painted)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 70A Brushless Smart Lite ESC (factory installed)\u003c\/li\u003e\n  \u003cli\u003e60BL 500Kv brushless outrunner motor (factory installed)\u003c\/li\u003e\n  \u003cli\u003e7 metal-geared servos (factory installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR637TA 6-channel DSMX receiver with AS3X and SAFE Select (factory installed)\u003c\/li\u003e\n  \u003cli\u003e14.75 x 10 propeller\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 6 to 8 or more channel Spektrum DSMX or DSM2 compatible transmitter\u003c\/li\u003e\n  \u003cli\u003e6S 22.2V 3200–7000mAh LiPo battery with EC5 or IC5 connector\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799040356589,"sku":"EFL013550","price":1730.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110899_Image1.jpg?v=1752047244"},{"product_id":"e-flite-0efl01950-eratix-3d-flat-foamy-860mm-bnf-basic","title":"E-flite Eratix 3D Flat Foamy 860mm BNF-Basic RC Plane - EFL01950","description":"\u003cp\u003eThe E-flite Eratix 3D Flat Foamy (EFL01950) is an 860mm wingspan BNF-Basic RC plane designed for 3D aerobatics, sport flying, and slow-speed manoeuvres, and is aimed at intermediate to experienced pilots looking for a capable flat foamy without a complex scratch build. Unlike traditional flat foam models that require hours of cutting, gluing, and taping, the Eratix 3D FF arrives mostly factory-assembled with the power system and servos already installed, and snaps together in less time than it takes to charge a battery. Weighing in at just 376g and spanning 864mm, this RC aircraft is compact and light enough to fly indoors in a gymnasium or outdoors in a park or sports field, making it a genuinely versatile addition to any hangar.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpektrum AR630 receiver is factory-installed and delivers AS3X stabilisation technology for a locked-in, planted feel throughout the flight envelope\u003c\/li\u003e\n  \u003cli\u003eOptional SAFE Select flight envelope protection can be enabled for pilots who want an extra safety margin while learning 3D manoeuvres\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 15A Smart ESC provides real-time telemetry including battery voltage, current, and RPM data when paired with a compatible Spektrum transmitter\u003c\/li\u003e\n  \u003cli\u003eFactory-installed 2405-1200KV brushless outrunner motor is matched to run on 3S 600–850mAh LiPo batteries with an IC2 connector\u003c\/li\u003e\n  \u003cli\u003eHighly durable yet lightweight EPP foam airframe is reinforced with carbon fibre and composite materials, with snap-fit landing gear that requires no tools to remove or replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Eratix 3D FF 860mm airframe (mostly factory-assembled)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 15A Brushless Smart ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian Brushless Outrunner Motor 2405-1200KV (installed)\u003c\/li\u003e\n  \u003cli\u003e3x Spektrum sub-micro digital servos including metal-geared aileron servo (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR630 receiver (installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 5-channel or more Spektrum DSMX or DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V 600–850mAh LiPo battery with IC2 connector — a JST-RCY battery can be used with a suitable IC2 to JST-RCY adapter (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799041765613,"sku":"EFL01950","price":592.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110912_Image1.jpg?v=1752047254"},{"product_id":"e-flite-0efl02050-sr-71-blackbird-twin-40mm-edf-bnf-basic-with-as3x-and-safe-select","title":"E-flite SR-71 Blackbird Twin 40mm EDF BNF Basic with AS3X and SAFE Select RC Aircraft - EFL02050","description":"\u003cp\u003eThe E-flite SR-71 Blackbird Twin 40mm EDF (EFL02050) is a BNF Basic RC jet that recreates the iconic Mach 3 reconnaissance aircraft for intermediate to advanced RC pilots. Spanning 19.88 inches (505mm) in wingspan and stretching 37.6 inches (955mm) in length, this twin EDF jet arrives almost completely factory-assembled and binds directly to any full-range 5+ channel Spektrum DSMX or DSM2 transmitter. Built around a lightweight but tough EPO airframe, it's equipped with Spektrum AS3X stabilisation technology and optional-use SAFE Select flight envelope protection, making it the most approachable SR-71 EDF model E-flite has produced. Whether you're taxiing from a smooth runway with the included retractable-style fixed landing gear or hand-launching from grass, this RC plane offers a genuinely unique flying experience.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwin 40mm EDF fans powered by Spektrum brushless outrunner motors (1820-6800Kv 6-pole) compatible with 4S 14.8V 2200mAh 30C+ LiPo batteries via IC3 connector\u003c\/li\u003e\n  \u003cli\u003eAS3X technology provides real-time gyroscopic correction for locked-in, stable flight in variable conditions\u003c\/li\u003e\n  \u003cli\u003eOptional-use SAFE Select adds flight envelope protection that can be switched off as pilot confidence grows — suited to skill level 3 pilots\u003c\/li\u003e\n  \u003cli\u003eIncludes fixed landing gear with a steerable nose wheel for smooth-surface taxi, takeoff, and landing; gear can be removed for hand-launch flying over grass using moulded-in finger grips and automatic Hand Launch Assist Mode\u003c\/li\u003e\n  \u003cli\u003eExtra set of red-painted vertical fins included for improved in-flight visibility, plus a rubber nose cone with pitot tube that snaps on and off for easy storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite SR-71 Blackbird Twin 40mm EDF airframe (factory-finished, nearly fully assembled)\u003c\/li\u003e\n  \u003cli\u003e4 x Spektrum linear servos (installed)\u003c\/li\u003e\n  \u003cli\u003e2 x Spektrum brushless outrunner motors (installed)\u003c\/li\u003e\n  \u003cli\u003e1 x Spektrum control unit with integrated receiver and dual brushless ESCs (installed)\u003c\/li\u003e\n  \u003cli\u003eFixed landing gear with steerable nose wheel\u003c\/li\u003e\n  \u003cli\u003eOptional-use red-painted vertical fins\u003c\/li\u003e\n  \u003cli\u003eRubber nose cone with pitot tube\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 5+ channel Spektrum DSMX or DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e4S 14.8V 2200mAh 30C+ LiPo battery with IC3 or EC3 connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799041863917,"sku":"EFL02050","price":570.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110913_Image1.jpg?v=1752047256"},{"product_id":"e-flite-efl08450-p-47-razorback-1-2m-bnf-basic","title":"E-flite P-47 Razorback 1.2m BNF Basic RC Warbird - EFL08450","description":"\u003cp\u003eThe E-flite P-47 Razorback 1.2m BNF Basic (EFL08450) is a WWII RC warbird modelled on the iconic P-47 Thunderbolt, built for intermediate pilots stepping into scale warbird flying for the first time. With a 1,200mm (47.24 inch) wingspan and a lightweight EPO airframe, this RC plane strikes a genuine balance between scale detail and accessible, enjoyable flight. The BNF Basic format means the airframe, motor, ESC, servos, and Spektrum AR631 receiver are all factory-installed and ready to bind to a compatible Spektrum transmitter — no glue required, and assembly takes less than an hour. Spektrum AS3X technology provides real-time stability correction for a locked-in, composed feel in the air, while the optional SAFE Select flight envelope protection gives less experienced pilots an extra safety net when they need it. The power system accepts both 3S and 4S LiPo batteries without modification, so you can tune flight performance to your preference.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver with AS3X stabilisation and optional-use SAFE Select flight envelope protection fitted as standard\u003c\/li\u003e\n  \u003cli\u003eCompatible with 3S 11.1V and 4S 14.8V LiPo batteries (2200–3200mAh) using an IC3 connector, with no power system changes needed between the two\u003c\/li\u003e\n  \u003cli\u003e70A Spektrum Avian Smart Lite ESC delivers real-time telemetry including battery voltage, current, and RPM to compatible Spektrum transmitters\u003c\/li\u003e\n  \u003cli\u003eFunctional electric retracts and working flaps add genuine scale behaviour to takeoffs, landings, and slow-speed flight\u003c\/li\u003e\n  \u003cli\u003eDetachable one-piece wing makes storage and transport practical without full disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite P-47 Razorback 1.2m airframe\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 70A Smart Lite Brushless ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum brushless outrunner motor (installed)\u003c\/li\u003e\n  \u003cli\u003e6x Spektrum micro servos (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver (installed)\u003c\/li\u003e\n  \u003cli\u003eOptional-use drop tank, bombs, and rocket launchers\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 6 to 7+ channel Spektrum DSMX or DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V or 4S 14.8V LiPo battery, 2200–3200mAh, with IC3 connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799043076333,"sku":"EFL08450","price":961.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110923_Image1.jpg?v=1753137544"},{"product_id":"e-flite-efl14025-ultra-stick-1-1m-arf","title":"E-flite Ultra Stick 1.1m ARF RC Plane Kit - EFL14025","description":"\u003cp\u003eThe E-flite Ultra Stick 1.1m ARF (EFL14025) is a sport aerobatic RC plane built around a lightweight balsa and lite-ply airframe, aimed at intermediate to experienced fixed-wing pilots looking for a capable everyday flyer. With a 1,100mm (43.31\") wingspan and a symmetrical airfoil, this RC aircraft delivers strong low-speed handling for relaxed landings alongside the high-speed performance needed for basic to mild 3D aerobatics. The ARF format means the airframe bolts together in roughly one to three hours with no glue required, leaving you free to choose your own power system, servos, and electronics to suit your flying style.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-up balsa and lite-ply wood construction keeps the airframe light at 898g without battery, while providing the stiffness and durability that foam models struggle to match.\u003c\/li\u003e\n  \u003cli\u003eOne-piece symmetrical wing installs and removes with a single thumbscrew, and is pre-drilled to accept two additional servos for crow, flaps, or full-span aileron\/flaperon\/spoileron setups.\u003c\/li\u003e\n  \u003cli\u003eStiffer tail surfaces lock in place quickly with just two locknuts, and the main landing gear mounts securely with four bolts.\u003c\/li\u003e\n  \u003cli\u003eSteerable tailwheel and large tyres allow take-off and landing on grass as well as paved surfaces.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 3S 11.1V or 4S 14.8V 2200–3200mAh LiPo batteries, giving you flexibility over power output and flight duration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Ultra Stick 1.1m ARF airframe (EFL14025)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 4 to 7+ channel transmitter and compatible receiver\u003c\/li\u003e\n  \u003cli\u003e4 to 6 sub-micro servos (4 minimum, 6 if using optional crow or flap setup)\u003c\/li\u003e\n  \u003cli\u003e250–500W capable brushless motor\u003c\/li\u003e\n  \u003cli\u003eCompatible electronic speed controller (ESC)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V or 4S 14.8V 2200–3200mAh LiPo battery\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799045992685,"sku":"EFL14025","price":417.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110946_Image1.jpg?v=1752047303"},{"product_id":"e-flite-efl14050-ultra-stick-1-1m-bnf-basic-with-as3x-and-safe-select","title":"E-flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select RC Plane - EFL14050","description":"\u003cp\u003eThe E-flite Ultra Stick 1.1m BNF Basic (EFL14050) is a 1.1-metre fixed-wing RC plane built for sport flying and aerobatics, suited to intermediate and experienced pilots. Based on the design of the larger Hangar 9 Ultra Stick models and inspired by the iconic Mini Ultra Stick, this updated version uses built-up balsa and lite-ply construction for a lightweight yet stiff airframe that outperforms moulded foam models in handling and durability. It arrives as a Bind-N-Fly Basic, meaning the electronics are factory-installed and ready to bind to a compatible Spektrum DSMX transmitter — no building required beyond a quick bolt-together assembly. The BNF Basic version includes AS3X stabilisation technology and optional-use SAFE Select flight envelope protection, making it more approachable without removing the aerobatic capability that sport flyers are after. Compatible with 3S or 4S LiPo batteries in the 2200–3200mAh range, this RC plane offers a wide performance window from relaxed sport flying through to basic 3D aerobatics.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-up balsa and lite-ply airframe is lightweight, stiff, and more durable than comparable moulded foam RC planes\u003c\/li\u003e\n  \u003cli\u003eAS3X technology provides real-time stability correction for a locked-in, precise feel in the air\u003c\/li\u003e\n  \u003cli\u003eSAFE Select is optional-use flight envelope protection — switch it on to limit attitudes and aid recovery, or fly without it for full aerobatic freedom\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver supports fly-by range telemetry, reporting battery voltage, current, and ESC temperature to compatible Spektrum transmitters\u003c\/li\u003e\n  \u003cli\u003e45-amp Spektrum Avian Smart Lite ESC and brushless outrunner motor are compatible with both 3S and 4S LiPo packs without any modifications\u003c\/li\u003e\n  \u003cli\u003eOne-piece wing with a fully symmetrical airfoil attaches and removes with a single thumbscrew and can accept two additional servos for crow, flaps, or full-span flaperon setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Ultra Stick 1.1m airframe (BNF Basic, factory assembled)\u003c\/li\u003e\n  \u003cli\u003eFour Spektrum metal-geared servos (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum brushless outrunner motor (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum Avian 45-amp Brushless Smart Lite ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum AR631 6-channel receiver with AS3X and SAFE Select (installed)\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 4–7+ channel Spektrum DSMX or DSM2 compatible transmitter (not included)\u003c\/li\u003e\n  \u003cli\u003e3S 11.1V or 4S 14.8V 2200–3200mAh LiPo battery with EC3 or IC3 connector (not included)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo balance charger (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799046123757,"sku":"EFL14050","price":815.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110947_Image1.jpg?v=1752047306"},{"product_id":"e-flite-efl16450-air-tractor-1-5m-bnf-basic-with-as3x-and-safe-select","title":"E-flite Air Tractor 1.5m BNF Basic with AS3X and SAFE Select RC Plane - EFL16450","description":"\u003cp\u003eThe E-flite Air Tractor 1.5m (EFL16450) is a BNF Basic RC plane modelled after the iconic agricultural aircraft, designed for intermediate pilots who want a distinctive, slow-flying model with built-in electronic stabilisation. With a 1.5-metre wingspan, it delivers a stable, scale-like flight experience that suits relaxed sport flying and low-altitude passes. AS3X (Artificial Stabilisation 3-Axis) technology works in the background to smooth out the effects of wind and turbulence, while SAFE Select gives pilots the option to enable self-levelling and pitch and bank angle limits when needed — useful when conditions get tricky or if you want a confidence boost. As a BNF Basic model, it binds directly to a compatible Spektrum transmitter, so no additional receiver is required.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.5m wingspan provides a large, stable platform suited to calm-weather sport flying and scale-style passes\u003c\/li\u003e\n  \u003cli\u003eAS3X stabilisation actively counters wind and turbulence without changing the feel of normal flight inputs\u003c\/li\u003e\n  \u003cli\u003eSAFE Select mode can be switched on or off via a spare transmitter channel, offering self-levelling and angle limits when needed\u003c\/li\u003e\n  \u003cli\u003eBNF Basic format binds to compatible Spektrum DSMX\/DSM2 transmitters — no separate receiver needed\u003c\/li\u003e\n  \u003cli\u003eAgriculturally themed airframe with scale detailing makes it a visually distinctive model at the field\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Air Tractor 1.5m airframe (factory assembled)\u003c\/li\u003e\n  \u003cli\u003eAS3X and SAFE Select receiver\/stabilisation system (installed)\u003c\/li\u003e\n  \u003cli\u003eElectric motor (installed)\u003c\/li\u003e\n  \u003cli\u003eESC (installed)\u003c\/li\u003e\n  \u003cli\u003eServos (installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Spektrum DSMX or DSM2 transmitter (minimum 5 channels recommended)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo flight battery (refer to E-flite product page for recommended cell count and capacity)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo battery charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799046287597,"sku":"EFL16450","price":748.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110948_Image1.jpg?v=1752047309"},{"product_id":"e-flite-efl23850-twin-timber-1-6m-bnf-basic-with-as3x-and-safe-select","title":"E-flite Twin Timber 1.6m BNF Basic with AS3X and SAFE Select RC Plane - EFL23850","description":"\u003cp\u003eThe E-flite Twin Timber 1.6m BNF Basic (EFL23850) is a twin-motor STOL-capable RC plane equipped with AS3X stabilisation and SAFE Select flight envelope protection, aimed at a wide range of pilots from capable beginners to experienced sport flyers. Building on the Timber series' reputation for easy handling and short-field performance, the Twin Timber adds a second brushless outrunner motor, differential thrust, and motor reversing — features that open up unique ground handling and aerobatic possibilities not available on single-motor Timber models. At 1.6 metres wingspan, this RC aircraft is substantial enough to handle rough terrain and water operations yet remains manageable for everyday flying sessions. The BNF Basic format means the airframe, motors, ESC, servos, and receiver are all installed and ready to bind — you supply a compatible Spektrum DSMX transmitter and a suitable LiPo battery.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwin Spektrum brushless outrunner motors drive counter-rotating 3-blade props, supporting 3S (11.1V) or 4S (14.8V) LiPo batteries in the 2200–5000mAh range for flexible power options.\u003c\/li\u003e\n  \u003cli\u003eA Spektrum Avian Dual 40A Smart ESC delivers real-time telemetry including battery voltage and ESC temperature via compatible Spektrum AirWare transmitters and the installed AR637TA receiver.\u003c\/li\u003e\n  \u003cli\u003eDifferential thrust and motor reversing allow precise ground steering and aerobatic manoeuvres that a single-motor aircraft cannot replicate.\u003c\/li\u003e\n  \u003cli\u003eAS3X technology provides a locked-in, stable feel in flight, while optional-use SAFE Select adds flight envelope protection that can be switched on or off to suit pilot preference.\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps, optional-use leading-edge slats, wing-mounted motors for prop protection, oversized tundra-style wheels, and factory-fitted LED landing, navigation, and strobe lights are all included as standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite Twin Timber 1.6m airframe (factory assembled)\u003c\/li\u003e\n  \u003cli\u003e6 x Spektrum metal-geared servos (installed)\u003c\/li\u003e\n  \u003cli\u003e2 x Spektrum brushless outrunner motors (installed)\u003c\/li\u003e\n  \u003cli\u003e1 x Spektrum Avian Dual 40A Brushless Smart ESC (installed)\u003c\/li\u003e\n  \u003cli\u003e1 x Spektrum AR637TA 6-channel receiver with DSMX and full-range telemetry (installed)\u003c\/li\u003e\n  \u003cli\u003e1 x Set of optional-use leading-edge slats\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Full-range 6 to 8 or more channel Spektrum DSMX or DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e1 x 3S 11.1V or 4S 14.8V 2200–5000mAh LiPo battery with EC3 or IC3 connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003e1 x Compatible LiPo balance charger (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799046549741,"sku":"EFL23850","price":1097.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/110950_Image1.jpg?v=1752047312"},{"product_id":"e-flite-eflu16450-umx-air-tractor-bnf-basic-with-as3x-and-safe-select","title":"E-flite UMX Air Tractor BNF Basic with AS3X and SAFE Select RC Plane - EFLU16450","description":"\u003cp\u003eThe E-flite UMX Air Tractor BNF Basic (EFLU16450) is an ultra-micro RC plane modelled on the iconic agricultural utility aircraft, built for intermediate to experienced RC pilots looking for a capable and characterful low-wing flyer. With a 27.64-inch (702mm) wingspan and 100% factory-assembled foam construction, this Bind-N-Fly model arrives ready to bind to a compatible Spektrum transmitter and fly — no building required. It replicates the real Air Tractor's high-visibility yellow and blue trim scheme with moulded-in panel lines and rivets, and backs up the scale looks with genuinely useful flying features including functional flaps, LED navigation and landing lights, and oversized tires that allow operation from paved, dirt, gravel, and some grass surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpektrum AS3X technology provides active stabilisation for a locked-in, smooth feel in varied conditions\u003c\/li\u003e\n  \u003cli\u003eOptional SAFE Select flight envelope protection can be switched on to assist pilots newer to low-wing or scale models\u003c\/li\u003e\n  \u003cli\u003e2S and 3S LiPo compatible — run a 2S 280–300mAh pack for sport flying or a 3S for more power and unlimited vertical performance without any modifications\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps improve slow-speed handling and enable Short Takeoff and Landing (STOL) capability\u003c\/li\u003e\n  \u003cli\u003eFactory-installed LED navigation, strobe, and landing lights add scale realism and improve visibility in the air\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eE-flite UMX Air Tractor BNF Basic RC plane (factory assembled and painted)\u003c\/li\u003e\n  \u003cli\u003e5x Spektrum linear servos (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum brushless outrunner motor, 1208 2150kv (installed)\u003c\/li\u003e\n  \u003cli\u003eSpektrum control unit with integrated receiver and brushless ESC (installed)\u003c\/li\u003e\n  \u003cli\u003eUMX Air Tractor BNF Basic instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-range 6-channel or greater Spektrum DSMX or DSM2 compatible transmitter (sold separately)\u003c\/li\u003e\n  \u003cli\u003e2S 7.4V or 3S 11.1V 280–300mAh LiPo battery with JST-RCY connector (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCompatible LiPo battery charger (sold separately)\u003c\/li\u003e\n  \u003cli\u003eNote: if your battery uses a JST-PH connector, a JST-RCY to JST-PH adapter such as the SPMXCA327 is required (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E-flite","offers":[{"title":"Default Title","offer_id":44799055593709,"sku":"EFLU16450","price":448.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111030_Image1.jpg?v=1752047398"},{"product_id":"seagull-models-sea03n-arising-star-v2-trainer-63-wingspan-46-glow-engine-or-10cc-0-07m3","title":"Seagull Models Arising Star V2 63in .46 Glow or 10cc RC Trainer Plane - SEA03N","description":"\u003cp\u003eThe Seagull Models Arising Star V2 (SEA03N) is a 63-inch wingspan ARF RC trainer plane designed for beginner pilots flying on glow or gasoline power. With a 1600mm wingspan and an approximate flying weight of 2.3 to 2.7 kg, it's sized to fly steadily and forgive the kinds of mistakes that come with learning. Seagull Models builds the Arising Star V2 to an almost-ready-to-fly standard, meaning the fuselage arrives factory-covered with decals applied, control hinges pinned and glued, pushrods installed, and the engine mount already fitted. The bulk of the construction work is done before you open the box, so you're spending time flying rather than building.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e63-inch (1600mm) wingspan with a wing area of 645 sq. in., giving stable, predictable flight characteristics suited to beginners\u003c\/li\u003e\n  \u003cli\u003eFactory-pinned and glued control hinges and pre-installed pushrods reduce assembly time and eliminate common build errors\u003c\/li\u003e\n  \u003cli\u003ePre-covered airframe with decals and trim applied — no covering iron or finishing work required\u003c\/li\u003e\n  \u003cli\u003eCompatible with a .40–.46 cu. in. 2-stroke glow engine or a .50–.52 cu. in. 4-stroke glow engine, as well as a 10cc petrol engine\u003c\/li\u003e\n  \u003cli\u003eApproximate flying weight of 2.3–2.7 kg (5–6 lbs) keeps wing loading manageable for new pilots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-built and covered fuselage with flying surfaces\u003c\/li\u003e\n  \u003cli\u003eComprehensive hardware pack including machined wheels, wheel spats, undercarriage, spinner, linkages, and fuel tank\u003c\/li\u003e\n  \u003cli\u003ePhoto-illustrated step-by-step assembly manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e.40–.46 cu. in. 2-stroke OR .50–.52 cu. in. 4-stroke glow engine (or 10cc petrol engine)\u003c\/li\u003e\n  \u003cli\u003e4-channel radio system with four servos\u003c\/li\u003e\n  \u003cli\u003ePropeller suited to your chosen engine\u003c\/li\u003e\n  \u003cli\u003eGlow fuel and associated starting accessories (glow starter, fuel pump, fuel tubing)\u003c\/li\u003e\n  \u003cli\u003eEngine-appropriate muffler if not included with your engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799139184877,"sku":"SEA03N","price":372.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111465_Image1.jpg?v=1762719789"},{"product_id":"seagull-models-sea10n-10cc-lw-sport-60-wingspan-new-version-0-07m3","title":"Seagull Models 10cc LW Sport 60in Wingspan RC Aircraft Kit - SEA10N","description":"\u003cp\u003eThe Seagull Models SEA10N 10cc LW Sport is a 60-inch wingspan low-wing trainer aircraft kit built for pilots stepping up from a high-wing trainer to more aerobatic flying. This ARF balsa and ply RC plane comes mostly built and pre-covered, so you finish assembly at home and fit your own engine and radio gear. With a 153cm wingspan and a flying weight of around 5.5 to 6.2 lbs, it flies smoothly and predictably while still rewarding cleaner stick inputs as your skills develop. The 2023 revision brings a new colour scheme and refined design, making this low-wing trainer a solid choice for intermediate flyers who want a stable, capable RC aircraft that handles both glow and petrol power.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e60 inch (153cm) wingspan with a 620 sq.in wing area for stable, controllable low-wing flight\u003c\/li\u003e\n  \u003cli\u003eFuselage length of 45 inches (113.7cm) and an approximate flying weight of 5.5 to 6.2 lbs (2.5 to 2.8kg)\u003c\/li\u003e\n  \u003cli\u003eDesigned as a low-wing trainer, ideal as a second aircraft after a high-wing trainer\u003c\/li\u003e\n  \u003cli\u003eAccepts 0.40 to 0.46 cu.in 2-stroke, 0.52 cu.in 4-stroke glow, or 10cc petrol engines (OS 46AXII recommended)\u003c\/li\u003e\n  \u003cli\u003eSupplied as an ARF airframe with pre-applied covering to keep the build straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built and pre-covered low-wing trainer airframe\u003c\/li\u003e\n  \u003cli\u003eHardware and fittings to complete assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.40 to 0.46 cu.in 2-stroke, 0.52 cu.in 4-stroke glow, or 10cc petrol engine\u003c\/li\u003e\n  \u003cli\u003eMinimum 4-channel radio system with receiver and servos\u003c\/li\u003e\n  \u003cli\u003ePropeller and fuel suited to your chosen engine\u003c\/li\u003e\n  \u003cli\u003eGlow or petrol starting equipment and field accessories\u003c\/li\u003e\n  \u003cli\u003eBuilding adhesives and basic tools to complete assembly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799139315949,"sku":"SEA10N","price":409.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111466_Image1.jpg?v=1756943470"},{"product_id":"seagull-models-sea114p-nemesis-nxt-f1-air-race-80-5-wingspan-50cc-60cc-fluorescent-red-0-24m3","title":"Seagull Models Nemesis NXT F1 Air Race 80.5in 50cc-60cc RC Plane Fluorescent Red - SEA114P","description":"\u003cp\u003eThe Seagull Models Nemesis NXT F1 Air Race (SEA114P) is an 80.5-inch wingspan ARF fixed-wing aircraft designed for intermediate to advanced pilots, built around the iconic F1 air racing pylon format. Finished in a high-visibility fluorescent red (pink family) colour scheme, this large-scale RC plane suits pilots looking to enter Australian F1 class air racing or fly a scale racer for sport. The airframe combines laser-cut balsa and plywood construction to keep weight down while maintaining the rigidity expected of a 50cc to 60cc-powered aircraft. Most of the build work is done at the factory, so assembly is straightforward — but this is an ARF, not ready-to-fly, and requires an engine or electric power system, radio gear, and servos before it can take to the air.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e80.5-inch (2045mm) wingspan with a wing area of 1069.5 sq. in, suited to 50cc–60cc gasoline engines or an electric equivalent\u003c\/li\u003e\n  \u003cli\u003eLaser-cut ply and balsa airframe keeps flying weight to approximately 12.3 lbs (5.6 kg) while providing solid structural strength\u003c\/li\u003e\n  \u003cli\u003eNew F1 firewall design built to meet F1 air racing class requirements\u003c\/li\u003e\n  \u003cli\u003eLarge top-hatch provides easy access for battery or fuel system changes between flights\u003c\/li\u003e\n  \u003cli\u003eFactory-fitted fibreglass wheel pants and cowl; electric conversion is supported as an option\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeagull Models Nemesis NXT F1 ARF airframe (SEA114P) in fluorescent red\u003c\/li\u003e\n  \u003cli\u003eFull hardware set including fuel tank, engine mount, wheels, and spinner\u003c\/li\u003e\n  \u003cli\u003eFactory fibreglass wheel pants and cowl\u003c\/li\u003e\n  \u003cli\u003ePilot figure\u003c\/li\u003e\n  \u003cli\u003eIllustrated step-by-step instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e50cc–60cc gasoline engine or electric power system equivalent\u003c\/li\u003e\n  \u003cli\u003e6-channel radio transmitter and receiver\u003c\/li\u003e\n  \u003cli\u003e6 to 7 servos\u003c\/li\u003e\n  \u003cli\u003ePropeller suited to chosen engine\u003c\/li\u003e\n  \u003cli\u003eMiscellaneous assembly tools and adhesives\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799139447021,"sku":"SEA114P","price":1196.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111467_Image1.jpg?v=1762719792"},{"product_id":"seagull-models-sea138n-swift-v2-trainer-63-wingspan-tail-dragger-conversion-46-glow-engine-or-10cc-0-08m3","title":"Seagull Models Swift V2 Trainer 63in Tail Dragger Conversion RC Plane Kit - SEA138N","description":"\u003cp\u003eThe Seagull Models Swift V2 Trainer (SEA138N) is a 63\" wingspan low-wing RC trainer aircraft set up in tail dragger configuration and designed for pilots moving beyond their first high-wing model. This Seagull Models RC plane kit can be flown on a .46 size glow engine or a 10cc equivalent, making it a flexible choice for glow power. With its low-wing layout and stable handling, the Swift V2 suits intermediate flyers and is capable of all the basic aerobatics once you've got your hands in. It arrives as a build-it-yourself RC aircraft kit, so you'll assemble the airframe and fit your own power system and radio gear before flying.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e63 inch (1600 mm) wingspan low-wing trainer airframe\u003c\/li\u003e\n  \u003cli\u003eUpdated V2 release in tail dragger configuration with a redefined colour scheme\u003c\/li\u003e\n  \u003cli\u003ePowered by a .46 size glow engine or 10cc equivalent\u003c\/li\u003e\n  \u003cli\u003eLength 1164 mm (45.8\") with a wing area of 41.5 sq.dm (643.3 sq.in)\u003c\/li\u003e\n  \u003cli\u003eStable low-wing handling suited to intermediate pilots and basic aerobatics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built Swift V2 airframe components\u003c\/li\u003e\n  \u003cli\u003eAll required hardware\u003c\/li\u003e\n  \u003cli\u003eAssembly manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-channel radio system\u003c\/li\u003e\n  \u003cli\u003eServos\u003c\/li\u003e\n  \u003cli\u003e.46 size glow engine or 10cc equivalent (OS .46 AX II recommended)\u003c\/li\u003e\n  \u003cli\u003eSuitable propeller\u003c\/li\u003e\n  \u003cli\u003eGlow fuel and field starting equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799139873005,"sku":"SEA138N","price":377.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111470_Image1.jpg?v=1756943476"},{"product_id":"seagull-models-sea180n-new-aviat-a-1c-christen-husky-80-wingspan-size-15-20cc-0-12m3","title":"Seagull Models New Aviat A-1C Christen Husky 80in Wingspan 15-20cc RC Aircraft Kit - SEA180N","description":"\u003cp\u003eThe Seagull Models SEA180N Aviat A-1C Christen Husky is an 80-inch wingspan balsa RC aircraft kit designed for intermediate to advanced pilots running 15–20cc petrol engines or an electric equivalent. Based on the full-scale Aviat Husky, a celebrated light general aviation design that earned certification in 1987, this RC plane captures the real aircraft's proportions and character in a large-scale balsa and plywood build. The striking yellow and black colour scheme is applied at the factory using genuine Oracover film covering, giving the model a clean, durable finish straight out of the box. With a wingspan of 2032mm (80 inches) and an approximate flying weight of 4000–4670g, this is a substantial sport-scale model suited to pilots with experience flying larger aircraft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-piece plug-in wings with aluminium tube joiner for easy field assembly and transport\u003c\/li\u003e\n  \u003cli\u003eBarn-door ailerons and large functional flaps for realistic flight characteristics and slower landing speeds\u003c\/li\u003e\n  \u003cli\u003eMagnetically secured top hatch allows quick access to battery or fuel system without tools\u003c\/li\u003e\n  \u003cli\u003eUpgraded construction accepts 15–20cc petrol engines or an electric motor via the included adjustable EP motor box\u003c\/li\u003e\n  \u003cli\u003eCompatible with optional float sets (sold separately) for water operations, and includes a pilot figure, seat, and instrument panel decal for added scale detail\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFuselage\u003c\/li\u003e\n  \u003cli\u003eWing set (2 panels)\u003c\/li\u003e\n  \u003cli\u003eTail set\u003c\/li\u003e\n  \u003cli\u003eCanopy\u003c\/li\u003e\n  \u003cli\u003eFibreglass cowling\u003c\/li\u003e\n  \u003cli\u003eWing tube joiner\u003c\/li\u003e\n  \u003cli\u003eLanding gear with 4.5-inch air rubber wheels\u003c\/li\u003e\n  \u003cli\u003eTail wheel\u003c\/li\u003e\n  \u003cli\u003eFuel tank\u003c\/li\u003e\n  \u003cli\u003ePushrod set\u003c\/li\u003e\n  \u003cli\u003eAdjustable EP motor box\u003c\/li\u003e\n  \u003cli\u003eWindows\u003c\/li\u003e\n  \u003cli\u003eWing struts (2)\u003c\/li\u003e\n  \u003cli\u003eFibreglass control horns\u003c\/li\u003e\n  \u003cli\u003ePilot figure, pilot seat, and instrument panel decal\u003c\/li\u003e\n  \u003cli\u003eAll necessary hardware (excluding electronics and engine)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e15–20cc petrol engine or electric motor equivalent\u003c\/li\u003e\n  \u003cli\u003e6-channel RC radio system\u003c\/li\u003e\n  \u003cli\u003e7 servos\u003c\/li\u003e\n  \u003cli\u003ePropeller suited to chosen engine\u003c\/li\u003e\n  \u003cli\u003eElectronic speed controller (if using electric power)\u003c\/li\u003e\n  \u003cli\u003eBattery and compatible charger (if using electric power)\u003c\/li\u003e\n  \u003cli\u003eMiscellaneous assembly tools and adhesives\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799140135149,"sku":"SEA180N","price":957.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111472_Image1.jpg?v=1756943481"},{"product_id":"seagull-models-sea209n-maxi-lift-87-6-in-wingwingspan-33cc-new-version-color-scheme-3d-cnc-tail-gear-air-rubber-wheel-4-5-0-16m3","title":"Seagull Models Maxi Lift 87.6in Wingspan 33cc New Colour Scheme RC Plane Kit - SEA209N","description":"\u003cp\u003eThe Seagull Models SEA209N Maxi Lift is an 87.6-inch wingspan balsa kit RC plane designed for beginner to intermediate pilots who want a versatile, capable high-wing aircraft. With a 222.2 cm span and a fuselage length of 61.2 inches, this is a substantial model that suits sport flying, club flying, and glider towing duties equally well. The Maxi Lift is built from CAD-designed, CNC laser-cut balsa and plywood, covered in genuine UltraCote film, and powered by a 33cc petrol engine or electric equivalent. This updated version introduces a refreshed colour scheme, a 3D CNC-machined tail gear assembly, and 4.5-inch air rubber wheels for improved ground handling.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e87.6-inch (222.2 cm) wingspan with a two-piece plug-in wing design for straightforward transport and assembly\u003c\/li\u003e\n  \u003cli\u003eCNC laser-cut balsa and plywood airframe covered in genuine UltraCote for a durable, lightweight structure weighing 11.5 to 12.1 lbs (5.2 to 5.5 kg)\u003c\/li\u003e\n  \u003cli\u003eFunctional wing flaps, operational bomb bay doors, and a built-in glider tow hook make this RC plane genuinely multi-role\u003c\/li\u003e\n  \u003cli\u003eFiberglass cowl and wheel pants included, along with a strong aluminium wing joiner tube\u003c\/li\u003e\n  \u003cli\u003eComplete hardware pack supplied; 3D CNC tail gear and 4.5-inch air rubber wheels are new for this SEA209N version\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLaser-cut balsa and plywood airframe components\u003c\/li\u003e\n  \u003cli\u003eTwo-piece plug-in wing panels with aluminium wing joiner tube\u003c\/li\u003e\n  \u003cli\u003eFiberglass cowl and wheel pants\u003c\/li\u003e\n  \u003cli\u003e4.5-inch air rubber wheels with 3D CNC tail gear assembly\u003c\/li\u003e\n  \u003cli\u003eBuilt-in glider tow hook and operational bomb bay door mechanism\u003c\/li\u003e\n  \u003cli\u003eComplete hardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e33cc petrol engine or electric equivalent\u003c\/li\u003e\n  \u003cli\u003e8-channel radio system with 8 servos\u003c\/li\u003e\n  \u003cli\u003ePropeller to suit chosen engine\u003c\/li\u003e\n  \u003cli\u003eFuel system (if using petrol engine) or battery and ESC (if using electric)\u003c\/li\u003e\n  \u003cli\u003eMiscellaneous adhesives and assembly tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799140331757,"sku":"SEA209N","price":962.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111474_Image1.jpg?v=1756943485"},{"product_id":"seagull-models-sea255y-classic-ugly-stick-70-9-10-15cc-yellow-0-14m3","title":"Seagull Models Classic Ugly Stick 70.9in 10-15cc Yellow RC Aircraft Kit - SEA255Y","description":"\u003cp\u003eThe Seagull Models Classic Ugly Stick 70.9\" (SEA255Y) is a balsa and plywood sport aerobat RC plane aimed at intermediate and advanced pilots. Based on the time-tested Ugly Stick design, this ARF airframe spans 1800mm and flies on glow, gasoline, or electric power, making it a versatile sport model that handles everyday aerobatics with predictable, forgiving manners. Finished in yellow genuine Oracover with pre-cut decals, this RC aircraft kit arrives largely built and covered, leaving you to fit the power system, radio gear, and final hardware before flying.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpans 1800mm (70.9\") with a wing area of 1033.2 sq in for stable, responsive sport flying\u003c\/li\u003e\n  \u003cli\u003eBuilt from light balsa and balsa-plywood for a strong airframe at a manageable flying weight of around 3.5kg\u003c\/li\u003e\n  \u003cli\u003eCovered and trimmed in genuine Oracover with pre-cut decals for a clean factory finish\u003c\/li\u003e\n  \u003cli\u003eCounterbalanced rudder design for more dynamic control and crisp aerobatic response\u003c\/li\u003e\n  \u003cli\u003eAccepts nitro, gasoline, or electric power, with an electric conversion kit included for flexible setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built and covered balsa\/ply airframe in yellow Oracover\u003c\/li\u003e\n  \u003cli\u003ePre-cut decals\u003c\/li\u003e\n  \u003cli\u003eElectric conversion components including motor mount and battery mount\u003c\/li\u003e\n  \u003cli\u003eAll necessary mounting hardware and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne power system: a 10-15cc gasoline engine, a .60-.91 glow engine, or a 1200-1500W brushless motor and matching ESC\u003c\/li\u003e\n  \u003cli\u003eComputer radio system with 5 servos\u003c\/li\u003e\n  \u003cli\u003eGlow plug or propeller to suit your chosen engine\u003c\/li\u003e\n  \u003cli\u003eFor electric setups, a suitable battery and charger sold separately\u003c\/li\u003e\n  \u003cli\u003eFuel and field gear appropriate to your power choice\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799140921581,"sku":"SEA255Y","price":713.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111479_Image1.jpg?v=1756943491"},{"product_id":"seagull-models-sea284g-ju-87-stuka-desert-snake-90-wingspan55cc-matte-finish-new-scheme-0-31m3","title":"Seagull Models JU-87 Stuka Desert Snake 90in 55cc Matte Finish RC Aircraft Kit - SEA284G","description":"\u003cp\u003eThe Seagull Models SEA284G JU-87 Stuka is a giant-scale RC aircraft kit depicting the iconic WWII German dive bomber in a striking Desert Snake matte finish. Spanning 90 inches (228.6 cm), this is a serious build aimed at intermediate to advanced RC pilots who want a large, visually commanding warbird with authentic scale detail. The Desert Snake scheme is a new colour option for this model, finished in genuine matte Oracover film that gives it a realistic, non-reflective appearance on the flight line.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBalsa and plywood construction keeps the airframe lightweight relative to its 90-inch wingspan\u003c\/li\u003e\n  \u003cli\u003eCovered in genuine matte Oracover film with factory-painted fibreglass engine cowl and wheel spats\u003c\/li\u003e\n  \u003cli\u003eScale details include functional dive brakes, semi-floating flaps and ailerons, sirens, bombs, and a detailed glasshouse cockpit with painted pilot and rear gunner figures\u003c\/li\u003e\n  \u003cli\u003ePlugin outer wing panels for easier transport and quicker field assembly\u003c\/li\u003e\n  \u003cli\u003eRemovable cockpit hatch provides access to radio gear and flight battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeagull Models JU-87 Stuka airframe kit (SEA284G, Desert Snake matte finish)\u003c\/li\u003e\n  \u003cli\u003eFactory-covered and painted major components ready for final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e38–50cc petrol engine (not included)\u003c\/li\u003e\n  \u003cli\u003e6-channel radio system (not included)\u003c\/li\u003e\n  \u003cli\u003eMinimum 7 servos (not included)\u003c\/li\u003e\n  \u003cli\u003eFlight battery and compatible charger (not included)\u003c\/li\u003e\n  \u003cli\u003eFuel, propeller, and associated engine hardware (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799141773549,"sku":"SEA284G","price":1559.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111487_Image1.jpg?v=1762719810"},{"product_id":"seagull-models-sea313-tempest-dragon-lw-trainer-81-wingspan-15cc-0-13m3-new-may-23","title":"Seagull Models Tempest Dragon LW Trainer 81in Wingspan 15cc RC Plane Kit - SEA313","description":"\u003cp\u003eThe Seagull Models Tempest Dragon LW Trainer (SEA313) is an 81-inch wingspan ARF low-wing RC plane built for pilots stepping up from a basic trainer to a low-wing aircraft. It arrives almost ready to fly, with the airframe conventionally built from balsa and plywood for strength while keeping the overall weight down to around 4.5kg. The Tempest Dragon is designed to take a 15cc gasoline engine, and its low-wing layout and predictable handling make it a forgiving step into low-wing flying without the twitchiness of a true sport model. Most of the build work is already done at the factory, so this radio control plane focuses your time on installing power and radio gear rather than airframe construction.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBalsa and plywood airframe using CAD design and laser-cut parts for accurate, light construction\u003c\/li\u003e\n  \u003cli\u003e81 inch (206cm) wingspan with a 57.5 inch (146cm) fuselage length and 971.2 sq.in wing area\u003c\/li\u003e\n  \u003cli\u003eLow-wing layout with stable, trainer-friendly flight characteristics\u003c\/li\u003e\n  \u003cli\u003eFactory-built and finished major components with motor mount fitted and hinges pre-installed\u003c\/li\u003e\n  \u003cli\u003eDetailed cockpit with pilot figure included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-built and covered balsa and plywood airframe\u003c\/li\u003e\n  \u003cli\u003ePre-fitted motor mount\u003c\/li\u003e\n  \u003cli\u003ePre-installed control surface hinges\u003c\/li\u003e\n  \u003cli\u003eCockpit with pilot figure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e15cc gasoline engine\u003c\/li\u003e\n  \u003cli\u003ePropeller to suit the chosen engine\u003c\/li\u003e\n  \u003cli\u003e6 channel computer radio with 7 servos\u003c\/li\u003e\n  \u003cli\u003eFuel and standard field support gear to run the engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799142199533,"sku":"SEA313","price":442.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111491_Image1.jpg?v=1756943516"},{"product_id":"seagull-models-sea327b-cessna-182-skylane-69wingspan-46-or-10cc-pearl-blue-0-08m3","title":"Seagull Models Cessna 182 Skylane 69in Wingspan Pearl Blue RC Aircraft Kit 1\/6 Scale - SEA327B","description":"\u003cp\u003eThe Seagull Models Cessna 182 Skylane is a 69-inch wingspan ARF RC aircraft built for intermediate to advanced sport flyers who want a semi-scale civilian model that's easy to handle in the air. Finished in an eye-catching Pearl Blue scheme, this 1\/6 scale RC plane (part code SEA327B) recreates the much-loved Cessna 182 Skylane and flies with the predictable, forgiving manners that make the full-size aircraft so popular. It accepts a .46 to .62 glow engine, a gas\/petrol equivalent, or an 830KV electric setup, so you can power it the way you prefer. The balsa and plywood airframe is sheeted where it counts to keep the model strong without adding excess weight, and the two-piece plug-in wings on an aluminium wing tube make this RC aircraft easy to transport and quick to set up at the field.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e69-inch wingspan semi-scale Cessna 182 Skylane with a balsa and plywood airframe and iron-on covering\u003c\/li\u003e\n  \u003cli\u003eTwo-piece plug-in wings mounted on an aluminium wing tube for easy transport and storage\u003c\/li\u003e\n  \u003cli\u003ePainted fibreglass cowl and wheel pants with aluminium airfoil wing struts for a clean scale look\u003c\/li\u003e\n  \u003cli\u003eScale oleo nose gear and painted aluminium main landing gear for solid ground handling\u003c\/li\u003e\n  \u003cli\u003eGlow, gas\/petrol and electric power options with a supplied conversion mount and room for an electric setup\u003c\/li\u003e\n  \u003cli\u003e6-channel control over throttle, ailerons, elevator, rudder and flaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory assembled and covered fuselage\u003c\/li\u003e\n  \u003cli\u003eFactory assembled and covered two-piece wing set\u003c\/li\u003e\n  \u003cli\u003eFactory assembled and covered fin and rudder\u003c\/li\u003e\n  \u003cli\u003eFactory assembled and covered tailplane\u003c\/li\u003e\n  \u003cli\u003eFactory painted fibreglass cowl\u003c\/li\u003e\n  \u003cli\u003eTricycle undercarriage set with wheels\u003c\/li\u003e\n  \u003cli\u003eMain wing spar and wing strut set\u003c\/li\u003e\n  \u003cli\u003eElectric power conversion mount\u003c\/li\u003e\n  \u003cli\u003eComprehensive hardware pack including screws, horns, pushrods and fuel tank\u003c\/li\u003e\n  \u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e.46 to .62 cu. in. glow engine, gas\/petrol equivalent, or 830KV electric motor with matching ESC\u003c\/li\u003e\n  \u003cli\u003e6-channel computer transmitter and receiver\u003c\/li\u003e\n  \u003cli\u003eSix suitable servos for throttle, ailerons, elevator, rudder and flaps\u003c\/li\u003e\n  \u003cli\u003ePropeller and spinner to suit your chosen power system\u003c\/li\u003e\n  \u003cli\u003eFlight battery and charger if running electric power\u003c\/li\u003e\n  \u003cli\u003eFuel and field equipment if running a glow or petrol engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799142297837,"sku":"SEA327B","price":661.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111492_Image1.jpg?v=1762719819"},{"product_id":"seagull-models-sea365-t-28-north-america-86-wingspan-35-60cc-without-retracts-including-rubber-wheels-september-2023","title":"Seagull Models T-28 North American 86in Wingspan 35-60cc RC Aircraft Kit - SEA365","description":"\u003cp\u003eThe Seagull Models T-28 Trojan (SEA365) is a large-scale RC warbird kit spanning an impressive 86 inches, designed for experienced pilots running 35-60cc petrol engines. Based on the iconic North American T-28 trainer aircraft, this model delivers a scale appearance and commanding presence in the air that suits intermediate to advanced RC pilots looking for a serious fixed-gear warbird build. The SEA365 ships without retracts and includes rubber wheels, making it a straightforward fixed-undercarriage build focused on getting you flying rather than adding mechanical complexity.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e86-inch wingspan puts this firmly in the large-scale category, giving it stable, smooth flight characteristics typical of bigger petrol-powered RC aircraft\u003c\/li\u003e\n  \u003cli\u003eDesigned for 35-60cc petrol engines, offering a wide power plant compatibility range to suit your preferred engine setup\u003c\/li\u003e\n  \u003cli\u003eFixed landing gear configuration with rubber wheels included — no retract system means fewer mechanical points of failure and a simpler build process\u003c\/li\u003e\n  \u003cli\u003eKit format gives you full control over your engine choice, paint finish, and final assembly, with the airframe pre-built to varying degrees as standard for Seagull Models kits\u003c\/li\u003e\n  \u003cli\u003eMilitary T-28 Trojan subject with scale outline and panel detail makes this a standout model at the flight line\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeagull Models T-28 Trojan ARF airframe (86\" wingspan)\u003c\/li\u003e\n  \u003cli\u003eRubber wheels for fixed landing gear\u003c\/li\u003e\n  \u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e35-60cc petrol engine (not included)\u003c\/li\u003e\n  \u003cli\u003eEngine muffler and mounting hardware appropriate to your chosen engine\u003c\/li\u003e\n  \u003cli\u003eRC radio system — minimum 6-channel recommended for a warbird of this size\u003c\/li\u003e\n  \u003cli\u003eServos (quantity dependent on your chosen radio and flight surface setup)\u003c\/li\u003e\n  \u003cli\u003eFuel tank and fuel tubing\u003c\/li\u003e\n  \u003cli\u003eSpinners and propeller suited to your chosen engine\u003c\/li\u003e\n  \u003cli\u003eCyanoacrylate (CA) glue and epoxy for assembly\u003c\/li\u003e\n  \u003cli\u003ePaint and finishing materials if you wish to apply a custom scheme\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799142428909,"sku":"SEA365","price":1949.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111493_Image1.jpg?v=1762719822"},{"product_id":"seagull-models-sea383-ae-edge-540-v2-77-5wingspan-35-40cc-organge-upgraded-carbon-fiber-structures-aerobatic-version-new-may-2023-18m3","title":"Seagull Models Edge 540 V2 77.5in Wingspan 35-40cc Orange Carbon Fibre RC Aerobatic Plane - SEA383.AE","description":"\u003cp\u003eThe Seagull Models Edge 540 V2 (SEA383.AE) is a large-scale ARTF aerobatic RC plane designed for intermediate to advanced pilots, powered by a 35–40cc gasoline engine or equivalent electric setup. Spanning 77.5 inches (1970mm) and stretching 71 inches (1790mm) in length, this is a serious aerobatic aircraft built for pilots ready to push their flying beyond basic sport patterns. The airframe combines balsa, plywood, and upgraded carbon fibre structures — including carbon tubes in the fuselage and wing set — to keep weight down while improving stiffness and durability over the previous version. With most of the assembly already completed at the factory, the Edge 540 V2 is quicker to get airworthy than a traditional build, without sacrificing the structural integrity you'd expect from a plane at this size and performance level.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e77.5-inch wingspan with a wing area of 1023 sq. in (66 sq. dm) and an approximate flying weight of 11.66 lbs (5.3 kg)\u003c\/li\u003e\n  \u003cli\u003eUpgraded carbon fibre construction uses four carbon tubes (5x5x4mm) in the fuselage and four in the wing set for added rigidity\u003c\/li\u003e\n  \u003cli\u003eFiberglass tube wing spar replaces the paper tube used in the previous version, improving strength and moisture resistance\u003c\/li\u003e\n  \u003cli\u003eLarger ailerons and elevator plus side force generators are included in the aerobatic version for enhanced knife-edge and 3D performance\u003c\/li\u003e\n  \u003cli\u003ePre-installed super hinges on the wing set, elevator, and rudder speed up final assembly; wings and stabiliser are fully removable for transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeagull Models Edge 540 V2 ARTF airframe (SEA383.AE)\u003c\/li\u003e\n  \u003cli\u003eCarbon fibre structural tubes (4x fuselage, 4x wing set)\u003c\/li\u003e\n  \u003cli\u003eFiberglass control horns\u003c\/li\u003e\n  \u003cli\u003eSide force generators\u003c\/li\u003e\n  \u003cli\u003eStandard aerobatic version hardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e35–40cc gasoline engine, or equivalent electric motor and power system\u003c\/li\u003e\n  \u003cli\u003e6-channel minimum computer radio transmitter and receiver\u003c\/li\u003e\n  \u003cli\u003eHigh-torque servos (quantity to suit control surface count)\u003c\/li\u003e\n  \u003cli\u003eBatteries and charger to suit your chosen power and radio setup\u003c\/li\u003e\n  \u003cli\u003eFuel and associated plumbing if running a gasoline engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799142887661,"sku":"SEA383.AE","price":854.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111496_Image1.jpg?v=1756943529"},{"product_id":"seagull-models-sea388-vans-rv-8-71-arf-35-40cc-aerobatics-and-3d-new-2023-replaces-sea249-kits","title":"Seagull Models Van\u0026#39;s RV-8 71in ARF 35-40cc RC Aircraft Kit - SEA388","description":"\u003cp\u003eThe Seagull Models Van's RV-8 71\" ARF (SEA388) is a large-scale aerobatic RC plane built for 35-40cc gas or electric power and aimed at intermediate to advanced pilots. Modelled on Richard VanGrunsven's classic low-wing RV-8 homebuilt, this ARF aircraft kit arrives factory-covered in genuine Oracover film with a high-visibility scheme and a 71-inch (180 cm) wingspan. It's a fully aerobatic airframe that climbs well, tracks cleanly, and is stable enough for sportsman and intermediate aerobatics as well as light 3D flying. As an ARF, the major airframe is pre-built and covered, so you finish assembly and fit your own power and radio gear. This SEA388 release replaces the earlier SEA249 kit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLaser-cut balsa and ply construction with carbon reinforcement for a light but strong airframe\u003c\/li\u003e\n  \u003cli\u003eFunctional flaps, scale hinges and removable wings for a wider flight envelope and easier transport\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminium landing gear with carbon fibre wing tube (19mm) and tail tube (12mm)\u003c\/li\u003e\n  \u003cli\u003eDetailed cockpit with scale pilot, instrument decal and clear canopy, plus pre-wired scale LED navigation lights\u003c\/li\u003e\n  \u003cli\u003eIncludes a 500ml RC fuel tank with clunk, turnbuckle-style pushrods, ball links and a motor mount for the electric power option\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built and factory-covered RV-8 airframe in Oracover film\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminium landing gear and carbon fibre tail gear assembly\u003c\/li\u003e\n  \u003cli\u003eCarbon fibre wing tube (19mm) and horizontal tail tube (12mm)\u003c\/li\u003e\n  \u003cli\u003e500ml transparent fuel tank with clunk, fill and vent nipples\u003c\/li\u003e\n  \u003cli\u003ePU rubber wheels with plastic hubs\u003c\/li\u003e\n  \u003cli\u003eTurnbuckle-style pushrods, ball links and turnbuckle wrench\u003c\/li\u003e\n  \u003cli\u003eFiberglass control horns and complete hardware kit\u003c\/li\u003e\n  \u003cli\u003eMotor mount for electric power option\u003c\/li\u003e\n  \u003cli\u003ePre-wired scale LED navigation lights\u003c\/li\u003e\n  \u003cli\u003eScale pilot figure, instrument decal and clear canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e35-40cc gas engine or equivalent electric brushless motor and ESC\u003c\/li\u003e\n  \u003cli\u003ePropeller to suit your chosen engine or motor\u003c\/li\u003e\n  \u003cli\u003e6-channel radio system (minimum) with 8 standard servos\u003c\/li\u003e\n  \u003cli\u003eReceiver and flight battery to suit your setup\u003c\/li\u003e\n  \u003cli\u003eFuel and field equipment if using a gas engine\u003c\/li\u003e\n  \u003cli\u003eGeneral assembly supplies such as adhesives and tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799142985965,"sku":"SEA388","price":989.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111497_Image1.jpg?v=1756943533"},{"product_id":"seagull-models-sea38b-harrier-3d-funfly-60-5-wingspan-size-90-100-arf-transparent-blue-0-13m3","title":"Seagull Models Harrier 3D Funfly 60.5in Wingspan .90-100 ARF Transparent Blue RC Aircraft Kit - SEA38B","description":"\u003cp\u003eThe Seagull Models SEA38B Harrier 3D Funfly is a 60.5-inch wingspan ARF RC plane designed for aerobatics and 3D flying, powered by a .90 to 1.00 size nitro engine. Finished in a striking transparent blue covering, the Harrier 3D is aimed at experienced pilots who want a capable, large-format funfly aircraft that can handle precision aerobatics, hovering, and high-alpha manoeuvres. As an Almost Ready to Fly kit, the airframe comes largely pre-built, so you spend less time constructing and more time setting up and flying.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e60.5-inch wingspan gives the Harrier 3D a commanding presence in the air and stable platform for 3D and aerobatic manoeuvres\u003c\/li\u003e\n  \u003cli\u003eDesigned for .90 to 1.00 size nitro engines, providing the power needed for aggressive vertical climbs, torque rolls, and hovering\u003c\/li\u003e\n  \u003cli\u003eARF construction means the airframe is pre-covered and pre-assembled to a high degree, reducing bench time before first flight\u003c\/li\u003e\n  \u003cli\u003eTransparent blue Oracover-style film covering provides good air visibility and a clean, distinctive appearance\u003c\/li\u003e\n  \u003cli\u003eSuited to experienced pilots comfortable with high-performance nitro aerobatic aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built and covered Harrier 3D Funfly airframe\u003c\/li\u003e\n  \u003cli\u003eHardware pack (control horns, linkages, and fasteners as required for assembly completion)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e.90 to 1.00 size nitro engine (not included)\u003c\/li\u003e\n  \u003cli\u003eRC transmitter and receiver (minimum 4-channel recommended for aerobatic use)\u003c\/li\u003e\n  \u003cli\u003eServos suitable for a large aerobatic aircraft (quantity and size as required by your build)\u003c\/li\u003e\n  \u003cli\u003eFuel tank and nitro fuel\u003c\/li\u003e\n  \u003cli\u003ePropeller compatible with your chosen engine\u003c\/li\u003e\n  \u003cli\u003eGlow starter, fuel pump, and associated field equipment\u003c\/li\u003e\n  \u003cli\u003eMain landing gear and tail wheel assembly if not included in hardware pack (verify on receipt)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799143084269,"sku":"SEA38B","price":699.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/SEA38B-1.jpg?v=1724880456"},{"product_id":"seagull-models-sea38r-harrier-3d-funfly-60-5-wingspan-size-90-100-arf-transparent-red-0-13m3","title":"Seagull Models Harrier 3D Funfly 60.5in .90-100 ARF Transparent Red RC Plane - SEA38R","description":"\u003cp\u003eThe Seagull Models SEA38R Harrier 3D is a 60.5-inch wingspan ARF aerobatic RC plane designed specifically for 3D and sequence aerobatics, aimed at intermediate to advanced fixed-wing pilots. Built from balsa and plywood and covered in genuine UltraCote film in transparent red, this RC aircraft arrives largely pre-built so you can focus on completing the power system and radio setup rather than starting from scratch. The Harrier 3D is engineered to handle the full range of extreme 3D manoeuvres — solid harriers, torque rolls, blenders, and rolling circles — while remaining stable and manageable enough to help pilots build and refine their aerobatic skills.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCovered in genuine UltraCote film in transparent red, providing a durable and lightweight finish straight from the box\u003c\/li\u003e\n  \u003cli\u003eBalsa and plywood airframe construction keeps weight in the 7–8 lb flying weight range while maintaining structural rigidity for 3D stress loads\u003c\/li\u003e\n  \u003cli\u003eFiberglass cowl and wheel pants included for a cleaner finish and reduced frontal drag\u003c\/li\u003e\n  \u003cli\u003eCompatible with .91–1.10 two- or four-stroke glow engines, 15cc petrol engines, or an electric equivalent — an optional EP conversion kit is also provided\u003c\/li\u003e\n  \u003cli\u003eRequires a 6-channel radio system with 6 servos, giving full control authority for advanced aerobatic flight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-built Harrier 3D ARF airframe with UltraCote covering\u003c\/li\u003e\n  \u003cli\u003eFiberglass cowl\u003c\/li\u003e\n  \u003cli\u003eFiberglass wheel pants\u003c\/li\u003e\n  \u003cli\u003eOptional EP conversion kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e.91–1.10 two- or four-stroke glow engine, 15cc petrol engine, or electric equivalent\u003c\/li\u003e\n  \u003cli\u003eGlow plug (engine specific, if using glow power)\u003c\/li\u003e\n  \u003cli\u003eSilicone fuel line (if using glow or petrol power)\u003c\/li\u003e\n  \u003cli\u003e6-channel radio transmitter and receiver\u003c\/li\u003e\n  \u003cli\u003e6 servos\u003c\/li\u003e\n  \u003cli\u003ePropeller suitable for chosen power system\u003c\/li\u003e\n  \u003cli\u003eBattery and charger if using electric power conversion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seagull Models","offers":[{"title":"Default Title","offer_id":44799143182573,"sku":"SEA38R","price":699.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/111499_Image1.jpg?v=1762719826"}],"url":"https:\/\/www.hobbycity.nz\/collections\/rc-planes-aircraft-1.oembed?page=5","provider":"Hobby City NZ","version":"1.0","type":"link"}