{"title":"RC Aircraft Spares","description":"","products":[{"product_id":"motor-install-kit-dle20-prox-60-90","title":"Aeroworks Motor Install Kit DLE20 Prox 60\/90 - ARW104","description":"\u003cp\u003eThe Aeroworks Motor Install Kit (ARW104) is an engine mount kit designed to fit the DLE20 engine into the Aeroworks Prox 60 and Prox 90 RC aircraft. This motor install kit supplies the hardware needed to mount and align the DLE20 in the firewall, making it the correct fitment for builders setting up or converting a Prox 60\/90 airframe to DLE20 power. If you're running a DLE20 in your Prox model, this is the matched mounting kit for that combination.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePurpose-built motor mount kit for installing the DLE20 in Aeroworks Prox 60 and Prox 90 airframes\u003c\/li\u003e\n  \u003cli\u003eProvides correct engine standoff spacing and alignment for the DLE20\u003c\/li\u003e\n  \u003cli\u003eDirect-fit hardware sized for the Prox 60\/90 firewall\u003c\/li\u003e\n  \u003cli\u003eSold as a dedicated spare for builders and engine swaps on the Prox series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAeroworks DLE20 motor install kit (ARW104) mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDLE20 engine\u003c\/li\u003e\n  \u003cli\u003eAeroworks Prox 60 or Prox 90 airframe\u003c\/li\u003e\n  \u003cli\u003eStandard build tools for engine installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aeroworks","offers":[{"title":"Default Title","offer_id":49273924423,"sku":"ARW104","price":60.0,"currency_code":"NZD","in_stock":true}]},{"product_id":"carbon-tube-set-100cc-planes","title":"Aeroworks Carbon Tube Set 100CC Planes RC Aircraft Part - ARW116","description":"\u003cp\u003eThe Aeroworks Carbon Tube Set (ARW116) is a replacement wing tube set for Aeroworks 100CC aircraft. These carbon wing tubes locate the wing panels onto the fuselage and carry the structural load in flight, making them a key part to keep on hand for any large-scale Aeroworks 100CC build or repair. If you've damaged or lost the original tubes, this set is the direct-fit replacement for your Aeroworks 100CC plane.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon fibre construction for high strength at low weight\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Aeroworks 100CC class aircraft\u003c\/li\u003e\n  \u003cli\u003eSupports wing panels and transfers flight loads through the fuselage\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for the original Aeroworks wing tubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAeroworks carbon wing tube set for 100CC planes (ARW116)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAeroworks 100CC aircraft to fit the wing tubes to\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aeroworks","offers":[{"title":"Default Title","offer_id":49273928839,"sku":"ARW116","price":225.0,"currency_code":"NZD","in_stock":true}]},{"product_id":"dash-panel-50cc-edge-540","title":"Aeroworks Dash Panel 50CC Edge 540 RC Aircraft Part - ARW200","description":"\u003cp\u003eThe Aeroworks Dash Panel (ARW200) is a direct replacement part for the Aeroworks 50CC EDGE 540 RC aircraft. This dash panel fits the 50CC EDGE 540 airframe specifically, making it the correct factory spare when the original is damaged or missing. If you fly the Aeroworks Edge 540 50CC and need to restore the cockpit area, this is the matched replacement component for that model.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine Aeroworks spare part for the 50CC EDGE 540 airframe\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement that matches the original dash panel\u003c\/li\u003e\n  \u003cli\u003eMaintains the correct fit and finish of the EDGE 540 cockpit area\u003c\/li\u003e\n  \u003cli\u003ePart number ARW200 for quick part-number searches and reordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Aeroworks Dash Panel (ARW200) for the 50CC EDGE 540\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAeroworks Edge 540 50CC airframe to fit this part to\u003c\/li\u003e\n  \u003cli\u003eAdhesive or fixings as required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aeroworks","offers":[{"title":"Default Title","offer_id":49273930823,"sku":"ARW200","price":85.0,"currency_code":"NZD","in_stock":true}]},{"product_id":"4-5-inch-two-blade-aluminum-spinner","title":"AS 4.5 Inch Two-Blade Aluminium RC Aircraft Spinner - AS2-45","description":"\u003cp\u003eThe AS 4.5 inch two-blade aluminium spinner (AS2-45) is a machined alloy propeller spinner for two-blade props on RC aircraft. Designed to fit standard two-blade propellers, this RC spinner gives the nose of your model plane a clean, finished look while securing the prop and centring it on the shaft. The aluminium construction is more durable than plastic equivalents, making it a solid choice for sport, scale, and trainer aircraft where you want a tidy, sturdy spinner up front.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMachined from aluminium for strength and a polished finish\u003c\/li\u003e\n  \u003cli\u003eSized at 4.5 inches in diameter for two-blade propellers\u003c\/li\u003e\n  \u003cli\u003eTwo-blade design with slots to clear the prop blades\u003c\/li\u003e\n  \u003cli\u003eBackplate and cone secure the propeller cleanly on the shaft\u003c\/li\u003e\n  \u003cli\u003ePart number AS2-45 for easy reordering and spares searches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 4.5 inch two-blade aluminium spinner (cone and backplate)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware as supplied by the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eA two-blade propeller sized to suit this spinner\u003c\/li\u003e\n  \u003cli\u003eA matching propeller shaft and motor or engine on your aircraft\u003c\/li\u003e\n  \u003cli\u003eSuitable mounting hardware if not supplied\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AS","offers":[{"title":"Default Title","offer_id":49273995655,"sku":"AS2-45","price":89.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/24026_Image1.jpg?v=1762811409"},{"product_id":"mini-lite-wheels-1-inch-pair","title":"Dubro 1in (25mm) Mini Lite RC Wheel (2pcs) - DUB100MW","description":"\u003cp\u003eThe Dubro 100MW Mini Lite Wheels are a pair of 1-inch (25 mm) lightweight RC aircraft wheels designed as direct-fit replacements or lightweight alternatives for small to mid-sized radio control aircraft. Dubro is a well-established name in RC aviation hardware, and the Mini Lite series is a popular choice for modellers looking for a reliable, correctly sized wheel for nose gear or main undercarriage applications on park flyers, trainers, and similar aircraft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1-inch (25 mm) diameter suits a wide range of small to mid-sized RC aircraft undercarriage setups\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps added weight to the airframe minimal\u003c\/li\u003e\n  \u003cli\u003eSold as a pair, making them suitable for a standard main gear replacement in one purchase\u003c\/li\u003e\n  \u003cli\u003eDubro's Mini Lite design offers a clean, functional profile well suited to grass and hard-surface flying fields\u003c\/li\u003e\n  \u003cli\u003eStyle code DUB100MW for straightforward reordering and cross-referencing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRC aircraft using 1-inch (25 mm) main or nose gear wheels\u003c\/li\u003e\n  \u003cli\u003ePark flyers, electric trainers, and similar small-scale radio control aircraft\u003c\/li\u003e\n  \u003cli\u003eStandard RC aircraft wheel axle setups accepting 1-inch wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro Mini Lite Wheels x 2 (1-inch \/ 25 mm diameter)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277706311,"sku":"DUB100MW","price":14.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27392_Image1.jpg?v=1752012501"},{"product_id":"strip-aileron-link-hook-up","title":"Dubro Strip Aileron Hook-Up RC Aircraft Linkage - DUB101","description":"\u003cp\u003eDubro 101 Strip Aileron Linkage Hook-Up (2pcs)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cbr\u003eNo shrink, no stretch, free running, and fully adjustable at control horn. Complete assembly includes 2 ea. Solder Link, Kwik Link, Nylon Sleeve, 2-56 Rods and link guards. \u003c\/p\u003e\u003cp\u003eWeight: 22 g\u003cbr\u003eQuantity: 2 assemblies\u003c\/p\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277708999,"sku":"DUB101","price":22.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/DUB101chart.jpg?v=1762811884"},{"product_id":"nylon-steel-kwik-rod-assy","title":"Dubro Nylon Steel Kwik-Rod Assembly RC Aircraft Spare Part - DUB102","description":"\u003cp\u003eThe Dubro DUB102 Nylon Steel Kwik-Rod Assembly is a single-piece RC aircraft linkage hardware component designed for building and connecting control rod systems in RC planes and gliders. Dubro is a long-established name in RC linkage and hardware, and the Kwik-Rod system is a practical solution for routing push-pull control linkages between servos and control surfaces. This type of nylon and steel rod assembly combines a threaded steel rod with a nylon body, allowing straightforward adjustment of linkage length and tension during setup or maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCombines a steel threaded rod with a nylon body for a lightweight yet durable linkage assembly\u003c\/li\u003e\n  \u003cli\u003eDesigned for push-pull control rod applications connecting servos to control surfaces\u003c\/li\u003e\n  \u003cli\u003eAdjustable rod length makes it easy to set and fine-tune control throws during aircraft setup\u003c\/li\u003e\n  \u003cli\u003eSold as a single piece, making it a convenient replacement or build-quantity purchase\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard RC aircraft linkage hardware and clevis fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Dubro Nylon Steel Kwik-Rod Assembly (DUB102)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible clevis or Z-bend connectors to complete the linkage run\u003c\/li\u003e\n  \u003cli\u003eControl horns and servo arms suited to your aircraft\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools for installation and length adjustment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277711239,"sku":"DUB102","price":10.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27395_Image1.jpg?v=1752012506"},{"product_id":"aileron-horn-set","title":"Dubro Strip Aileron Horn Connectors RC Aircraft Accessory - DUB103","description":"\u003cp\u003eThe Dubro DUB103 Strip Aileron Horn Connectors are a pair of control surface hardware fittings designed for use on fixed-wing RC aircraft. These connectors link your pushrods to aileron control horns, giving you a secure and adjustable connection point for precise aileron deflection. Dubro is a well-regarded name in RC aircraft hardware, and these connectors reflect the same practical, reliable construction the brand is known for among scratch builders and replacement-part seekers alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSold in a pack of two, providing enough for a standard aileron setup on most fixed-wing aircraft\u003c\/li\u003e\n  \u003cli\u003eStrip-style design allows for multiple attachment points along the horn, giving you flexibility in throw adjustment\u003c\/li\u003e\n  \u003cli\u003eSuitable for use during a build or as a direct replacement for worn or damaged connectors\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard RC pushrod and control horn setups used across a wide range of fixed-wing models\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps additional weight minimal on smaller aircraft where balance is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2x Dubro Strip Aileron Horn Connectors (DUB103)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable pushrods for your specific aircraft\u003c\/li\u003e\n  \u003cli\u003eControl horns if not already fitted to your control surfaces\u003c\/li\u003e\n  \u003cli\u003eAppropriate tools for installation (e.g. pliers, screwdriver depending on your setup)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277711751,"sku":"DUB103","price":5.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27396_Image1.jpg?v=1762811888"},{"product_id":"kwik-link-on-2-56x12-rod","title":"Dubro Steel Kwik-Link on 12in x 2-56 Rod RC Linkage Rod - DUB108","description":"\u003cp\u003eThe Dubro DUB108 Steel Kwik-Link on 12\" x 2-56 Rod is a pre-assembled RC linkage rod designed for connecting control surfaces, throttle linkages, and other pushrod applications in RC aircraft. Dubro's Kwik-Link system makes field adjustments straightforward — the link snaps open for quick length changes without removing the rod from the model. The 2-56 threaded steel rod provides reliable tension and a secure connection in standard RC aircraft control setups.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled unit combining a 12-inch 2-56 threaded steel rod with a Kwik-Link connector ready to fit\u003c\/li\u003e\n  \u003cli\u003eKwik-Link end allows fast length adjustment and snap-on connection without tools\u003c\/li\u003e\n  \u003cli\u003e2-56 thread standard is widely compatible with common RC aircraft control horns and servo arms\u003c\/li\u003e\n  \u003cli\u003eSteel construction offers durability over nylon or plastic alternatives in higher-load linkage runs\u003c\/li\u003e\n  \u003cli\u003eSold as a single piece, making it practical to replace one damaged rod without buying a full pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Dubro Kwik-Link pre-fitted on 12\" 2-56 threaded steel rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible RC aircraft control horn or servo arm to accept the 2-56 rod end\u003c\/li\u003e\n  \u003cli\u003eBasic tools for trimming or bending the rod to suit your specific installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277712391,"sku":"DUB108","price":5.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27399_Image1.jpg?v=1762811891"},{"product_id":"threaded-coupler-for-1-16","title":"Dubro 2-56 Threaded Couplers for 1\/16in Rod RC Aircraft Part - DUB111","description":"\u003cp\u003eThe Dubro DUB111 2-56 threaded couplers are precision RC linkage connectors designed to join 2-56 threaded rods or clevises to 1\/16-inch diameter pushrods in RC aircraft control systems. Dubro is a well-regarded name in RC aircraft hardware, and these couplers are a practical solution for building or repairing pushrod linkages on ailerons, elevators, rudders, and throttle controls. Each coupler features a 2-56 thread on one end to accept standard 2-56 hardware, with a secure grip on 1\/16-inch rod at the other end, giving you a clean, adjustable connection in your control run.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 thread on one end accepts standard 2-56 clevises, ball links, and threaded rod\u003c\/li\u003e\n  \u003cli\u003eDesigned to clamp securely onto 1\/16-inch diameter pushrods\u003c\/li\u003e\n  \u003cli\u003eAllows fine adjustment of control surface travel once installed in the linkage\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in ailerons, elevator, rudder, and throttle control runs on RC aeroplanes\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight construction keeps added weight to a minimum in small to mid-size aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Dubro 2-56 threaded couplers for 1\/16-inch rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 threaded rod or clevis to suit your specific linkage setup\u003c\/li\u003e\n  \u003cli\u003e1\/16-inch diameter pushrod material if not already fitted to your aircraft\u003c\/li\u003e\n  \u003cli\u003eAppropriate tools for tightening and adjusting the coupler set screws (typically a small hex key or screwdriver)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277716167,"sku":"DUB111","price":7.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27401_Image1.jpg?v=1762811893"},{"product_id":"small-servo-mounting-hardware","title":"Dubro Small Mounting Hardware RC Servo Mount - DUB114","description":"\u003cp\u003eThe Dubro DUB114 Small Servo Mounting Hardware provides the fixings needed to securely install small servos in RC aircraft builds and repairs. Dubro is a long-established name in RC accessories, and this hardware kit gives you the correct mounting screws and grommets to fit small-format servos properly into servo bays without improvising with mismatched fasteners.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for small servo sizes commonly used in RC aircraft\u003c\/li\u003e\n  \u003cli\u003eProvides correct-fit mounting hardware to ensure servos seat securely without movement\u003c\/li\u003e\n  \u003cli\u003eDubro-quality construction for reliable, repeatable installation\u003c\/li\u003e\n  \u003cli\u003eUseful for new builds, servo replacements, or repairs where original hardware has been lost\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB114 Small Servo Mounting Hardware pack (screws and grommets for small servo installation — exact contents per pack as supplied by Dubro)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall servo to be mounted (not included)\u003c\/li\u003e\n  \u003cli\u003eRC aircraft requiring servo installation or replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277720135,"sku":"DUB114","price":15.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27404_Image1.jpg?v=1762811897"},{"product_id":"control-over-ride-servo-saver","title":"Dubro Control Over-Ride Servo Saver - DUB120","description":"\u003cp\u003eThe Dubro DUB120 Control Over-Ride Servo Saver is a mechanical protection component designed to shield RC aircraft servos from damage caused by sudden control surface impacts or overloads. When a control surface is forced beyond its normal range — by a hard landing, ground strike, or over-deflection — the servo saver absorbs the load before it reaches the servo gear train, helping to prevent costly servo failures. Dubro is a well-established name in RC hardware, and the DUB120 is a practical addition to any fixed-wing RC aircraft build where servo protection matters.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAbsorbs shock loads on control linkages before force reaches the servo, reducing the risk of stripped servo gears\u003c\/li\u003e\n  \u003cli\u003eDesigned for use in RC aircraft control systems where over-travel or impact loading is a concern\u003c\/li\u003e\n  \u003cli\u003eMechanical over-ride action allows the control arm to give under excess load and return to position\u003c\/li\u003e\n  \u003cli\u003eCompact design suitable for integration into standard RC aircraft linkage setups\u003c\/li\u003e\n  \u003cli\u003eDubro DUB120 part number makes identification and reordering straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB120 Control Over-Ride Servo Saver unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible RC aircraft servo to mount the servo saver to\u003c\/li\u003e\n  \u003cli\u003eAppropriate control linkage hardware (pushrods, clevises, or horns) for your specific aircraft build\u003c\/li\u003e\n  \u003cli\u003eBasic modelling tools for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277738759,"sku":"DUB120","price":8.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27409_Image1.jpg?v=1762811900"},{"product_id":"nylon-kwik-link-std-size-2pce","title":"Dubro Nylon Kwik Link Standard Size RC Linkage Connector - DUB122","description":"\u003cp\u003eThe Dubro Nylon Kwik Link in standard size (DUB122) is a pushrod connector designed for securing and adjusting control linkages on RC aircraft. Sold in a pack of two, these nylon kwik links allow quick, secure attachment between pushrods and servo or control horn eyelets without soldering or special tools. If you need to fine-tune linkage length or swap a worn connector in the field, the Dubro 122 makes the job straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard size nylon construction suits typical pushrod and control linkage setups on park flyers, trainers, and sport RC aircraft\u003c\/li\u003e\n  \u003cli\u003eScrew-collar design locks the pushrod in place once the correct position is set, preventing unwanted movement during flight\u003c\/li\u003e\n  \u003cli\u003eNo soldering required — the connector threads directly onto standard wire pushrods and tightens by hand or with a small screwdriver\u003c\/li\u003e\n  \u003cli\u003eNylon material resists corrosion and is light enough not to affect control surface balance\u003c\/li\u003e\n  \u003cli\u003eSold as a pair, giving you a spare or allowing simultaneous replacement of two linkage points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Dubro standard size nylon kwik link connectors (DUB122)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible pushrod wire sized for standard Dubro kwik links\u003c\/li\u003e\n  \u003cli\u003eServo or control horn with appropriate eyelet or clevis attachment point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277745095,"sku":"DUB122","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27411_Image1.jpg?v=1762811903"},{"product_id":"nylon-kwik-link-2-56x12-rod","title":"Dubro Nylon Kwik-Link on 12in x 2-56 Threaded Rod RC Linkage Rod - DUB123","description":"\u003cp\u003eThe Dubro DUB123 Nylon Kwik-Link on 12-inch 2-56 threaded rod is a ready-to-use control linkage component for RC aircraft builds and repairs. It pairs a nylon Kwik-Link connector with a pre-threaded 12-inch 2-56 rod, giving you a lightweight, adjustable linkage solution straight out of the packet. Dubro's Kwik-Link fittings are a long-standing standard in the RC flying community, valued for their tool-free clip-on attachment to servo horns and control horns.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNylon Kwik-Link connector clips directly onto standard servo and control horns without tools\u003c\/li\u003e\n  \u003cli\u003e2-56 threaded rod allows precise length adjustment when setting up control throws\u003c\/li\u003e\n  \u003cli\u003e12-inch rod length suits a wide range of fixed-wing aircraft linkage runs\u003c\/li\u003e\n  \u003cli\u003eLightweight nylon construction keeps added weight minimal\u003c\/li\u003e\n  \u003cli\u003eSold as a single piece, making it easy to replace or add one linkage at a time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro Nylon Kwik-Link pre-installed on a 12-inch 2-56 threaded rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible RC aircraft requiring 2-56 linkage connections\u003c\/li\u003e\n  \u003cli\u003eRC aircraft or airframe to install the control linkage into\u003c\/li\u003e\n  \u003cli\u003ePliers or rod bending tool if trimming or forming the rod end to suit your installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277745351,"sku":"DUB123","price":3.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/DUB123.png?v=1762811906"},{"product_id":"wheels-micro-sport-1-1-4-in","title":"Dubro 1.23in (31mm) Micro Sport RC Wheel (Pair) - DUB123MS","description":"\u003cp\u003eThe Dubro 123MS Micro Sport Wheels are a 1.23-inch (31 mm) diameter RC aircraft wheel set designed for lightweight and micro-scale radio control aircraft. Sold as a pair under style code DUB123MS, these Dubro wheels are a go-to choice for builders fitting out small fixed-wing models where a compact, correctly sized wheel is essential for ground handling and takeoff performance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.23-inch (31 mm) diameter suits micro and small-scale RC aircraft landing gear\u003c\/li\u003e\n  \u003cli\u003eSold as a matched pair, providing both main gear wheels in one purchase\u003c\/li\u003e\n  \u003cli\u003eMicro Sport profile keeps weight low, important on lightweight airframes\u003c\/li\u003e\n  \u003cli\u003eDubro is a trusted name in RC aircraft hardware, known for consistent sizing and reliable materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro and small-scale fixed-wing RC aircraft with 31 mm wheel fitment\u003c\/li\u003e\n  \u003cli\u003eRC aircraft landing gear axles sized to accept 1.23-inch wheels\u003c\/li\u003e\n  \u003cli\u003eSuitable for electric and fuel-powered micro sport aircraft builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro 123MS Micro Sport Wheels x 2 (one pair)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277745671,"sku":"DUB123MS","price":9.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27413_Image1.jpg?v=1752012524"},{"product_id":"mini-lite-wheels-1-1-4","title":"Dubro 1.25in (32mm) Mini Lite RC Wheel - DUB125MW","description":"\u003cp\u003eThe Dubro 125MW Mini Lite Wheels are a pair of 1.25-inch (32 mm) lightweight RC aircraft wheels designed as a direct-fit landing gear solution for small fixed-wing models. Dubro is a well-established name in RC aircraft hardware, and these mini wheels are a popular choice for builders and flyers looking to keep nose or tail wheel assemblies light without sacrificing durability. At 32 mm in diameter, they suit park flyers, trainer aircraft, and lightweight sport planes where every gram counts.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25-inch (32 mm) diameter suits small RC aircraft landing gear setups\u003c\/li\u003e\n  \u003cli\u003eLightweight construction helps minimise added weight on park flyers and small trainers\u003c\/li\u003e\n  \u003cli\u003eSold as a pair, providing enough wheels for a standard main gear installation\u003c\/li\u003e\n  \u003cli\u003eDubro part number DUB125MW for straightforward identification and reordering\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard small-diameter axles commonly used in RC aircraft landing gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall fixed-wing RC aircraft with 1.25-inch (32 mm) wheel clearance\u003c\/li\u003e\n  \u003cli\u003ePark flyer and lightweight sport plane landing gear assemblies\u003c\/li\u003e\n  \u003cli\u003eStandard small-diameter RC aircraft axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25-inch Mini Lite Wheels x2 (one pair)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277754311,"sku":"DUB125MW","price":15.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27415_Image1.jpg?v=1752012526"},{"product_id":"bolts-blind-nuts-6-32","title":"Dubro 6-32 Bolts \u0026amp; Blind Nuts Tool - DUB128","description":"\u003cp\u003eThe Dubro DUB128 Bolts and Blind Nuts set provides 6-32 threaded hardware for securing components on RC aircraft builds and repairs. Dubro is a well-established name in RC hardware, and this kit gives you the fasteners needed for clean, reliable assembly where access to the back of a panel or surface is limited. Blind nuts are particularly useful when installing servos, hinges, or brackets in areas where you can't reach behind to hold a conventional nut in place.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 thread size suits a wide range of standard RC aircraft hardware mounting applications\u003c\/li\u003e\n  \u003cli\u003eBlind nut design allows secure fastening in confined spaces where a backing nut cannot be fitted\u003c\/li\u003e\n  \u003cli\u003eSuitable for use during new builds as well as repair and replacement work on existing models\u003c\/li\u003e\n  \u003cli\u003eDubro hardware is a trusted choice among RC aircraft builders for consistent thread quality and fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB128 6-32 bolts and blind nuts set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate screwdriver or hex driver for the bolt head type\u003c\/li\u003e\n  \u003cli\u003eThreadlock compound recommended for vibration-prone installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277760839,"sku":"DUB128","price":8.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27418_Image1.jpg?v=1762811909"},{"product_id":"skt-hd-bolt-blind-nut-4-40x1","title":"Dubro SKT HD Bolt Blind Nut 4-40x1 Tool - DUB129","description":"\u003cp\u003eThe Dubro DUB129 4-40 x 1 heavy-duty socket bolt blind nut is a threaded fastener designed for securing components in RC aircraft builds and repairs. Blind nuts allow you to create a captive threaded anchor point in tight or inaccessible areas where a standard nut can't be reached from behind, making them a practical solution for airframe assembly and hardware installation.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 thread size suits standard RC aircraft hardware and servo mounting applications\u003c\/li\u003e\n  \u003cli\u003eBlind nut design installs into a pre-drilled hole to provide a fixed threaded socket without rear access\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty construction handles the vibration and load demands of RC flying\u003c\/li\u003e\n  \u003cli\u003eCompact size suits lightweight airframe structures without adding unnecessary weight\u003c\/li\u003e\n  \u003cli\u003eSold as a set, providing enough hardware for multiple installation points on a single build\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB129 4-40 x 1 socket bolt blind nuts (quantity as packaged)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate drill bit for pre-drilling the blind nut installation holes\u003c\/li\u003e\n  \u003cli\u003eBlind nut installation tool or appropriately sized bolt and socket for setting the nut\u003c\/li\u003e\n  \u003cli\u003e4-40 bolts or screws to suit your specific application (if not already in your hardware kit)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277763463,"sku":"DUB129","price":8.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27419_Image1.jpg?v=1762811913"},{"product_id":"tail-wheel-w-retainers-1-2in-micro","title":"Dubro with Retainers 1\/2in Micro RC Aircraft Tail Wheel - DUB12MTW","description":"\u003cp\u003eThe Dubro 12MTW Micro Tail Wheel with Retainers is a 1\/2 inch tail wheel assembly designed for small RC aircraft that require a lightweight and reliable tail wheel landing gear solution. Part number DUB12MTW, this micro tail wheel is a practical spare or direct replacement for micro and mini class RC planes where a functioning, secure tail wheel is essential for ground handling and takeoff roll.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2 inch (12mm) diameter micro tail wheel sized for small and micro RC aircraft\u003c\/li\u003e\n  \u003cli\u003eIncludes retainers to keep the wheel securely mounted on the wire or axle\u003c\/li\u003e\n  \u003cli\u003eLightweight construction suited to micro and mini RC plane builds where weight is critical\u003c\/li\u003e\n  \u003cli\u003eSuitable as a direct replacement tail wheel for worn or damaged landing gear on small RC aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro and mini class RC aircraft with tail dragger landing gear configurations\u003c\/li\u003e\n  \u003cli\u003eRC planes accepting a 1\/2 inch tail wheel assembly\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard tail wheel wire setups used across a wide range of small RC aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro 12MTW 1\/2 inch micro tail wheel\u003c\/li\u003e\n  \u003cli\u003eRetainers for secure axle mounting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277766087,"sku":"DUB12MTW","price":6.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27420_Image1.jpg?v=1752012534"},{"product_id":"blind-nuts-2-56-4pce","title":"Dubro Blind Nuts 2-56 4pce RC Hardware - DUB133","description":"\u003cp\u003eThe Dubro DUB133 2-56 blind nuts are a pack of four threaded inserts designed for securing hardware in RC aircraft builds and repairs where access to the back of a panel or surface is limited. Blind nuts allow you to create a secure threaded anchor point in thin materials such as plywood, fibreglass, or ABS without needing a nut on the reverse side. These 2-56 size fasteners are a standard thread size widely used in RC aircraft construction, making them a practical addition to any builder's hardware kit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 thread size matches the standard fastener spec used across a wide range of RC aircraft hardware and control linkages\u003c\/li\u003e\n  \u003cli\u003eBlind nut design installs into a drilled hole and crimps in place, providing a flush or recessed threaded point where rear access is unavailable\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in plywood, fibreglass sheet, and similar thin-wall materials common in RC aircraft airframes\u003c\/li\u003e\n  \u003cli\u003eFour pieces per pack, useful for replacing worn or stripped threads or stocking up during a build\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4 x Dubro 2-56 blind nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate drill bit sized for the blind nut outer diameter\u003c\/li\u003e\n  \u003cli\u003eInstallation tool or pliers suitable for crimping blind nuts into place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277769287,"sku":"DUB133","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27422_Image1.jpg?v=1762811915"},{"product_id":"4-40-blind-nuts-4pcs","title":"Dubro 4-40 Blind Nuts Tool (4 Pack) - DUB135","description":"\u003cp\u003eThe Dubro 4-40 Blind Nuts (DUB135) are threaded steel inserts designed for installing 4-40 screws into RC aircraft airframes where access to the back of the material is limited or impossible. Commonly used when fitting servos, hinges, and control horns into foam, balsa, or composite structures, these blind nuts allow a secure threaded fixing point without needing a nut on the reverse side. A practical hardware staple for builders working on RC aircraft construction and repairs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 thread size suits standard 4-40 screws widely used in RC aircraft hardware\u003c\/li\u003e\n  \u003cli\u003eInstalls flush into thin material surfaces where rear access is restricted\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in balsa, ply, foam board, and light composite airframe materials\u003c\/li\u003e\n  \u003cli\u003eSteel construction provides reliable thread engagement for repeated assembly and disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4 x Dubro 4-40 Blind Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 screws or bolts (sold separately)\u003c\/li\u003e\n  \u003cli\u003eSuitable installation tool or drill bit for preparing the mounting hole\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277769735,"sku":"DUB135","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27424_Image1.jpg?v=1752012538"},{"product_id":"blind-nuts-6-32","title":"Dubro Blind Nuts 6-32 Tool - DUB136","description":"\u003cp\u003eDubro's 6-32 Blind Nuts (DUB136) are threaded fastener inserts designed for securing pushrods, control horns, and other hardware in RC aircraft airframes where access to the back of a panel is limited or impossible. Blind nuts are pressed or bonded into place from one side, providing a solid threaded anchor point without needing a nut on the reverse side. These are a staple hardware item for anyone building or repairing RC aircraft, and the 6-32 thread size is one of the most commonly used in the hobby.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 thread size suits a wide range of standard RC aircraft hardware and fasteners\u003c\/li\u003e\n  \u003cli\u003eDesigned for installations where rear access is restricted, such as embedded in foam, balsa, or composite airframes\u003c\/li\u003e\n  \u003cli\u003eProvide a secure, reusable threaded anchor point for repeated removal and refitting of screws\u003c\/li\u003e\n  \u003cli\u003eUseful during both new builds and repairs where existing threads have stripped or failed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro 6-32 Blind Nuts (DUB136) — pack of blind nut inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate adhesive or installation method to set the blind nuts into your airframe material\u003c\/li\u003e\n  \u003cli\u003eScrews or bolts with 6-32 thread to use with the installed nuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277774727,"sku":"DUB136","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27425_Image1.jpg?v=1762811917"},{"product_id":"dura-collars-1-16-4pce","title":"Dubro Dura Collars 1\/16 RC Aircraft Spare Part - DUB137","description":"\u003cp\u003eThe Dubro 137 Dura Collars in 1\/16 inch size are precision shaft collars designed for securing control rods, pushrods, and wire shafts in RC aircraft builds and repairs. Sold in a pack of four under style code DUB137, these Dubro shaft collars are a practical workshop staple for anyone building or maintaining radio control aircraft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/16 inch bore size suits commonly used RC aircraft control rod and wire shaft diameters\u003c\/li\u003e\n  \u003cli\u003ePack of four collars provides enough for multiple control linkages in a single build\u003c\/li\u003e\n  \u003cli\u003eDura Collar construction is designed to grip securely and resist movement under flight loads\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight, adding negligible weight to the airframe\u003c\/li\u003e\n  \u003cli\u003eA recognised Dubro part number (DUB137) makes reordering straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4 x Dubro Dura Collars, 1\/16 inch bore (DUB137)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable 1\/16 inch control rods or wire shafts to mount the collars onto\u003c\/li\u003e\n  \u003cli\u003eSmall hex key or set screw tool for tightening (if not already in your toolkit)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277776519,"sku":"DUB137","price":6.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27426_Image1.jpg?v=1762811920"},{"product_id":"dura-collars-5-32-4pce","title":"Dubro Dura Collars 5\/32 RC Aircraft Spare Part - DUB140","description":"\u003cp\u003eThe Dubro Dura Collars in 5\/32 inch (DUB140) are precision shaft collars designed to secure pushrods, wire shafts, and control linkages on RC aircraft builds and repairs. Sold in a pack of four, these small but essential RC aircraft spare parts are a staple in any builder's toolkit, keeping rods and shafts firmly positioned under the vibration and stress of flight.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5\/32 inch bore size suits standard pushrod and wire shaft diameters commonly used in RC aircraft control systems\u003c\/li\u003e\n  \u003cli\u003eDura Collar construction provides a firm, reliable grip when the set screw is tightened, resisting slippage during flight\u003c\/li\u003e\n  \u003cli\u003ePack of four gives you enough collars to outfit multiple control linkages in a single build or repair session\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight, adding negligible weight to the airframe\u003c\/li\u003e\n  \u003cli\u003eA recognised Dubro part (DUB140) stocked widely for quick identification and reordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4 x Dubro Dura Collars, 5\/32 inch bore (DUB140)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSet screw tool or appropriate hex key to tighten the collar grub screws\u003c\/li\u003e\n  \u003cli\u003eCompatible 5\/32 inch pushrods or wire shafts (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277780871,"sku":"DUB140","price":8.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27429_Image1.jpg?v=1762811923"},{"product_id":"dura-collars-3-16-4pce","title":"Dubro Dura Collars 3\/16 RC Aircraft Spare Part - DUB141","description":"\u003cp\u003eThe Dubro Dura Collars 3\/16 (DUB141) are precision shaft collars designed to securely lock pushrods, wire shafts, and other RC aircraft components in place. Dubro is a long-established name in RC hardware, and these collars are a straightforward, reliable solution for builders and repairers working on fixed-wing aircraft, helicopters, and similar RC models that use 3\/16-inch diameter shafts or rods.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/16-inch internal diameter suits common RC aircraft pushrod and shaft sizes\u003c\/li\u003e\n  \u003cli\u003eDura Collar construction provides a firm, secure grip on metal and carbon fibre shafts\u003c\/li\u003e\n  \u003cli\u003eSet screw fastening locks the collar firmly in position without permanent modification\u003c\/li\u003e\n  \u003cli\u003ePack of four collars gives you enough for a full build or multiple repair jobs\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard Dubro-style hardware and widely used across RC aircraft builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4 x Dubro Dura Collars 3\/16 inch (DUB141)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate hex key or Allen wrench to tighten the set screws\u003c\/li\u003e\n  \u003cli\u003eRC aircraft or model requiring 3\/16-inch shaft collars for assembly or repair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277781447,"sku":"DUB141","price":8.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27430_Image1.jpg?v=1762811925"},{"product_id":"threaded-rod-4-40x12","title":"Dubro Threaded Rod 4-40x12 Tool - DUB144","description":"\u003cp\u003eThe Dubro DUB144 is a 4-40 threaded rod measuring 12 inches, designed for use as a linkage rod in RC aircraft builds and repairs. Dubro is a well-established name in RC hardware, and this threaded rod is a standard component used when fabricating or replacing push-pull linkages, control rod assemblies, and other mechanical connections in fixed-wing models and other RC aircraft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 thread standard, compatible with 4-40 clevis fittings, ball links, and threaded couplers commonly used in RC aircraft linkage setups\u003c\/li\u003e\n  \u003cli\u003e12-inch length provides ample material to cut to the required size for most control surface linkage runs\u003c\/li\u003e\n  \u003cli\u003eStraight, uniform threading along the full length allows clean, secure connections at both ends\u003c\/li\u003e\n  \u003cli\u003eSuitable for fabricating new linkages or replacing bent or damaged rods on existing models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Dubro 4-40 x 12-inch threaded rods (DUB144)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 clevis fittings, ball links, or threaded couplers to complete the linkage assembly\u003c\/li\u003e\n  \u003cli\u003eTools to cut and thread or trim the rod to your required length\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277782087,"sku":"DUB144","price":3.45,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/DUB144.jpg?v=1762811929"},{"product_id":"threaded-rod-4-40x30","title":"Dubro Threaded Rod 4-40x30 Tool - DUB145","description":"\u003cp\u003eThe Dubro DUB145 is a 4-40 x 30 threaded rod designed for use in RC aircraft linkage and control surface setups. Dubro's threaded hardware is a staple in the RC aircraft world, and this 4-40 specification rod is commonly used to build or repair push-pull linkages, throttle connections, and steering assemblies. If you're building a linkage from scratch or replacing a worn rod, the DUB145 gives you a reliable, standard-thread component that works with compatible 4-40 hardware throughout your airframe.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 thread specification — compatible with standard 4-40 RC linkage hardware including clevises, ball links, and turnbuckles\u003c\/li\u003e\n  \u003cli\u003e30mm length suits a range of short to medium linkage runs in RC aircraft builds\u003c\/li\u003e\n  \u003cli\u003eMetal construction provides the rigidity needed for precise control surface response\u003c\/li\u003e\n  \u003cli\u003ePart of Dubro's established range of RC linkage hardware, making it straightforward to source matching components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB145 4-40 x 30 threaded rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible 4-40 clevises, ball links, or turnbuckles to complete the linkage assembly\u003c\/li\u003e\n  \u003cli\u003eThreadlock or appropriate fastening method depending on your installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277782727,"sku":"DUB145","price":2.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/DUB145.jpg?v=1762811932"},{"product_id":"1-45-inch-micro-wheel","title":"Dubro 1.45in Micro RC Wheel - DUB145MS","description":"\u003cp\u003eThe Dubro DUB145MS is a 1.45-inch micro wheel designed for use on lightweight RC aircraft where small, precise wheels are needed for ground handling and takeoff. Dubro is a well-established name in RC aircraft hardware, and this micro wheel is built to the same standard as the rest of their wheel range — consistent sizing, reliable construction, and a fit that works with typical micro aircraft landing gear wire diameters. If you're building or repairing a small fixed-wing model or park flyer, these RC aircraft wheels are a straightforward, dependable choice.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.45-inch diameter makes these suitable for micro and mini fixed-wing RC aircraft\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps added weight to a minimum on small airframes\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit standard micro landing gear wire used on typical park flyers and slow flyers\u003c\/li\u003e\n  \u003cli\u003eDubro RC wheels are a recognised standard in the RC aircraft spares market, making sourcing straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro and mini fixed-wing RC aircraft with appropriately sized landing gear wire\u003c\/li\u003e\n  \u003cli\u003ePark flyers and slow flyers requiring 1.45-inch wheels\u003c\/li\u003e\n  \u003cli\u003eRC aircraft landing gear setups compatible with Dubro micro wheel bore sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro 145MS 1.45-inch micro wheel (quantity as supplied — confirm at point of purchase)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277783815,"sku":"DUB145MS","price":10.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27434_Image1.jpg?v=1752117699"},{"product_id":"tailwheel-1-1-2-in","title":"Dubro 1-1\/2in RC Aircraft Tailwheel - DUB150TW","description":"\u003cp\u003eThe Dubro 150TW is a 1-1\/2 inch tailwheel designed as a direct replacement or fitment part for RC aircraft that use a conventional taildragger landing gear configuration. Dubro is a well-established name in RC aircraft hardware, and this tailwheel is built to the same standard dimensions hobbyists have relied on for decades. Whether you're repairing a damaged tailwheel on an existing model or setting up a scratch-built or kit plane, the DUB150TW offers a straightforward, dependable solution.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/2 inch (38mm) diameter tailwheel suited to a range of RC aircraft sizes\u003c\/li\u003e\n  \u003cli\u003eDubro construction to the brand's established quality standard for RC landing gear hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned for conventional taildragger aircraft configurations\u003c\/li\u003e\n  \u003cli\u003eStraightforward fitment makes it a practical spare to keep on hand for field repairs\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard RC tailwheel assemblies — check your model's tailwheel bracket bore size before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRC aircraft with conventional taildragger landing gear configurations\u003c\/li\u003e\n  \u003cli\u003eModels requiring a 1-1\/2 inch tailwheel\u003c\/li\u003e\n  \u003cli\u003eScratch-built and kit-built RC planes using standard tailwheel hardware\u003c\/li\u003e\n  \u003cli\u003eDubro and compatible aftermarket tailwheel brackets accepting this wheel size\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro 150TW 1-1\/2 inch tailwheel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277784135,"sku":"DUB150TW","price":14.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27435_Image1.jpg?v=1762885678"},{"product_id":"nose-gear-bent","title":"Dubro Nose Gear Bent RC Aircraft Part - DUB152","description":"Dubro 152 NOSE GEAR BENT","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277784263,"sku":"DUB152","price":23.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27436_Image1.jpg?v=1752012562"},{"product_id":"steerable-nose-gear-straight","title":"Dubro Steerable Nose Gear Straight RC Aircraft Spare Part - DUB153","description":"\u003cp\u003eThe Dubro DUB153 Steerable Nose Gear Straight is a replacement nose wheel assembly designed for RC aircraft that require a functional, steerable front landing gear setup. Dubro is a well-established name in RC aircraft hardware, and this nose gear unit is built to integrate with standard RC plane steering linkages, giving you directional control on the ground during taxiing, take-off, and landing rolls.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStraight nose gear configuration suits aircraft with a conventional tricycle undercarriage layout\u003c\/li\u003e\n  \u003cli\u003eSteerable design connects to your aircraft's steering servo for ground directional control\u003c\/li\u003e\n  \u003cli\u003eDubro hardware is known for consistent fit and durability in RC aircraft applications\u003c\/li\u003e\n  \u003cli\u003eSuitable as a direct replacement for worn or damaged nose gear assemblies\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard RC aircraft building and repair setups using typical pushrod linkages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB153 Steerable Nose Gear Straight unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable nose wheel to fit the gear wire diameter\u003c\/li\u003e\n  \u003cli\u003eSteering linkage rod and clevis to connect to your aircraft's rudder or nose gear servo\u003c\/li\u003e\n  \u003cli\u003eAppropriate tools for installation (e.g. pliers, screwdriver)\u003c\/li\u003e\n  \u003cli\u003eCompatible RC aircraft airframe requiring a steerable nose gear\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277785159,"sku":"DUB153","price":16.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27437_Image1.jpg?v=1762811937"},{"product_id":"universal-nose-gear-5-32-wire","title":"Dubro Universal Nose 5\/32 Wire RC Aircraft Landing Gear - DUB154","description":"\u003cp\u003eThe Dubro Universal Nose Gear (DUB154) is a replacement nose gear unit built for RC aircraft using 5\/32 inch wire, suitable across a wide range of fixed-wing models where a standard nose gear assembly is required. Dubro is a well-established name in RC plane hardware, and this universal nose gear is designed to fit a broad selection of aircraft rather than being locked to a single model — making it a practical spare to have on hand for repairs or builds.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt around 5\/32 inch wire diameter, matching a common size used across many RC aircraft landing gear setups\u003c\/li\u003e\n  \u003cli\u003eUniversal fitment design means it can suit a range of fixed-wing models rather than being model-specific\u003c\/li\u003e\n  \u003cli\u003eDurable Dubro construction, consistent with the brand's reputation for reliable RC aircraft hardware\u003c\/li\u003e\n  \u003cli\u003eSuitable for use as a direct replacement nose gear on aircraft where the original has been damaged or worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRC aircraft using 5\/32 inch nose gear wire\u003c\/li\u003e\n  \u003cli\u003eFixed-wing models requiring a universal nose gear fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro Universal Nose Gear unit (5\/32 wire) — DUB154\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277785863,"sku":"DUB154","price":10.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27438_Image1.jpg?v=1752012568"},{"product_id":"steering-arm-ass-1-1-4-nylon","title":"Dubro 1-1\/4in Nylon Steering Arm Assembly RC Aircraft Spare Part - DUB155","description":"\u003cp\u003eThe Dubro DUB155 Steering Arm Assembly is a 1-1\/4 inch nylon steering arm designed as a direct replacement or functional component for radio control aircraft builds and repairs. Dubro is a long-established name in RC hardware, and this nylon steering arm is a practical spares-box staple for anyone working on RC aircraft linkage and control surface setups. The nylon construction offers a degree of flex and impact resistance that makes it a sensible choice for nose gear and steering linkage applications where a rigid metal arm might cause damage on hard landings.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNylon construction provides impact resistance and light weight suitable for RC aircraft steering linkage use\u003c\/li\u003e\n  \u003cli\u003e1-1\/4 inch arm length suits a range of small to medium RC aircraft steering and control setups\u003c\/li\u003e\n  \u003cli\u003ePart number DUB155 makes identification straightforward when ordering spares or matching to existing Dubro hardware\u003c\/li\u003e\n  \u003cli\u003eSold as an assembly, making it a ready-to-fit unit for repair or build projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro DUB155 Nylon Steering Arm Assembly (1-1\/4 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible RC aircraft requiring a 1-1\/4 inch steering arm\u003c\/li\u003e\n  \u003cli\u003eAppropriate clevis, rod, or linkage hardware to complete the installation (sold separately)\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools for fitting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277787207,"sku":"DUB155","price":7.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27439_Image1.jpg?v=1762811941"},{"product_id":"nylon-nose-gear-block-5-32","title":"Dubro Nylon Nose Gear Block 5\/32 RC Aircraft Part - DUB156","description":"\u003cp\u003eThe Dubro DUB156 nylon nose gear block is a 5\/32 inch landing gear mounting block designed for use in RC aircraft builds and repairs. Made from nylon, it provides a lightweight yet durable solution for securing nose gear wire on fixed-wing RC planes. If you're building or repairing an RC aircraft that uses 5\/32 inch diameter nose gear wire, this is the correct size block to match.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSized for 5\/32 inch nose gear wire, ensuring a secure and correctly fitted installation\u003c\/li\u003e\n  \u003cli\u003eNylon construction keeps weight low while offering adequate durability for typical RC aircraft landing loads\u003c\/li\u003e\n  \u003cli\u003eStandard Dubro fitment design compatible with common nose gear wire setups used across a wide range of RC planes\u003c\/li\u003e\n  \u003cli\u003eSuitable for both new builds and replacing worn or damaged nose gear blocks on existing models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro DUB156 nylon nose gear block (5\/32 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5\/32 inch nose gear wire (if not already fitted to your aircraft)\u003c\/li\u003e\n  \u003cli\u003eAppropriate adhesive or hardware to mount the block to your aircraft's fuselage, depending on your airframe construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277787719,"sku":"DUB156","price":11.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27440_Image1.jpg?v=1752012573"},{"product_id":"10-32-x-2-nylon-wing-bolts","title":"Dubro 10-32 x 2 Nylon Wing Bolts RC Aircraft Part - DUB164","description":"\u003cp\u003eThe Dubro DUB164 10-32 x 2 nylon wing bolts are a purpose-made fastener solution for securing wings on RC aircraft. Nylon construction keeps weight minimal and eliminates the risk of metal corrosion, making these RC plane hardware staples a sensible choice for fixed-wing builds and repairs. The 10-32 thread size is a widely used standard in the RC aircraft world, so these bolts suit a broad range of wing attachment setups.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-32 x 2 inch thread specification matches a common RC aircraft wing mounting standard\u003c\/li\u003e\n  \u003cli\u003eNylon material reduces weight compared to metal fasteners and won't corrode\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for wing attachment duty on fixed-wing RC planes\u003c\/li\u003e\n  \u003cli\u003eStraightforward replacement for worn, stripped, or lost wing bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro 10-32 x 2 nylon wing bolts (quantity as per pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible 10-32 nylon insert or T-nut installed in the wing for secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277793415,"sku":"DUB164","price":6.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/DUB164.jpg?v=1752012580"},{"product_id":"steering-arm-nylon-1-25in","title":"Dubro Steering Arm Nylon 1.25in RC Aircraft Spare Part - DUB166","description":"\u003cp\u003eThe Dubro DUB166 steering arm is a nylon replacement part for RC aircraft, designed to connect pushrods or control rods to the nose gear steering mechanism. At 1.25 inches in length, this steering arm suits a wide range of radio control aircraft builds and repairs where a durable, lightweight nylon component is needed. Dubro is a well-established name in RC hardware, and this part is a practical stock item for modellers who want a reliable spare on hand.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMoulded from nylon for a good balance of strength and light weight\u003c\/li\u003e\n  \u003cli\u003e1.25 inch length suits a range of nose gear and steering linkage setups\u003c\/li\u003e\n  \u003cli\u003eStandard geometry fits common Dubro-style connectors and pushrod hardware\u003c\/li\u003e\n  \u003cli\u003eSuitable as a direct replacement when an existing steering arm is worn or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB166 nylon steering arm (1.25in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible RC aircraft to fit the part to\u003c\/li\u003e\n  \u003cli\u003eAppropriate pushrod or control rod hardware if not already installed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277795591,"sku":"DUB166","price":7.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27446_Image1.jpg?v=1762811946"},{"product_id":"90-deg-nylon-bellcrank-assemb","title":"Dubro 90 Degree Nylon Bellcrank Assembly RC Aircraft Part - DUB167","description":"\u003cp\u003eThe Dubro 90 Degree Nylon Bellcrank Assembly (DUB167) is a flight control linkage component designed for use in RC aircraft builds and repairs. A bellcrank converts the direction of a pushrod or cable, making it a key part in control surface setups where a 90-degree change in linkage direction is needed. Dubro is a long-established name in RC hardware, and the DUB167 is built from nylon for lightweight, corrosion-resistant performance in the airframe.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree bellcrank geometry redirects control linkage inputs through a right-angle path\u003c\/li\u003e\n  \u003cli\u003eNylon construction keeps weight low and resists corrosion in typical flying conditions\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in ailerons, elevator, or rudder linkage systems where a direction change is required\u003c\/li\u003e\n  \u003cli\u003eA recognised Dubro part number (DUB167) making it straightforward to source as a direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Dubro 90 Degree Nylon Bellcrank Assembly (DUB167)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate pushrods, clevis connectors, and mounting hardware for your specific airframe\u003c\/li\u003e\n  \u003cli\u003eTools for installation (screwdriver, drill, or similar depending on your build)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277797639,"sku":"DUB167","price":5.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27447_Image1.jpg?v=1762811949"},{"product_id":"nylon-lock-nuts-6-32","title":"Dubro Nylon Lock Nuts 6-32 RC Aircraft Spare Part - DUB171","description":"\u003cp\u003eThe Dubro 171 Nylon Lock Nuts in 6-32 thread size are small-aircraft hardware fasteners designed to secure screws and bolts against loosening caused by vibration in RC aircraft builds and repairs. Stocked under part number DUB171, these are a practical consumable for any RC builder who works regularly with 6-32 threaded hardware.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 thread size suits a common standard used across RC aircraft linkages, motor mounts, and control surface hardware\u003c\/li\u003e\n  \u003cli\u003eNylon insert locking mechanism resists vibration-induced loosening without the need for thread-locking fluid\u003c\/li\u003e\n  \u003cli\u003eLightweight nylon-insert construction keeps added weight minimal, relevant in weight-sensitive aircraft applications\u003c\/li\u003e\n  \u003cli\u003eDubro hardware is widely trusted in RC aircraft building for consistent thread fit and reliable hold\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB171 Nylon Lock Nuts, 6-32 thread (quantity as packaged)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate 6-32 threaded screws or bolts for your specific application\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools for installation (screwdriver or nut driver)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277799751,"sku":"DUB171","price":5.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27451_Image1.jpg?v=1762811952"},{"product_id":"threaded-rod-2-56x12","title":"Dubro Threaded Rod 2-56x12 Tool - DUB172","description":"\u003cp\u003eThe Dubro DUB172 is a 2-56 x 12 threaded rod designed for use in RC aircraft linkage and pushrod assemblies. Dubro is a well-established name in RC hardware, and this threaded rod is a standard component used to connect control horns, clevis ends, and other linkage hardware in the control systems of fixed-wing RC models. The 2-56 thread size is one of the most common standards in RC aircraft, making this a practical stock item for builders and those carrying out repairs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 thread size — the most widely used standard thread in RC aircraft control linkages\u003c\/li\u003e\n  \u003cli\u003e12-inch length provides material to cut or configure to your specific pushrod requirements\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 2-56 clevis and threaded coupler hardware\u003c\/li\u003e\n  \u003cli\u003eSuitable for aileron, elevator, rudder, and throttle linkage assemblies\u003c\/li\u003e\n  \u003cli\u003eDubro manufacture, ensuring consistent thread quality for reliable hardware connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB172 2-56 x 12 threaded rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 clevis or ball link hardware to complete a linkage assembly\u003c\/li\u003e\n  \u003cli\u003ePushrod wire or tube if building a full control rod\u003c\/li\u003e\n  \u003cli\u003eThread-cutting tools if shortening or customising the rod length\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277800071,"sku":"DUB172","price":3.45,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/DUB172.jpg?v=1762811955"},{"product_id":"threaded-rod-2-56x30","title":"Dubro Threaded Rod 2-56x30 Tool - DUB173","description":"\u003cp\u003eThe Dubro 173 threaded rod (DUB173) is a 2-56 x 30mm steel linkage rod used in RC aircraft control systems for connecting pushrods, clevis ends, and control horns. Dubro is a long-established name in RC linkage hardware, and this threaded rod is a practical spare or build component for anyone constructing or maintaining a fixed-wing aircraft. The 2-56 thread standard is widely used across RC aircraft linkage hardware, making it straightforward to pair with compatible clevis fittings and threaded couplers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 x 30mm threaded rod sized for standard RC aircraft linkage applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2-56 threaded clevis fittings and rod couplers commonly used in RC aircraft builds\u003c\/li\u003e\n  \u003cli\u003eSuitable for aileron, elevator, rudder, and throttle linkage setups\u003c\/li\u003e\n  \u003cli\u003eCompact length suitable for smaller control runs or trimming to length as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB173 2-56 x 30mm threaded rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 threaded clevis fittings or rod couplers to complete the linkage\u003c\/li\u003e\n  \u003cli\u003eAppropriate tools for cutting or shaping the rod if length adjustment is required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277800327,"sku":"DUB173","price":2.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27453_Image1.jpg?v=1762811958"},{"product_id":"wheels-super-lite-1-3-4-in","title":"Dubro 1.75in Super Lite RC Wheel (Pair) - DUB175SL","description":"\u003cp\u003eThe Dubro 175SL Super Lite wheels are a 1.75 inch (44.45 mm) lightweight RC aircraft wheel set designed for weight-conscious builds where reducing rotating mass matters. Sold as a pair under part number DUB175SL, these radio control wheels are a popular choice for scratch-built and kit-built fixed-wing aircraft where a balance of durability and low weight is needed. Dubro has a long-standing reputation in the RC aircraft spares market, and the Super Lite range reflects that focus on functional, no-fuss components.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 inch (44.45 mm) diameter suits a wide range of small to mid-size fixed-wing RC aircraft\u003c\/li\u003e\n  \u003cli\u003eSuper Lite construction reduces unsprung weight compared to standard foam or rubber wheels\u003c\/li\u003e\n  \u003cli\u003eSold as a matched pair, making them suitable for main gear installations\u003c\/li\u003e\n  \u003cli\u003eDUB175SL is a widely stocked Dubro part, making future replacement straightforward\u003c\/li\u003e\n  \u003cli\u003eSuitable for both replacement and new builds requiring a lightweight wheel at this diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFixed-wing RC aircraft with 1.75 inch main gear wheel requirements\u003c\/li\u003e\n  \u003cli\u003eScratch-built RC aircraft using standard axle sizes compatible with Dubro Super Lite hubs\u003c\/li\u003e\n  \u003cli\u003eKit-built RC aircraft specifying Dubro 175SL or equivalent 44.45 mm wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 pair of Dubro 175SL Super Lite wheels (2 wheels total)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277806151,"sku":"DUB175SL","price":18.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27457_Image1.jpg?v=1752012598"},{"product_id":"treaded-wheels-1-3-4in","title":"Dubro 1.75in (44.45mm) Treaded RC Wheel - 1 Pair - DUB175T","description":"\u003cp\u003eThe Dubro DUB175T 1.75 inch (44.45mm) treaded wheels are a pair of RC aircraft wheels designed for use on light aircraft, trainers, and sport planes where grip on grass or uneven ground is needed. The treaded tread pattern gives the tyre more purchase on soft or rough surfaces compared to a smooth tyre, making these a practical choice for flying sites that aren't tarmac. At 1.75 inches in diameter, they suit a range of smaller to mid-size RC aircraft builds and are a widely used Dubro wheel size among scratch builders and kit builders alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 inch (44.45mm) diameter suits a range of light RC aircraft and trainer builds\u003c\/li\u003e\n  \u003cli\u003eTreaded tyre pattern provides improved grip on grass, gravel, and uneven surfaces\u003c\/li\u003e\n  \u003cli\u003eSold as a pair, so both main gear wheels are covered in one purchase\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps unsprung weight low, which matters on nose-heavy or tail-dragger setups\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard RC aircraft axle hardware commonly used in the Dubro range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRC aircraft with 1.75 inch wheel fitment\u003c\/li\u003e\n  \u003cli\u003eTrainer and sport aircraft builds requiring treaded RC wheels\u003c\/li\u003e\n  \u003cli\u003eScratch-built and kit-built RC aircraft using standard axle hardware\u003c\/li\u003e\n  \u003cli\u003eDubro axle and landing gear components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 inch treaded RC aircraft wheels x 2 (one pair)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277809415,"sku":"DUB175T","price":19.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27458_Image1.jpg?v=1762811960"},{"product_id":"treated-lite-wheels-2-1-3-4in","title":"Dubro 1.75in (44.45mm) Treaded Lightweight RC Wheel \u0026amp; Tyre Set - DUB175TL","description":"\u003cp\u003eThe Dubro 175TL Treaded Lightweight Wheels are a 1.75-inch (44.45mm) foam RC aircraft wheel set designed for use on paved runways and smooth surfaces. Sold as a pair under style code DUB175TL, these radio control wheels feature a foam core for weight saving and shock absorption, wrapped in a tough treaded outer skin built to handle the repeated stresses of takeoffs and landings. At 12.8g per wheel and a width of 0.675 inches (17mm), they suit a wide range of lightweight fixed-wing RC aircraft that use a standard 1\/8-inch (3mm) axle diameter.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFoam core construction keeps weight to 12.8g per wheel while providing natural shock absorption on landing\u003c\/li\u003e\n  \u003cli\u003eTough treaded outer skin resists fuel contact and surface wear, making them well suited to paved runways\u003c\/li\u003e\n  \u003cli\u003e1\/8-inch (3mm) axle diameter fits a broad range of standard RC aircraft undercarriage setups\u003c\/li\u003e\n  \u003cli\u003e44.45mm diameter and 17mm width give a compact, low-drag profile appropriate for trainer and sport fixed-wing models\u003c\/li\u003e\n  \u003cli\u003eSold as a matched pair, so both main gear wheels are replaced in one purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRC fixed-wing aircraft with 1\/8-inch (3mm) axle diameter undercarriage\u003c\/li\u003e\n  \u003cli\u003eTrainer, sport, and park-flyer aircraft operating from paved or hard surfaces\u003c\/li\u003e\n  \u003cli\u003eAny RC aircraft undercarriage accepting a 1.75-inch wheel diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Dubro 175TL 1.75-inch Treaded Lightweight Wheels (1 pair)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277810631,"sku":"DUB175TL","price":24.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27459_Image1.jpg?v=1762811964"},{"product_id":"tailwheel-1-3-4","title":"Dubro 1-3\/4in Tailwheel RC Aircraft Part - DUB175TW","description":"\u003cp\u003eThe Dubro 175TW is a 1-3\/4 inch tailwheel assembly designed as a replacement or spare part for RC aircraft landing gear setups requiring a rear wheel in that size. Dubro is a well-established name in radio control aircraft hardware, and the 175TW is a straightforward, fit-for-purpose tailwheel suited to a range of fixed-wing RC planes that use conventional tricycle or tail-dragger landing gear configurations. If you're repairing a damaged tailwheel or building a scratch or kit aircraft that needs a rear wheel in this size, this is a practical, reliable choice from a trusted manufacturer.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1-3\/4 inch (approximately 44mm) diameter wheel size suits a range of RC aircraft tailwheel assemblies\u003c\/li\u003e\n  \u003cli\u003eDesigned for use in tail-dragger landing gear configurations on fixed-wing RC planes\u003c\/li\u003e\n  \u003cli\u003eDubro part number 175TW for straightforward identification and reordering\u003c\/li\u003e\n  \u003cli\u003eLightweight construction appropriate for typical RC aircraft weight requirements\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard tailwheel hardware and steering linkages commonly found on sport and trainer aircraft builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Dubro 175TW 1-3\/4 inch tailwheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTailwheel bracket or steering assembly to mount the wheel (not included)\u003c\/li\u003e\n  \u003cli\u003eAppropriate axle hardware to fit your specific aircraft landing gear setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277810823,"sku":"DUB175TW","price":16.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27460_Image1.jpg?v=1752012605"},{"product_id":"bolt-set-w-lock-nuts-6-32x1-4","title":"Dubro Bolt Set with Lock Nuts 6-32x1\/4 Tool - DUB177","description":"\u003cp\u003eThe Dubro DUB177 bolt set provides 6-32 x 1\/4 inch bolts with matching lock nuts, designed for use in RC aircraft builds and repairs. Dubro is a well-established name in RC hardware, and this fastener set covers common fixing tasks where a secure, vibration-resistant connection is needed on airframes, motor mounts, servo horns, and similar assemblies.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 x 1\/4 inch thread size suits a wide range of standard RC aircraft hardware applications\u003c\/li\u003e\n  \u003cli\u003eLock nuts are included to resist loosening caused by motor vibration during flight\u003c\/li\u003e\n  \u003cli\u003eSmall, consistent fasteners suitable for lightweight airframe construction and component mounting\u003c\/li\u003e\n  \u003cli\u003eUseful to keep in your field kit as a direct replacement when bolts are lost or damaged during maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 x 1\/4 inch bolts\u003c\/li\u003e\n  \u003cli\u003eMatching 6-32 lock nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate screwdriver or hex key to suit bolt head type\u003c\/li\u003e\n  \u003cli\u003eThread-locking compound (optional, for additional vibration resistance)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277814215,"sku":"DUB177","price":5.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27462_Image1.jpg?v=1752012609"},{"product_id":"skt-hd-bolt-w-lck-nuts-4-40x1","title":"Dubro HD Bolt with Lock Nuts 4-40x1 Tool - DUB178","description":"\u003cp\u003eThe Dubro DUB178 is a set of 4-40 x 1 inch socket head bolts with matching lock nuts, designed for use in RC aircraft builds and repairs. Dubro hardware is a trusted staple in the RC aviation hobby, and the 4-40 thread size is one of the most commonly used fastener standards in RC airframe construction. These socket head bolts provide a secure, reliable fastening point wherever precise mechanical connections are needed on a model aircraft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 x 1 inch socket head bolt specification — a standard thread size widely used in RC aircraft hardware\u003c\/li\u003e\n  \u003cli\u003eLock nuts included to prevent fasteners from backing out under vibration during flight\u003c\/li\u003e\n  \u003cli\u003eSocket head design allows tightening with a hex key for better torque control in tight spaces\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in control linkages, servo mounts, landing gear, and general airframe assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-40 x 1 inch socket head bolts\u003c\/li\u003e\n  \u003cli\u003eMatching 4-40 lock nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate hex key or Allen wrench to fit the socket head bolt drive size\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277814471,"sku":"DUB178","price":8.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27463_Image1.jpg?v=1762811971"},{"product_id":"sock-head-bolt-set-6-32x1","title":"Dubro Sock Head Bolt Set 6-32x1 Tool - DUB179","description":"\u003cp\u003eThe Dubro DUB179 socket head bolt set provides 6-32 x 1 inch fasteners designed for use in RC aircraft assembly and repair. Dubro is a well-established name in RC hardware, and these socket head bolts are a practical stock item for builders and flyers who need reliable fasteners on hand for airframe work, motor mounts, control horn linkages, and similar applications.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 x 1 inch thread specification suits a range of standard RC aircraft hardware fittings\u003c\/li\u003e\n  \u003cli\u003eSocket head drive style allows precise tightening with a hex key in tight or recessed areas\u003c\/li\u003e\n  \u003cli\u003eDubro RC fasteners are a trusted choice for scratch builders and kit builders working on fixed-wing aircraft\u003c\/li\u003e\n  \u003cli\u003eUseful as replacement hardware when original bolts are lost or damaged during maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB179 socket head bolt set (6-32 x 1 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate hex key or Allen wrench to drive the socket head bolts\u003c\/li\u003e\n  \u003cli\u003eCompatible 6-32 nuts or threaded inserts depending on your application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277815751,"sku":"DUB179","price":7.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27464_Image1.jpg?v=1762811974"},{"product_id":"2-56-threaded-ball-link","title":"Dubro 2-56 Threaded Ball Link RC Aircraft Spare Part - DUB181","description":"\u003cp\u003eThe Dubro 2-56 Threaded Ball Link (DUB181) is a precision control linkage component designed for use in RC aircraft pushrod and servo linkage systems. Ball links allow a rod end to pivot freely in multiple directions, preventing binding in control runs where the angle between the servo arm and control surface horn changes through the range of movement. The 2-56 thread size is a standard imperial sizing widely used in small to mid-size RC aircraft linkage hardware.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 threaded shank for compatibility with standard 2-56 pushrods and threaded rods\u003c\/li\u003e\n  \u003cli\u003eBall-and-socket design allows multi-axis pivot, reducing binding in control linkages\u003c\/li\u003e\n  \u003cli\u003eSuitable for aileron, elevator, and rudder control runs where precise, free movement is needed\u003c\/li\u003e\n  \u003cli\u003eMade by Dubro, a long-established supplier of RC aircraft linkage hardware and accessories\u003c\/li\u003e\n  \u003cli\u003eSmall, lightweight construction suited to park flyers, trainers, and sport aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro 2-56 Threaded Ball Link (DUB181)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible 2-56 threaded pushrod or control rod (sold separately)\u003c\/li\u003e\n  \u003cli\u003eMatching ball link socket or clevis depending on your control surface horn arrangement (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277816007,"sku":"DUB181","price":9.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27466_Image1.jpg?v=1762811977"},{"product_id":"aileron-connector","title":"Dubro Aileron Connector RC Aircraft Accessory - DUB183","description":"\u003cp\u003eThe Dubro DUB183 Aileron Connector is a control linkage accessory designed for use in RC aircraft builds and repairs where precise aileron control is required. Dubro is a well-regarded name in radio control hardware, and this connector is built to provide a reliable, secure link between servo output and aileron control surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically as an aileron connector for RC aircraft control linkage setups\u003c\/li\u003e\n  \u003cli\u003eDubro hardware is known for consistent fit and durability in demanding RC applications\u003c\/li\u003e\n  \u003cli\u003eSuitable for use during new builds or as a replacement connector when existing linkage hardware wears or fails\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight, keeping added weight to a minimum on your aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB183 Aileron Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible RC aircraft requiring aileron control linkage hardware\u003c\/li\u003e\n  \u003cli\u003eAppropriate pushrods or clevis hardware to complete the control linkage installation\u003c\/li\u003e\n  \u003cli\u003eBasic RC modelling tools for fitting and adjustment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277816391,"sku":"DUB183","price":10.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27467_Image1.jpg?v=1752012617"},{"product_id":"nylon-kwik-link-2-56x12","title":"Dubro Nylon Kwik-Link 2-56x12 RC Linkage Connector - DUB184","description":"\u003cp\u003eThe Dubro DUB184 Nylon Kwik-Link is a 2-56 threaded pushrod connector designed for use in RC aircraft control linkages. It provides a quick and secure connection between a 2-56 threaded pushrod and a control horn or servo arm, making it a practical choice for builders setting up or adjusting flight control systems. The nylon construction keeps weight low while offering enough durability for typical RC aircraft use.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 thread size suits standard RC aircraft pushrods and is widely compatible with common servo and control horn setups\u003c\/li\u003e\n  \u003cli\u003eNylon construction reduces weight and resists corrosion compared to metal alternatives\u003c\/li\u003e\n  \u003cli\u003eKwik-Link design allows the connector to be attached and detached from control horns without tools, simplifying in-field adjustments\u003c\/li\u003e\n  \u003cli\u003eSold as part number DUB184, making it straightforward to reorder or match with other Dubro 2-56 series hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDubro DUB184 Nylon Kwik-Link 2-56 connectors (quantity per pack — refer to packaging for count)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-56 threaded pushrod to suit the connector\u003c\/li\u003e\n  \u003cli\u003eCompatible RC aircraft control horns or servo arms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dubro","offers":[{"title":"Default Title","offer_id":49277819783,"sku":"DUB184","price":18.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2194\/5657\/files\/27468_Image1.jpg?v=1762811979"}],"url":"https:\/\/www.hobbycity.nz\/collections\/rc-aircraft-spares.oembed?page=4","provider":"Hobby City NZ","version":"1.0","type":"link"}