Skip to content
Our retails store is open 7 days a week during level 1 and 2
Our retails store is open 7 days a week during level 1 and 2

Castle Creations CSE010012900 Talon 15 - 15A ESC w/Heavy Duty BEC

$89.95
SKU CSE010012900

Castle Creations CSE010012900 Talon 15 - 15A ESC w/Heavy Duty BEC

The Talon 15 is a 15 amp controller with an outlandish 8 amp BEC. Applications range from foamies to micro, and sub-micro helis running up to 4S and pulling 15 amps. As with any Castle ESC, the Talon 15 offers Castle's industry-leading functions, and easy programming using the Castle Link USB adapter, or the Castle Field Link Portable Programmer (sold separately).

TECHNICAL SPECIFICATIONS
Input Voltage Range: MIN 2S LiPo, MAX 4S LiPo
Max Continuous Amperage @ Full Throttle: 15 amps*
Max Voltage: N/A
BEC Voltage: 5.5 volts
BEC Output: 8 amp peak**, 3 amp continuous (always check servo draw prior to first flight)
Width: 0.58" (14.7mm)
Length: 1.10" (27.9mm)
Depth: 0.32" (8.1mm)
Weight: 0.25 oz. (7.2g) with wires, 0.12 oz (3.4g) without wires
Connectors: N/A
Needed For Operation (Sold Separately): Battery connectors, motor connectors
Product Use Statements: N/A
Application Guidelines: N/A
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: Yes, except Battery Current
Tech Notes: N/A

NOTES
*RC HOBBY APPLICATION RATING: 15 amps for the duration of a single 1,500 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air and minimal BEC load. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.

**Peak indicates amperage sustainable for 0.5 seconds - long enough for most servos’ current draw transients. Always confirm servo current draw before the first flight of the model.